As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.
What was found
PILOT EXPERIENCED A FLAP FAILURE ON APPROACH FOR LANDING. THE FLAPS WOULD NOT EXTEND PAST 0 DEGREES AND THE FLAP MOTOR CIRCUIT BREAKER WAS TRIPPED. THE PILOT LANDED WITHOUT FURTHER INCIDENT. TROUBLESHOOTING DISCLOSED THAT THE MOTOR HAD A BURNED ELECTRICAL SMELL. ADDITIONALLY, THE FLAP PCB BOARD WAS SHORTED. THE FLAP DRIVE MOTOR AND PCB BOARD WAS REPLACED. SUBSEQUENT OPERATIONAL CHECKS WERE SATISFACTORY.