NTSB investigations, TX
5 cases where NTSB found Manufacture/production.
Cases per year
| 2008 | 1 |
|---|---|
| 2019 | 1 |
| 2024 | 2 |
| 2025 | 1 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'TX' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '040130'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE c."eventStateOrRegion" = 'TX' AND c."eventCountry" = 'USA' AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '040130')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN25LA117Accident · No injuriesClass 3 · LimitedFinal reportVans RV-7A · Plainview, TXThe improper machining of the propeller blade bearing seat, which resulted in an inflight propeller blade fatigue failure. Contributing to the accident was the improper machining of the propeller hub and propeller blade root and machining surface quality…NTSB CEN25LA043Accident · No injuriesClass 3 · LimitedFinal reportPitts S1E · Seguin, TXThe improper construction of the rudder cable assembly by the airplane builder, which resulted in the fatigue failure of the left rudder cable during the landing roll and the pilot’s subsequent inability to maintain directional control.NTSB CEN24FA218Accident · 1 fatalClass 3 · FieldFinal reportCessna 172 · Gainesville, TXThe fuel pump manufacturer’s improper torquing of screws on the engine-driven fuel pump, which resulted in a disruption in the fuel system and a loss of engine power on initial climb.NTSB CEN19LA159Accident · No injuriesClass 3 · LimitedFinal reportLancair LC41 · Cleburne, TXA total loss of engine power due to oil starvation as the result of the oil pressure switch failure due to a manufacturing defect.NTSB DEN08FA140Accident · Serious injuriesField investigationFinal reportAircraft Mfg & Dev. CH601XLi · Farmersville, TXThe inadvertent tail stall and subsequent loss of airplane control as a result of the open canopy. Contributing to the accident was the inadequate emergency procedures provided by the airplane manufacturer and the inadequate design of the canopy latching…