20201107014879A

Accident · Substantial damage

FAA accident report · Schweizer 269C · Bowman, ND · November 7, 2020

Date
November 7, 2020 · 17:30 local
Place
Bowman, ND
Phase of flight
Landing: Touchdown
Operating rules
General operating rules (Part 91)
Damage
Substantial damage
Aircraft
N2081G
NTSB investigation
NTSBCEN21LA081
Reported as
Schweizer 269C
Reported engine
Lycoming HIO-360 series
People aboard
2
Fatal injuries
0
Other injuries
0
Pilot’s certificates
Commercial pilot, flight instructor
Pilot’s flight hours
3,850 total680 in this make and model13 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

The pilot stated had was hovering and looking for a place to set down. He then saw a place he thought was suitable and landed. He stated as he landed the skid went into a rut he didn't see and began to roll. Before he could recover, the aircraft rolled over on to its side enough to where the main rotor made contact and the aircraft continued on its side with full power going to the rotors.

As the FAA filed it

THE PILOT STATED HAD WAS HOVERING AND LOOKING FOR A PLACE TO SET DOWN. HE THEN SAW A PLACE HE THOUGHT WAS SUITABLE AND LANDED. HE STATED AS HE LANDED THE SKID WENT INTO A RUT HE DIDN'T SEE AND BEGAN TO ROLL. BEFORE HE COULD RECOVER, THE AIRCRAFT ROLLED OVER ON TO ITS SIDE ENOUGH TO WHERE THE MAIN ROTOR MADE CONTACT AND THE AIRCRAFT CONTINUED ON ITS SIDE WITH FULL POWER GOING TO THE ROTORS.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.