NTSB investigations, 2015
19 cases where NTSB found Flight control system.
Cases per year
| 2008 | 32 |
|---|---|
| 2009 | 25 |
| 2010 | 36 |
| 2011 | 28 |
| 2012 | 31 |
| 2013 | 29 |
| 2014 | 25 |
| 2015 | 19 |
| 2016 | 22 |
| 2017 | 31 |
| 2018 | 23 |
| 2019 | 23 |
| 2020 | 22 |
| 2021 | 26 |
| 2022 | 21 |
| 2023 | 23 |
| 2024 | 27 |
| 2025 | 15 |
| 2026 | 4 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE year(c.\"eventDate\") = 2015
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010227'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE year(c."eventDate") = 2015 AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010227')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB ERA16FA043Accident · 2 fatalField investigationFinal reportBeech A36TC · Orlando, FLThe pilot's failure to maintain adequate airspeed while turning to join the final approach leg of the airport traffic pattern with full airplane-nose-up trim, which resulted in the airplane exceeding its critical angle of attack and experiencing an…NTSB ERA16LA030Accident · No injuriesLimited investigationFinal reportHughes 369D · Marion, SCA momentary jam in the tail rotor control system from an undetermined source, resulting in a torsional fracture of the tail rotor control torque tube and a loss of helicopter control.NTSB GAA15CA294Accident · No injuriesData collectionFinal reportHoward DGA 15P · Englewood, COThe separation of the elevator control system linkage at a push/pull tube and cable joint, for an unknown reason, because the bolt and associated hardware securing the joint was not found for examination.NTSB CEN15FA425Accident · 1 fatalField investigationFinal reportCessna T310Q · Wichita, KSThe separation of the attachment hardware connecting the elevator trim tab pushrod to the elevator trim actuator, which resulted in the elevator trim tab jamming in a position outside the limits of normal travel and a subsequent loss of airplane control.NTSB ERA15LA360Accident · No injuriesLimited investigationFinal reportJ. Schilling S-19 · East Falmouth, MAThe experimental airplane builder's failure to properly secure the stabilator trim tab push-pull tube’s connection, which resulted in the tube’s separation and a subsequent hard landing. Contributing to the accident was the pilot/owner's failure to detect the…NTSB CEN15LA395Accident · No injuriesLimited investigationFinal reportBell Helicopter Textron Canada 429 · Port O'Connor, TXThe fatigue failure of the tail rotor pitch change link spherical bearing housing as a result of corrosion pitting.NTSB CEN15LA367Accident · 1 fatalLimited investigationFinal reportAir Tractor AT-802A · Wiville, ARThe pilot's failure to maintain clearance from a utility pole while maneuvering during an agricultural application flight, which resulted in damage to the right aileron and a subsequent uncontrolled right roll at a low altitude.NTSB ANC15CA053Accident · No injuriesData collectionFinal reportCessna U206F · Kasilof, AKThe pilot's selection of unsuitable terrain for takeoff, which resulted in a jammed elevator and subsequent loss of control and collision with terrain.NTSB CEN15LA323Accident · No injuriesLimited investigationFinal reportCessna 182B · Fults, ILThe malfunction of the flap assembly, which resulted in a restriction of aileron control. Contributing to the accident was maintenance personnel’s inadequate inspection of a corroded flap control cable.NTSB GAA15CA177Accident · Minor injuriesData collectionFinal reportCentrair 101A · Hartford, WIThe glider pilot's failure to connect the elevator to the elevator control rod during the assembly process, resulting in a loss of control, and a collision with terrain during takeoff.NTSB CEN15FA289Accident · 1 fatalField investigationFinal reportCessna 172P · Bartlett, ILThe pilot’s loss of airplane control for reasons that could not be determined because an examination of the airplane did not reveal any preimpact abnormalities.NTSB ERA15LA237Accident · Serious injuriesLimited investigationFinal reportPiper PA28 · Hampton, NHThe pilot’s failure to properly set the stabilator trim prior to takeoff, which resulted in an exceedance of the airplane’s critical angle of attack and an aerodynamic stall during takeoff.NTSB GAA15CA088Accident · Minor injuriesData collectionFinal reportCessna 172M · Sussex, NJThe pilot's failure to remove the gust lock during the preflight inspection, resulting in a loss of control and collision with trees during takeoff.NTSB ERA15FA203Accident · 1 fatalField investigationFinal reportCessna 172 · Penn Yan, NYThe student pilot's failure to maintain airplane control during the initial climb. Contributing to the accident was the student's inappropriate configuration of the airplane's wing flaps for the initial climb.NTSB CEN15IA200Incident · No injuriesIncident investigationFinal reportAir Tractor AT 402A · Brickeys, ARThe in-flight separation of the attachment hardware at the elevator control pushrod due to maintenance personnel's improper reinstallation of the attachment hardware.NTSB CEN15LA182Accident · Serious injuriesLimited investigationFinal reportAir Tractor AT 400 · Levelland, TXThe in-flight separation of the left aileron's attachment hardware at the connection between the long aileron pushrod and the left aileron bellcrank. Contributing to the accident was maintenance personnel’s improper installation of, or failure to install, the…NTSB WPR15LA126Accident · No injuriesLimited investigationFinal reportPiper PA 18-150 · Merced, CAThe separation of the flight control stick from the stub due to its improper installation.NTSB CEN15CA166Accident · No injuriesData collectionFinal reportFunk B85C · Leonard, OKThe improper installation of the UP elevator cable turnbuckle which became disconnected during the flight.NTSB ERA15FA109Accident · 2 fatalField investigationFinal reportPiper PA-23 · Lakeland, FLAn in-flight loss of control for reasons that could not be determined during postaccident investigation; the loss of control likely occurred during a simulated loss of power in the right engine during an instructional flight.