What was found
DURING THE ACCOMPLISHMENT OF THE A.D., A SMALL CRACK WAS FOUND IN THE LEFT VERTICAL TO HORIZONTAL STABILIZER FAIRING ANGLE. THE CRACK WAS LOCATED IN THE APPROXIMATE CENTER OF THE ANGLE AND ALONG THE UPPER SECTION (HORIZONTAL STABILIZER SIDE) OF THE BEND RADIUS. THE CRACK WAS APPROXIMATELY ONE INCH LONG AND WAS INITIALLY NOTED AS A FINE BLACK LINE. THE AREA WAS CLEANED AND DYE PENETRANT INSPECTION WAS PERFORMED TO CONFIRM THE CRACK. THE ANGLE WAS REPLACED WITH A NEW PART. THE ANGLE WAS REPLACED USING A NEW PART. REPLACEMENT PN 101-620030-1U.