NTSB investigations, 2012
3 cases where NTSB found Rotorcraft flight control.
Cases per year
| 2008 | 13 |
|---|---|
| 2009 | 2 |
| 2010 | 1 |
| 2011 | 3 |
| 2012 | 3 |
| 2013 | 1 |
| 2014 | 1 |
| 2015 | 9 |
| 2016 | 5 |
| 2017 | 4 |
| 2018 | 2 |
| 2019 | 2 |
| 2020 | 2 |
| 2021 | 1 |
| 2022 | 3 |
| 2023 | 2 |
| 2024 | 2 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE year(c.\"eventDate\") = 2012
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010467'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE year(c."eventDate") = 2012 AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010467')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN13CA027Accident · No injuriesData collectionFinal reportAerospatiale SA315B · Helena, OKThe pilot's failure to properly secure the cyclic and to stop the main rotor system before exiting the helicopter, which resulted in the main rotor blades striking the tail rotor driveshaft.NTSB ERA12FA563Accident · 1 fatalField investigationFinal reportAerospatiale AS 355F1 · West Windsor, NJDisconnection of the upper rod end from the fore/aft servo due to severely worn threads, which resulted in a loss of control and separation of a main rotor blade during cruise flight. Contributing to the accident were incorrect maintenance procedures and…NTSB WPR12LA219Accident · No injuriesLimited investigationFinal reportEnstrom F28 · Twin Falls, IDThe pilot's inability to maintain helicopter control during cruise flight due to the failure of the No. 2 main rotor Lamiflex bearing. Contributing to the accident was the pilot's decision to operate the helicopter with a known deficiency and the helicopter’s…