NTSB investigations, TX
37 cases where NTSB found Flight control system.
Cases per year
| 2008 | 2 |
|---|---|
| 2009 | 2 |
| 2010 | 2 |
| 2011 | 1 |
| 2013 | 2 |
| 2015 | 2 |
| 2016 | 4 |
| 2018 | 6 |
| 2019 | 1 |
| 2020 | 2 |
| 2021 | 4 |
| 2023 | 4 |
| 2024 | 3 |
| 2026 | 2 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'TX' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010227'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'TX' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010227')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN26LA088Accident · No injuriesClass 4 · LimitedFinal reportAeronca 7AC · Early, TXThe unsecured cup holder that restricted left rudder pedal movement, which resulted in a loss of directional control during landing roll.NTSB CEN26LA092Accident · Minor injuriesClass 4 · LimitedFinal reportCessna 172 · San Marcos, TXThe flight instructor’s failure to properly configure the elevator trim for the takeoff, that resulted in a hard landing. Contributing to the accident was the flight instructor’s failure to follow the before takeoff checklist.NTSB CEN25LA043Accident · No injuriesClass 3 · LimitedFinal reportPitts S1E · Seguin, TXThe improper construction of the rudder cable assembly by the airplane builder, which resulted in the fatigue failure of the left rudder cable during the landing roll and the pilot’s subsequent inability to maintain directional control.NTSB CEN24LA178Accident · No injuriesClass 4 · LimitedFinal reportCessna 172M · Midland, TXThe pilot’s failure to maintain airplane control during a go-around in a gusting crosswind, which resulted in an aerodynamic stall and collision with terrain. Contributing to the accident was the pilot’s lack of system knowledge regarding the operation of the…NTSB CEN24FA164Accident · 1 fatalClass 3 · FieldFinal reportLancair Legacy FG · Spicewood, TXThe pilot’s failure to properly configure the airplane during a go-around in gusting wind conditions, and his subsequent exceedance of the airplane’s critical angle of attack, which resulted in an aerodynamic stall at an altitude too low for recovery.NTSB CEN23LA424Accident · Serious injuriesClass 3 · LimitedFinal reportPowrachute Pegasus · Caddo Mills, TXThe pilot’s inadequate rolling preflight, which resulted in a loss of directional control in flight and subsequent collision with an object during landing.NTSB WPR23LA205Accident · No injuriesClass 4 · LimitedFinal reportPiaggio Aero Industries P180 · Sugar Land, TXThe pilot’s failure to complete required preflight checklist items and properly configure the flaps for takeoff.NTSB CEN23LA172Accident · Serious injuriesClass 3 · LimitedFinal reportPiper PA-34-200 · Coldspring, TXThe stabilator trim rod assembly separated from the stabilator link assembly due to a missing connecting bolt, which resulted in the pilot’s inability to maintain pitch control of the airplane.NTSB CEN23LA170Accident · No injuriesClass 3 · LimitedFinal reportLuscombe 8F · Palmer, TXThe installation of an unapproved rudder control cable, which resulted in a fatigue failure and subsequent loss of rudder control during cruise flight. Contributing to the accident was the mechanic’s inadequate inspection of the rudder control system.NTSB DCA22MA009Accident · Serious injuriesClass 2 · MajorFinal reportMcdonnell Douglas DC-9-87 (MD-87) · Brookshire, TXThe jammed condition of both elevators, which resulted from exposure to localized, dynamic high wind while the airplane was parked and prevented the airplane from rotating during the takeoff roll. Also causal was the failure of Everts Air Cargo, the pilots’…NTSB CEN21LA363Accident · No injuriesClass 3 · LimitedFinal reportRotary RAF2000 · Anahuac, TXThe pilot’s incorrect trim system installation, which resulted in a loss of gyroplane control and impact with terrain.NTSB CEN21LA346Accident · Serious injuriesClass 3 · LimitedFinal reportHpH, Spol. S.R.O. Glasflügel 304S · Briggs, TXThe overstress fracture of the elevator control tube due to reduced wall thickness from water intrusion and subsequent corrosion. Contributing to the accident was the lack of a drain hole at the bottom of the elevator control tube, which allowed the tube to…NTSB CEN21LA326Accident · Serious injuriesClass 3 · LimitedFinal reportGary James Lail Zenith CH 750 Cruzer · Blossom, TXThe improper swaging of the rudder control cable, which disconnected during flight and resulted in the loss of control.NTSB CEN21LA033Accident · No injuriesClass 3 · LimitedFinal reportAmerican Champion 7ECA · Longview, TXThe improper installation of a clevis pin in the rudder system which led to a loss of directional control during landing.NTSB CEN20LA259Accident · Minor injuriesClass 3 · LimitedFinal reportSopwith Type 9400 · Van Alstyne, TXAn inflight loss of aileron control due to movement of a control connector.NTSB CEN19LA133Accident · No injuriesClass 3 · LimitedFinal reportCirrus SR20 · Mineral Wells, TXThe in-flight separation of the right aileron when the inboard hinge bolt disengaged from its nut plate due to excessively twisted safety wire, which resulted in a torsional overstress fracture that caused the inboard hinge bolt to become unsecured.NTSB GAA19CA011Accident · Minor injuriesData collectionFinal reportBeech 55 · San Antonio, TXThe pilot's improper takeoff trim setting and failure to properly secure his seatbelt, which resulted in a loss of airplane control. Contributing to the accident was the pilot's failure to