NTSB investigations, LA
17 cases where NTSB found Maintenance.
Cases per year
| 2009 | 1 |
|---|---|
| 2010 | 1 |
| 2011 | 1 |
| 2013 | 3 |
| 2014 | 2 |
| 2015 | 1 |
| 2016 | 1 |
| 2017 | 3 |
| 2018 | 1 |
| 2019 | 1 |
| 2022 | 1 |
| 2025 | 1 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'LA' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '020620'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'LA' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '020620')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN25LA402Accident · No injuriesClass 4 · LimitedFinal reportTextron 525C · Baton Rouge, LAThe improper installation of the trunnion pin, which resulted in a failure of the right main landing gear. Contributing to the accident was the failure of maintenance personnel to follow the aircraft manufacturer’s maintenance procedures.NTSB CEN22LA202Accident · No injuriesClass 3 · LimitedFinal reportCessna 421C · Monroe, LAThe failure of the maintenance personnel to properly reinstall the elevator trim tab hardware, which resulted in an in-flight separation of the elevator.NTSB CEN19LA132Accident · Serious injuriesClass 3 · LimitedFinal reportPiper PA28R · Prairieville, LAInstallation of an incorrect engine oil drain valve, which resulted in damage to the valve during landing gear retraction and subsequent engine failure due to oil starvation. Contributing to the accident was the failure of maintenance personnel to comply with…NTSB CEN18LA285Accident · No injuriesLimited investigationFinal reportSmith AEROSTAR601 · Baton Rouge, LAThe loss of right engine power due to fuel starvation, which resulted from corrosion debris in the fuel lines. Contributing to the accident was the mechanic’s and pilot’s inadequate maintenance of the airplane before the flight.NTSB CEN17LA328Accident · No injuriesLimited investigationFinal reportBeech A36 · Gonzales, LAA partial loss of engine power due to inadequate maintenance, including worn spark plugs and a leaking fuel hose fitting.NTSB CEN17LA228Accident · Serious injuriesLimited investigationFinal reportThompson Angel Hawk II · Homer, LAA total loss of engine power due to the engine’s unresolved high operating temperatures, which resulted in failure of the distributor rotor and drive shaft, and the pilot’s failure to maintain airspeed during the subsequent forced landing, which resulted in…NTSB CEN17LA174Accident · No injuriesLimited investigationFinal reportBell 407 · Venice, LAAn in-flight separation of the tip block from the tail rotor blade due to an inadequate blade repair, which resulted in a rotor imbalance sufficient to crack the gearbox attachment studs and gearbox support assembly, and inadequate postrepair test procedures,…NTSB CEN16LA154Accident · 1 fatalClass 3 · LimitedFinal reportAir Tractor AT 502 · Kilbourne, LAThe failure of the operator to comply with the terminating action of the airworthiness directive, which resulted in the subsequent failure and separation of the vertical stabilizer due to fatigue.NTSB CEN16LA033Accident · Serious injuriesLimited investigationFinal reportCessna 120 · Gonzales, LAMaintenance personnel’s improper installation of the carburetor during recent maintenance, including the omission of a required cotter pin, which resulted in a total loss of engine power.NTSB CEN14LA449Accident · No injuriesLimited investigationFinal reportPiper PA 28-161 · New Orleans, LAThe in-flight fatigue failure of the crankshaft gear retaining bolt, which resulted in a total loss of engine power. Contributing to the accident were the pilot/owner’s failure to maintain the airplane in accordance with an airworthiness directive following a…NTSB CEN14FA435Accident · 1 fatalField investigationFinal reportCessna 172N · Natchitoches, LAThe partial loss of engine power due to the exhaust valve rocker retaining stud backing out of the cylinder head, which resulted in the exhaust valve being stuck in the closed position. Contributing to the accident was the pilot’s failure to configure the…NTSB CEN14LA081Accident · No injuriesLimited investigationFinal reportRockwell International 112 · Hammond, LAThe total loss of engine power due to oil starvation because of a fractured governor oil line, which resulted from the improper installation of the governor oil line assembly during the last oil line replacement.NTSB CEN14LA048Accident · Minor injuriesLimited investigationFinal reportEurocopter Deutschland EC135P1 · Shreveport, LAThe mechanic's improper installation of the antitorque pedals, which resulted in an in-flight loss of helicopter control.NTSB CEN13LA321Accident · No injuriesLimited investigationFinal reportBell 206-L4 · Abbeville, LAFailure of maintenance personnel to ensure adequate torque of a tailrotor drive shaft coupling bolt, which resulted in the partial disconnection of the drive shaft.NTSB CEN11IA615Incident · No injuriesIncident investigationFinal reportBombardier CL-600-2B19 · Baton Rouge, LAThe improperly installed upper attachment bolt in the left main landing gear uplock assembly, which led to the failure of the left main landing gear to extend before landing. Contributing to the accident was maintenance personnel's lack of training on the…NTSB CEN10IA397Incident · No injuriesIncident investigationFinal reportBell 206 · Gulf of Mexico, LAImproper reassembly of the collective flight controls by maintenance personnel. Contributing to the incident were inadequate postmaintenance examinations by maintenance personnel and inadequate preflight inspections by two pilots.NTSB CEN09LA571Accident · Minor injuriesLimited investigationFinal reportMesserschmitt-Boelkow-Blohm BO-105S · Thibodaux, LAThe pilot's inability to maintain control due to the mechanic's inadvertent switching of two cyclic control tubes of different lengths during maintenance.