Service difficulty report · Hinge Fitting · Cndair CL6002D24

Difficulty date
September 12, 2025
Submitted
December 26, 2025
Operation
Air carrier
Aircraft
N820SK
Make and model
Cndair CL6002D24
Aircraft serial
15108
Aircraft time
38,726 hours, 24,998 cycles
Part
Hinge Fitting
Condition
Gouged
Location
Zone 200
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

THE PAX DOOR PIANO HINGE ON THE DOOR SIDE LAST LUG AROUND SPRING PIN HOLE IS GOUGED. COMPLIED WITH RECEIVED REO 670-52-11-511 REV.-E. TYPE I: DISPOSITION FOR OUTER OF LUGS (GOUGE, CHAFING). BLEND PERFORMED USING A TAPER RATIO 5:1. LUG WALL THICKNESS IS STILL 0.100", A. WALL THICKNESS IS NOT LOWER THAN 0.100", B. I. BLEND DEPTH IS GREATER THAN 0.020" (ACTUAL DEPTH IS MEASURED AT 0.024"), NDT REPORTED NO CRACKS FOUND AT WORK AREA, STEP #4- RESTORED FINISH TO WORKED HINGE PIN LUG. WORK WAS WITHIN LIMITS REF REO 670-52-11-511 REV.-E. COMPLIED WITH 51-900-1002-SKY