Fatal NTSB investigations
9 cases where NTSB found Manufacture/production.
Cases per year
| 2008 | 1 |
|---|---|
| 2009 | 2 |
| 2010 | 1 |
| 2015 | 1 |
| 2016 | 1 |
| 2022 | 1 |
| 2023 | 1 |
| 2024 | 1 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"highestInjuryLevel\" = 'Fatal'
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '040130'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."highestInjuryLevel" = 'Fatal' AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '040130')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN24FA218Accident · 1 fatalClass 3 · FieldFinal reportCessna 172 · Gainesville, TXThe fuel pump manufacturer’s improper torquing of screws on the engine-driven fuel pump, which resulted in a disruption in the fuel system and a loss of engine power on initial climb.NTSB WPR24FA053Accident · 1 fatalClass 3 · FieldFinal reportBeauchamp Norm Kitfox · Eloy, AZThe separation of a propeller blade during the initial climb due to insufficient blade retention forces. Contributing to the accident was the propeller blade retention design, manufacturing defects that prevented the propeller from achieving adequate grip…NTSB DCA22MA193Accident · 10 fatalClass 1 · MajorFinal reportDehavilland DHC-3 · Freeland, WAThe in-flight unthreading of the clamp nut from the horizontal stabilizer trim actuator barrel due to a missing lock ring, which resulted in the horizontal stabilizer moving to an extreme trailing-edge-down position rendering the airplane’s pitch…NTSB ANC17FA009Accident · 1 fatalClass 3 · FieldFinal reportBellanca 7GCBC · Fairbanks, AKThe pilot’s decision to operate the airplane at an altitude too low to allow for recovery from an intentional aerodynamic stall. Contributing to the accident was the pilot’s lack of knowledge of the stall performance characteristics of the airplane modified…NTSB CEN15FA126Accident · 2 fatalField investigationFinal reportEnstrom 280FX · Erie, COAn in-flight failure of the helicopter's #2 main rotor spindle due to undetected fatigue cracking, which resulted in an in-flight breakup. Contributing to failure were the nonconforming thread root radius of the spindle and the manufacturer's failure to…NTSB ERA10FA409Accident · 1 fatalField investigationFinal reportPiper PA-32R-301 · Washington, GAThe manufacturer's inadequate quality control and improper manufacture of the fuel servo diaphragm assembly, which resulted in fatigue cracking of the hub stud and subsequent loss of engine power due to fuel starvation.NTSB WPR09LA253Accident · 2 fatalLimited investigationFinal reportGauchat Safari · Rock Springs, AZThe separation of the main rotor head during cruise flight as a result of cyclic fatigue of the main rotor head spindle. The fatigue crack was due to an inadequate manufacturing process.NTSB WPR09FA234Accident · 2 fatalField investigationFinal reportUpton Bakeng Duce · Ramona, CAAn in-flight separation of the right wing, which resulted from the pilot's performance of a maneuver that produced aerodynamic loads that exceeded the wing spar’s degraded strength. The wing spar strength degradation was due to the builder's failure to comply…NTSB CHI08FA269Accident · 3 fatalField investigationFinal reportBell 206L-1 · Greensburg, INThe in-flight separation of a main rotor blade due to a fatigue failure of the blade spar, rendering the helicopter uncontrollable, and the manufacturer's production of main rotor blades with latent manufacturing defects, which precipitated the fatigue…