As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.
What was found
(CAN) CORROSION FOUND ON THE NR 1 MLG AXLE. CMM 32-11-03 PAGE 605 STATES IN PART ON NON-WEAR SURFACES THE DEFECTS TO BE POLISHED OUT, MUST NOT EXCEED 0.005 INCHES & FOR WEAR SURFACES DEFECTS MUST NOT EXCEED 0.0005 INCHES. INSPECTION REVEALED PITTING ON NON-WEAR SURFACE & MEASUREMENTS TAKEN WITH OPTICAL MICROMETER SPECIFIED DEEPEST PIT AT .022.