What was found
UPON INSPECTION OF REPAIRED PART PRIOR TO INSTALLATION, DISCOVERED THE LANDING GEAR CONTROL WAS WIRED INCORRECTLY. PART HAD BEEN REPAIRED BY REPAIR STATION PRZR073K. ANOTHER CONTROL REMOVED FROM SUPPLY WAS ALSO WIRED INCORRECTLY.
- Difficulty date
- September 9, 1996
- Submitted
- March 26, 2000
- Operation
- General aviation
- Aircraft
- N2MIL
- Make and model
- Beech A200
- Aircraft serial
- BJ24
- System (JASC)
- 3234 · Landing Gear Selector
- Part
- Gear Control
- Part number
- A4503M95
- Condition
- Miswired
- Location
- Mlg
- Stage of operation
- IN
- Nature of condition
- W
- Precautionary procedure
- K
As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.