Service difficulty report · Stiffener · Boeing 737*

Difficulty date
October 11, 2021
Submitted
November 15, 2021
Operation
Air carrier
Aircraft
N788SA
Make and model
Boeing 737*
Aircraft serial
30603
Aircraft time
68,361 hours, 40,407 cycles
Part
Stiffener
Part number
148A24885
Condition
Corroded
Location
Fuselage
Stage of operation
IN
How discovered
9
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

CORROSION ON B.S. 1088; R.B.L. 27; W.L. 252. APU INLET CUT OUT UPPER FLANGE. ; / [01] REMOVED CORROSION ON APU INLET CUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 : AREA 2' X 1' X .020' IAW SRM 51-10-02-0G-0. FOUND TO BE OUT OF LIMITS DUE TO NO ALLOWABLE DAMAGE IN SRM; IT'LL BE REAPIRABLE BY REPLACEMENT IAW SRM 51-10-02-0G-0 STEP 9.C.; [02] REMOVED APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-02.; [03] VERIFIED CORRECTIVE ACTION STEPS 1 AND 2.; [04] LOCATED AND DRILLED NEW APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-05 ; OK TO INSTALL; [05] VERIFIED CORRECTIVE ACTION 4; [06] INSTALLED NEW APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-02 AND DWG # 148A0924; [07] PART USAGE INFO; [08] VERIFIED INSTALLED NEW APU INLET CUT OUT UPPER STIFFENER P/N 148A2488-5 AT BS 1088; RBL 27; WL 252 IAW SRM 51-40-02 AND DWG # 148A0924