NTSB investigations, 2016
7 cases where NTSB found Fuselage.
Cases per year
| 1979 | 1 |
|---|---|
| 2008 | 8 |
| 2009 | 16 |
| 2010 | 12 |
| 2011 | 11 |
| 2012 | 4 |
| 2013 | 8 |
| 2014 | 3 |
| 2015 | 5 |
| 2016 | 7 |
| 2017 | 5 |
| 2018 | 8 |
| 2019 | 8 |
| 2020 | 5 |
| 2021 | 4 |
| 2022 | 2 |
| 2023 | 6 |
| 2024 | 5 |
| 2025 | 4 |
| 2026 | 3 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE year(c.\"eventDate\") = 2016
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010353'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE year(c."eventDate") = 2016 AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010353')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB DCA16FA217Accident · No injuriesField investigationFinal reportBoeing 737-700 · Pensacola, FLA low-cycle fatigue crack in the dovetail of fan blade No. 23, which resulted in the fan blade separating in flight and impacting the fan case. This impact caused the fan blade to fracture into fragments that traveled farther than expected into the inlet,…NTSB GAA16CA419Accident · No injuriesData collectionFinal reportCessna 172 · Lewiston, MTThe pilot's failure to ensure that his seat was adjusted and locked, which resulted in his seat sliding aft during the takeoff roll, and the subsequent loss of directional control and runway excursion.NTSB GAA16CA374Accident · Minor injuriesData collectionFinal reportCessna 150 · Cleveland, GAFailure of the left main landing gear attachment during the landing roll, which resulted in a left landing gear collapse, and damage to the left wing and aileron.NTSB WPR16LA139Accident · No injuriesLimited investigationFinal reportCessna 140 · Salinas, CAThe fatigue failure of a bulkhead-skin joint that supported the main landing gear leg, which resulted in the collapse of the left main landing gear. Contributing to the failure were the non-original structural configuration of the 60-year-old airplane and the…NTSB ERA16LA265Accident · No injuriesLimited investigationFinal reportEurocopter Deutschland MBB BK 117 C-2 · Pittsburgh, PAMaintenance personnel’s failure to properly secure the left vertical fin cowling during recent maintenance, which resulted in its separation and subsequent contact with the tail rotor system during flight.NTSB ERA16FA141Accident · 1 fatalField investigationFinal reportCessna 172N · Charleston, WVThe flight instructor's failure to ensure that her seat was properly secured before initiating the takeoff, which resulted in a subsequent loss of control. Contributing was the lack of an installed secondary seat stop.NTSB DCA16LA096Accident · No injuriesLimited investigationFinal reportLockheed 382G · Iliamna, AKThe fatigue failure of the forward pressure bulkhead canted web that originated from stress corrosion cracking areas. Contributing to the failure were inspection procedures and intervals inadequate to identify the crack.