What was found
RT HORIZONTAL STAB AT RIB 120.3; #3 STIFFENER IS CRACKED AT THE LOWER END RT STAB L/E @ STAB STA 120.3. / [01] REMOVED RIGHT HAND HORIZONTAL STABILIZER INSPAR RIB AT STAB STA 120.30 TO ACCESS RIB REPAIRS IAW SRM 51-40-02-0G-0.;[02] APPLICABLE REPAIR FOR THIS CRACKED HORIZONTAL STAB RIB AT STAB STA 120.30 #3 STIFFENER LOWER END IS SRM 55-10-09-2R-4.;[03] CUT AND REMOVED CRACK DAMAGE FROM THE 3RD VERTICAL STIFFENER LOWER END IAW SRM 55-10-09-2R-4 STEP 4.B(1). DIMENSIONS L=1.85' X W 0.050'.;[04] VERIFIED CORRECTIVE ACTION 3.;[05] REQUESTED HFEC INSPECTION OF CUT EDGES OF STIFFENER AND WEB AND ALL HOLES WITHIN REPAIR AREA FOR CRACKS IAW SRM 55-10-09-2R-4 STEP 4.C & D.;[06] ACCOMPLISHED HFEC INSPECTION OF WEB; CUTOUT EDGE AND ALL HOLES IN REPAIR AREA NO CRACK NOTED IAW 737 NDTM PART 6; 51-00-00 PROCEDURE 23 AND 16 TOOL# IS000450; MINI-MITE ATS2407;[07] ACCOMPLISHED A GVI INSPECTION OF ALL AREAS WITHIN REPAIR FOR CORROSION; EXISTING REPAIRS OR ANY OTHER DEFECTS; NO DISCREPANCIES FOUND IAW SRM 55-10-09-2R-4 STEP 4.E.;[08] FABRICATED REPAIR PARTS; T-SECTION 7075-T76511 0.063' THICK LOT# 1463618-1; ANGLE BAC1490-7075-T62 0.063' THICK LOT# 1464923-1 AND SHIM 2(EA) 7075-T6 0.016' THICK LOT# 1439717-1 IAW SRM 55-10-09-2R-4 STEP 4.F - J.13] INSTALLED REPAIR PARTS AND APPLIED FILLET SEAL TO REPAIR PARTS IAW SRM 55-10-09-2R-4 STEP 4.M - Q.;[17] INSTALLED RIGHT HAND HORIZONTAL STABILIZER INSPAR RIB AT STAB STA 120.30 IAW SRM 51-40-02-0G-0 AND BAC DRAWINGS # 002A0001; 182A3001 AND 182A1500.