OpenAirDocs.org

20220613020499I

Incident · Minor damage
Open the Markdown

FAA incident report · Cessna 421B · Burnsville, NC · June 13, 2022

FAA Aviation Safety Information Portal

© OpenStreetMap
Date
June 13, 2022 · 12:30 local
Place
Burnsville, NC
Phase of flight
Takeoff: Departure Roll
Operating rules
General operating rules (Part 91)
Damage
Minor damage
Aircraft
N780JC
Reported as
Cessna 421B
Reported engine
Continental GTSIO-520-C
People aboard
1
Fatal injuries
0
Other injuries
0
N780JCRegistered now · Cessna 421BS/N 421B0582 · Built 1974Airframe modelCessna 421BEngine modelContinental GTSIO-520-CReciprocating

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

On Monday June 13, 2022, at approximately 1230 EST, privacy data omitted, a Cessna 421B, departed the runway during departure roll from mountain air airport (2NC0) in Burnsville, NC. No injuries were reported. Damage was limited to the aircraft only. The aircraft is registered to privacy data omitted. And was piloted byprivacy data omitted the aircraft was being operated under part 91 with no passengers on board.

privacy data omitted Attempts to depart from runway 14 at mountain air airport for elizabethton TN. As the aircraft begins to roll down the runway, it veers abruptly to the right. The PIC retarded the throttles, applied left rudder, and brakes. The aircraft continued to roll into the grass along the right side of the runway striking boulders and rocks before coming to rest when it came into contact with the embankment. The estimated total distance before the aircraft came to rest was 150 yards. The aircraft was subsequently relocated to the 2NC0 ramp.

All sas activities linked to task id # T-EA68-FY22-1285

As the FAA filed it

ON MONDAY JUNE 13, 2022, AT APPROXIMATELY 1230 EST, ^PRIVACY DATA OMITTED^, A CESSNA 421B, DEPARTED THE RUNWAY DURING DEPARTURE ROLL FROM MOUNTAIN AIR AIRPORT (2NC0) IN BURNSVILLE, NC. NO INJURIES WERE REPORTED. DAMAGE WAS LIMITED TO THE AIRCRAFT ONLY. THE AIRCRAFT IS REGISTERED TO ^PRIVACY DATA OMITTED^. AND WAS PILOTED BY^PRIVACY DATA OMITTED^ THE AIRCRAFT WAS BEING OPERATED UNDER PART 91 WITH NO PASSENGERS ON BOARD.

^PRIVACY DATA OMITTED^ ATTEMPTS TO DEPART FROM RUNWAY 14 AT MOUNTAIN AIR AIRPORT FOR ELIZABETHTON TN. AS THE AIRCRAFT BEGINS TO ROLL DOWN THE RUNWAY, IT VEERS ABRUPTLY TO THE RIGHT. THE PIC RETARDED THE THROTTLES, APPLIED LEFT RUDDER, AND BRAKES. THE AIRCRAFT CONTINUED TO ROLL INTO THE GRASS ALONG THE RIGHT SIDE OF THE RUNWAY STRIKING BOULDERS AND ROCKS BEFORE COMING TO REST WHEN IT CAME INTO CONTACT WITH THE EMBANKMENT. THE ESTIMATED TOTAL DISTANCE BEFORE THE AIRCRAFT CAME TO REST WAS 150 YARDS. THE AIRCRAFT WAS SUBSEQUENTLY RELOCATED TO THE 2NC0 RAMP.

ALL SAS ACTIVITIES LINKED TO TASK ID # T-EA68-FY22-1285