follow the Before Takeoff checklist.NTSB CEN18LA344Accident · Serious injuriesClass 3 · LimitedFinal reportCessna 172 · Addison, TXThe pilot's improper flap setting for takeoff and subsequent exceedance of the airplane’s critical angle of attack, which resulted in an aerodynamic stall. Contributing was the overgross state of the airplane.NTSB CEN18LA195Accident · Minor injuriesClass 3 · LimitedFinal reportCirrus Design SR20 · Katy, TXThe loss of airplane control on takeoff due to the absence of the attachment bolt for the left aileron actuation arm.NTSB GAA18CA300Accident · No injuriesData collectionFinal reportCessna 150 · Killeen, TXThe pilot’s failure to maintain adequate airspeed and his exceedance of the airplane’s critical angle of attack during a maximum performance takeoff, which resulted in an aerodynamic stall. Also causal was the pilot’s failure to use the appropriate flap…NTSB CEN18LA157Accident · Minor injuriesLimited investigationFinal reportHartline J Bon Hartline Kitfox III · Marathon, TXThe failure of the flaperon hinge attachment point during takeoff, which resulted in a loss of airplane control. Contributing to the accident was the lack of reinforcement of the hinge attachment point in accordance with the manufacturer’s service bulletin.NTSB GAA18CA129Accident · Minor injuriesData collectionFinal reportRobinson Helicopter R22 · Wadsworth, TXThe passenger’s gun becoming lodged in the flight controls during takeoff and his failure to remove it, which resulted in impact with terrain.NTSB CEN16CA359Accident · No injuriesData collectionFinal reportBeech 58 · Wichita Falls, TXThe incorrect maintenance of the airplane's ventilation system which resulted in an obstruction of the elevator control system.NTSB CEN16LA259Accident · No injuriesLimited investigationFinal reportCessna 152 · Bridgeport, TXThe pilot's unstabilized approach and uneven braking due to insufficient runway remaining, which resulted in a loss of directional control during landing. Contributing to the accident was the bound flap jackscrew, which jammed the flaps and led to the pilot’s…NTSB DCA16FA199Accident · 2 fatalClass 2 · FieldFinal reportBell 525 · Italy, TXA severe vibration of the helicopter that led to the crew's inability to maintain sufficient rotor rotation speed (Nr), leading to excessive main rotor blade flapping, subsequent main rotor blade contact with the tail boom, and the resultant in-flight…NTSB CEN16IA103Incident · No injuriesIncident investigationFinal reportCessna 560 · Dallas, TXThe loss of aileron trim due to the lack of separation between the cannon head on the back of autopilot cannon plug and the aileron trim tab control gear. Contributing to the incident was the lack of guidance in the airplane maintenance manual to verify…NTSB CEN15LA395Accident · No injuriesLimited investigationFinal reportBell Helicopter Textron Canada 429 · Port O'Connor, TXThe fatigue failure of the tail rotor pitch change link spherical bearing housing as a result of corrosion pitting.NTSB CEN15LA182Accident · Serious injuriesLimited investigationFinal reportAir Tractor AT 400 · Levelland, TXThe in-flight separation of the left aileron's attachment hardware at the connection between the long aileron pushrod and the left aileron bellcrank. Contributing to the accident was maintenance personnel’s improper installation of, or failure to install, the…NTSB CEN13LA518Accident · Minor injuriesLimited investigationFinal reportAmerican Champion 7GCB · Pearsall, TXThe failure of the rudder cable due to electrical arcing damage from contact with an unguarded battery and the pilot's subsequent loss of control during the go-around.NTSB CEN13CA302Accident · Serious injuriesData collectionFinal reportJans Robert Falcon XP · Diboll, TXThe pilot did not properly secure a sand bag in the airplane's rear seat causing its flight controls to become jammed and resulting in the airplane's inability to avoid a collision with power lines.NTSB CEN11LA558Accident · No injuriesLimited investigationFinal reportPiper Aerostar 601P · Alpine, TXThe pilot’s improper flare which resulted in a hard landing. Contributing to the accident was the pilot’s improper decision to fly the airplane with a known mechanical deficiency.NTSB CEN10IA453Incident · No injuriesIncident investigationFinal reportPiper PA-32R-301T · Mount Pleasant, TXThe failure of an aileron control cable due to a seized idler pulley bearing.NTSB CEN10CA262Accident · No injuriesData collectionFinal reportAir Tractor AT-301 · D'Hanis, TXThe pilot's failure to properly set the airplane's flaps prior to takeoff.NTSB CEN10LA052Accident · No injuriesLimited investigationFinal reportPiper PA-34-200T · Saginaw, TXThe pilot's inability to maintain control of the airplane due to a pinched trim system wire that resulted in a runaway nose-down pitch trim.NTSB CEN09IA578Incident · No injuriesIncident investigationFinal reportCessna 421 · Sugar Land, TXThe improper installation of the pitch trim cable which resulted in it making improper contact with a guard pin that led to the fatigue failure of the cable.NTSB CEN09IA032Incident · No injuriesIncident investigationFinal reportMD Helicopter MD 900 · Amherst, TXThe failure of the vertical stabilizer control adapter due to reverse bending fatigue.NTSB CEN09IA003Incident · No injuriesIncident investigationFinal reportMD Helicopter MD 900 · Weatherford, TXThe failure of the vertical stabilizer control adapter due to reverse bending fatigue.