What was found
REMOVED THE BACKING PLATE FROM THE ACTUATOR TO ADJUST JACK SCREW. UNTHREADED THE OTBD JACK SCREW, PUSHING OUT THE SPLIT BEARINGS. UNTHREADED THE INBD JACK SCREW, BUT FOUND THE SPLIT BEARINGS WERE SEIZED/CORRODED INTO THE ACTUATOR HOUSING. PUMPED GREASE INTO THE INBD JACKSCREW HOUSING AND NOTED THE SPLIT BEARINGS WERE PUSHED OUT APPROXIMATELY 0625" BEFORE SEIZING AGAIN. ATTEMPTED TO CONTINUE UNTHREADING THE JACK SCREW IN AN EFFORT TO DRIVE THE SPLIT BEARINGS OUT, BUT FOUND THIS TO BE INEFFECTIVE. CONTINUED PUMPING GREASE INTO THE ACTUATOR AND SIMULTANEOUSLY UNTHREADING THE JACK SCREW UNTIL THE SPLIT BEARINGS RELEASED FROM THE ACTUATOR HOUSING.