Service difficulty report · Beam · Cndair CL6002C10

Difficulty date
October 17, 2007
Submitted
October 19, 2007
Operation
Air carrier
Aircraft
N722EV
Make and model
Cndair CL6002C10
Aircraft serial
10127
Aircraft time
10,351 hours, 6,789 cycles
Part
Beam
Condition
Corroded
Location
Fuselage
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

SURFACE CORROSION ON 280 TRANSVERSE BEAM ON UPPER SURFACE. 10-24-07 REMOVED SURFACE CORROSION ON 280 TRANSVERSE BEAM ON UPPER SURFACE IAW SRM 51-21-06. RT OUT OF LIMITS. REMOVE RT 280 FRAME & RBL 19 AND 27 INTERCOSTAL IAW CRJ 700 SRM 51-42-06 AND 51-42-21. REMOVED RT PITOT STATIC LINE IAW CRJ 700 AMM 34-11-00. CUT NEW 280 FRAME & DRILLED FASTNER HOLES LABELS DONE IAW IS67053110026. INSTALLED RT 280 FRAME IAW IS67053110026 & 280 FRAME SPLICE IAW REO 670-53-11-047. INSTALLED FASTENERS IN ITANIUM DOUBLERS PER MODSUM IS67053110026 CONTINUE INSTALLATION OF FASTENERS THROUGH UPPER PORTION OF TITANIUM. FINISHED INSTALLATION OF RT SIDE OF 280 TRANSVERSE BEAM PER IS67053110026 AND REO 670-53-11-045.