Aircraft model · Rotorcraft · Rotorcraft · registry code 8680825

Manufacturer (registry)
AEROSPATIALE
Model
AS 355F2
Registry code
8680825
Registered
6 aircraft
Type
Rotorcraft
Engines
2 · Turbo-shaft
Seats
7
Weight class
12,500 to 19,999 lb
Certification
Type certificated
Data sheet
TCDSH11EU
Holder
Airbus Helicopters

Model codes come from the FAA registry’s reference file. ADs are matched to them by model name and maker.

On this page

Aircraft by year built · 15

1981Registered nowDeregistered2026
Aircraft by the year they were built: 15 aircraft
19812
19821
19841
19871
19883
19892
19902
19911
19971
20091

Airworthiness directives that may apply · 78

ADs whose products match this airframe model. Each AD’s applicability may narrow it by serial number, part number or configuration.

1985In forceSuperseded2026
ADs by the year they took effect: 109 ADs
19851
19871
19881
19891
19903
19951
19961
19983
19991
20004
20013
20025
20037
20044
20051
20061
20082
20105
20111
20121
20138
20144
20153
20161
20171
20183
20206
202115
20225
20233
20242
20253
20268
See all 110 ADs
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
  FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
  WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_directive.parquet' WHERE aircraft_model_code IN ('8680825'))
  ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Information bulletins that may apply · 3

Query with SQL
duckdb -csv -c "SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
  FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
  WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_saib.parquet' WHERE aircraft_model_code IN ('8680825'))
  GROUP BY s.saib_number ORDER BY issue_date DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Registered aircraft · 6

Query with SQL
duckdb -csv -c "SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
  FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
  WHERE aircraft_model_code IN ('8680825')
  ORDER BY n_number"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

NTSB investigations · 3

Aircraft matched to this model through the registry, by N-number and event date, checked against the reported serial number, make and model.

Defining event, 2008 on

Of 2 cases NTSB coded with a defining event. All defining events

In the probable cause, 2008 on

Findings NTSB made part of the probable cause. A case can have several. All findings

First occurrence, 1982 to 2007

Of 1 case with NTSB’s older coding, defined in its coding manual.

Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
  FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
  WHERE a.aircraft_model_code IN ('8680825')
  ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

FAA incident reports · 5

Matched to this model through the registry, by N-number and event date, checked against the reported make and model.

Accident 20201114019419AAerospatiale AS 355F2 · Hammonton, NJPilot stated that he performed pre-takeoff flight control checks by memory, and all responses were normal. As the helicopter was lifting off to a hover, the tail rotor control pedals were stuck. The helicopter started moving sideways off of the dolly. The…Nov 14, 2020 · N712CA · Substantial damageAccident 20181030021189AAerospatiale AS 355F2 · Beekmantown, NYOn 10/30/2018 at approximately 1630 N372CA an Aerospatiale AS355F2 operator while performing powerline inspection/repair operations with four persons on board contacted powerlines resulting in main rotorblade contact with utility pole. The aircraft became…Oct 30, 2018 · N372CA · Destroyed · 2 fatalIncident 20121002024199IAerospatiale AS 355F2 · Lumberton, NJMaintenance had been performed prior to the flight on the left engine (remove, inspect, clean & reinstall the magnetic chip detector plugs). The mechanic stated he closed and secured the left engine cowling after he completed the maintenance task. The pilot…Oct 2, 2012 · N808FX · Substantial damageIncident 20101209054339IAerospatial AS 355F2 · East Windsor, NJAircraft suffered bird strike (2 geese) at 1200' feet AGL, heading 060, over East Windsor, new jersey. Damage was found to be isolated to forward nose section of the fuselage and to the left horizontal stabilizer.Dec 9, 2010 · N808FX · Minor damageAccident 19890414011619AAerosp AS355F2 · Las Vegas, NVPractice pickup to hover from cement building site pad. Tail rotor hit concrete rebar doing considerable damage.Apr 14, 1989 · N225CC · Substantial damage
Query with SQL
duckdb -csv -c "SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
  FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
  WHERE aircraft_model_code IN ('8680825')
  ORDER BY event_date DESC, report_number DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Service difficulty reports · 69

See all 69 difficulty reports
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy
  FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet'
  WHERE aircraft_model_key = 'AS355F2'
  ORDER BY difficulty_date DESC"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

STCs that may be installed · 297

Approved for this model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.

See all 297 STCs
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
  FROM (
    SELECT stc_number, min(matched_model) AS matched_model
    FROM 'https://openairdocs.org/data/latest/faa_aircraft_model_stc.parquet'
    WHERE aircraft_model_code IN ('8680825')
    GROUP BY stc_number
  ) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
  ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

The same model under other registry codes

Amateur-built copies and renamed makers get their own codes.

Query with SQL
duckdb -csv -c "SELECT m.code, m.manufacturer, m.model, count(g.n_number) AS aircraft
  FROM 'https://openairdocs.org/data/latest/faa_aircraft_model.parquet' m LEFT JOIN 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet' g ON g.aircraft_model_code = m.code
  WHERE m.match_key = 'AS355F2' AND m.code NOT IN ('8680825')
  GROUP BY ALL
  ORDER BY aircraft DESC
  LIMIT 12"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.