As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.
What was found
NR 6 LED FAILED TO RETRECT. NR 6 SLAT EXTEND LIGHT ON SO'S PANEL REMAINS ON AT ALL FLAP POSITIONS. WITH THE NR 6 SLAT CONNECTOR PLUG DISCONNECTED THE EXTEND LIGHT WILL EXTINGUISH. WITH THE JUMPER WIRE INSTALLED THE RETRACT REMAINS ON AT ALL FLAP SETTINGS AGAIN. REPLACED THE NR 6 L/E SLAT EXTEND SWITCH IAW MM 27-82-011-4-0. OPS CHECK GOOD. OK TO CONTINUE. (CLOSED)