NTSB investigations: Schweizer 269C, CO
6 cases on aircraft the registry lists as Schweizer 269C. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 2002 | 1 |
|---|---|
| 2004 | 1 |
| 2005 | 1 |
| 2010 | 1 |
| 2012 | 1 |
| 2024 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'CO' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('8059502'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'CO' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('8059502'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN25LA003Accident · Minor injuriesClass 3 · LimitedFinal reportSchweizer 269C · Montrose, COA loss of engine power during a demonstrated autorotation due to an improperly adjusted air-fuel mixture or idle setting. Contributing to the accident was the pilot’s failure to perform the required idle check during previous flights in higher elevation areas.NTSB CEN12LA343Accident · No injuriesLimited investigationFinal reportSchweizer 269C · Denver, COThe inadequately overhauled landing gear dampers that allowed initiation of a ground resonance event from which the pilot was unable to recover. Contributing to the accident was the overhaul facility's failure to identify the overcharged dampers and a lack of…NTSB CEN10CA183Accident · Minor injuriesData collectionFinal reportSchweizer 269C · Idledale, COThe flight instructor's delayed remedial actions to regain rotor rpm, resulting in a rapid descent and hard landing.NTSB DEN05CA079Accident · No injuriesData collectionFinal reportSchweizer 269C · Pueblo, COthe student pilot's failure to maintain control of the helicopter during the landing. Contributing to the accident was the flight instructor's inadequate supervision of the student pilot.NTSB DEN04CA092Accident · No injuriesData collectionFinal reportSchweizer 269C · Englewood, COthe settling with power situation encountered by the pilot. Contributing to the accident was the high density altitude.NTSB DEN02LA098Accident · No injuriesLimited investigationFinal reportSchweizer 269C · Broomfield, COmaintenance personnel's failure to secure the landing skid oleo strut bolt during the last 50-hour inspection, causing the left rear skid to collapse and the tail rotor to strike the ground.