20120312003709A

Accident · Substantial damage

FAA accident report · Bell 206L-3 · March 12, 2012

Date
March 12, 2012 · 10:30 local
Phase of flight
Hover/Holding
Operating rules
General operating rules (Part 91)
Operator
AC2A
Damage
Substantial damage
Aircraft
N104LP
NTSB investigation
NTSBCEN12CA191
Reported as
Bell 206L-3
Reported engine
Allison 250-C30 series
People aboard
1
Fatal injuries
0
Other injuries
0
Pilot’s certificate
Commercial pilot
Pilot’s flight hours
4,400 total2,300 in this make and model98 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

During attempted takeoff the aircraft rolled over onto right side. Main rotor blade struck the steel platform causing substaintial damage to aircraft. Pilot failed to complete a through preflight and left the right tie down attached to the aircraft.

As the FAA filed it

DURING ATTEMPTED TAKEOFF THE AIRCRAFT ROLLED OVER ONTO RIGHT SIDE. MAIN ROTOR BLADE STRUCK THE STEEL PLATFORM CAUSING SUBSTAINTIAL DAMAGE TO AIRCRAFT. PILOT FAILED TO COMPLETE A THROUGH PREFLIGHT AND LEFT THE RIGHT TIE DOWN ATTACHED TO THE AIRCRAFT.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.