20110924023569A

Accident · Substantial damage

FAA accident report · Beech 36 · Riverton, WY · September 24, 2011

Date
September 24, 2011 · 10:00 local
Place
Riverton, WY
Airport
Riverton Regional
Phase of flight
Landing: Rollout
Operating rules
General operating rules (Part 91)
Damage
Substantial damage
Aircraft
N7549N
NTSB investigation
NTSBWPR11CA468
Reported as
Beech 36
Reported engine
Continental IO-520 series
People aboard
1
Fatal injuries
0
Other injuries
0
Pilot’s certificate
Private pilot
Pilot’s flight hours
250 total125 in this make and model20 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

On September 24th, 2011 at approximately 10:00 MDT, N7549N, a Beechcraft model 36 aircraft sustained substantial damage when upon landing roll out the landing gear collapsed at Riverton (kriw) airport WY. There was no injuries to the sole occupant on board. Weather at the time was VMC.

As the FAA filed it

ON SEPTEMBER 24TH, 2011 AT APPROXIMATELY 10:00 MDT, N7549N, A BEECHCRAFT MODEL 36 AIRCRAFT SUSTAINED SUBSTANTIAL DAMAGE WHEN UPON LANDING ROLL OUT THE LANDING GEAR COLLAPSED AT RIVERTON (KRIW) AIRPORT WY. THERE WAS NO INJURIES TO THE SOLE OCCUPANT ON BOARD. WEATHER AT THE TIME WAS VMC.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.