Service difficulty report · Angle · Cndair CL6002C10

Difficulty date
July 14, 2013
Submitted
July 31, 2013
Operation
Air carrier
Aircraft
N722EV
Make and model
Cndair CL6002C10
Aircraft serial
10127
Aircraft time
24,343 hours, 16,905 cycles
Part
Angle
Condition
Corroded
Location
Pax Door Sill
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

PAX DOOR LOWER SILL PROXIMITY SENSOR ANGLE HAS CORROSION ON SEVERAL PLACES. REMOVED ANGLE IAW SRM 51-41-02-001-001-A01. LOCATED, DRILLED & DEBURRED HOLES IN NEW SILL ANGLE ALSO ATTACHED NUT PLATES IAW SRM 51-40-06-001-001-A01, 51-40-11-001-001-A01, 51-42-06-001-001-A01, 51-45-00-001-001-A01 DWG SH670-31825, REV A. INSTALLED CAP ANGLE MID STA 330 WITH NEW SERVICEABLE PART IAW SRM 51-42-06-001-001-A01 & 51-42-21-001-001-A01. THIS REPAIR IS CLASSIFIED AS A MAJOR REPAIR IAW ASA SOP 5702.