Copy · BD500-282021_001 · 80 pages

© Airbus Canada Limited Partnership. Filed by the FAA in regulations.gov docket FAA-2025-5024, the docket of AD 2026-10-12. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '724cac2e754402c62453b8f9737e4c40f31ade83231198732c043a1f878a868d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

BD500-282021

PART A - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left Wing - Accomplishment instruction BD500-282021 Issue No. 001.00 Copyright © Airbus Canada Limited Partnership All rights reserved. No part of this work may be reproduced or copied in any form or by any means without written permission of Airbus Canada Limited Partnership.

The Airbus and A220 logos are registered trademarks of Airbus Canada Limited Partnership.

The information, technical data and the designs disclosed herein are the exclusive property of Airbus Canada Limited Partnership or contain proprietary rights of others and are not to be used or disclosed to others without the written consent of Airbus Canada Limited Partnership. The recipient of this document, by its retention and use, agrees to hold in confidence the technical data and designs contained herein. The foregoing shall not apply to persons having proprietary rights to such information, technical data or such designs to the extent that such rights exist.

Publication No.:

Manufacturer:

Airbus Canada Limited Partnership Customer Services 13100 Henri-Fabre Blvd.

Mirabel, Quebec J7H 3C6 Page 1 2025/01/27

Intentionally left blank 2025/01/27

BD500-282021 Fuel - Distribution - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left and Right Wings - Service Bulletin References Table 1 References Data Module/Technical Publication Title BD500-A-J28-20-21-01AAA-933A-A PART A - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left Wing - Accomplishment instruction BD500-A-J28-20-21-01AAA-934A-A Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left and Right Wings - Material information BD500-A-J28-20-21-02AAA-933A-A PART B - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Right Wing - Accomplishment instruction Service Bulletin Common information THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED AIRCRAFT, SEND THE SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR

HAS SOLD AIRCRAFT OR TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND

THIS SERVICE BULLETIN TO THE NEW OWNER, UNLESS CONFIRMATION WAS

RECEIVED THAT AIRBUS HAS INCLUDED THE NEW OPERATOR ON THE DISTRIBUTION LIST.

Management information Compliance category: Recommended (Service bulletin recommended to be accomplished to prevent significant operational disruptions) Task category: Inspection and repair Original issue date: 2025-01-27 Impact list Impact (Maintenance publications):

Refer to the Documentation affected section of the Planning Information section.

Accomplishment limits Time compliance: Basic limit Remarks:

Refer to the Compliance section of the Planning Information section.

Replacement service bulletin None See applicability on the first page of the DM BD500-A-J28-20-21-00AAA-930A-A (001) BD500-A-J28-20-21-00AAA-930A-A (001) 2025-01-27 Page 3

BD500-282021 Revision information Initial issue Summary Applicability BD-500-1A10, Aircraft 50010 thru 50018 and 50020 thru 50069 BD-500-1A11, Aircraft 55003 thru 55016, 55018 thru 55240, and 55242 thru 55253 Reason It is possible that damage can occur to the motive flow fuel-feed tubes at the bonded saddle clamp locations. The damage to the motive flow fuel-feed tubes can cause fuel imbalance and feed ejector issues.

Description This service bulletin is divided into two parts: PART A and PART B.

PART A - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left Wing The aircraft is put in standard configuration for maintenance. The Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112 is done on the left wing.

PART B - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Right Wing The aircraft is put in standard configuration for maintenance. The Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112 is done on the right wing.

Concurrent requirements None Manpower It will take an estimated 1.00 h to complete PART A of this service bulletin.

Note This estimate does not include the man-hours necessary to do Spirit AeroSystems Service Bulletin 500SHW-28-2112.

It will take an estimated 1.00 h to complete PART B of this service bulletin.

Note This estimate does not include the man-hours necessary to do Spirit AeroSystems Service Bulletin 500SHW-28-2112.

Material information BD500-A-J28-20-21-01AAA-934A-A See applicability on the first page of the DM BD500-A-J28-20-21-00AAA-930A-A (001) BD500-A-J28-20-21-00AAA-930A-A (001) 2025-01-27 Page 4

BD500-282021 Planning information Applicability Aircraft affected:

AIRCRAFT MODEL SERVICE AIRCRAFT SERIAL NUMBER

PRODUCTION AIRCRAFT

SERIAL NUMBERS BD-500-1A10 50010 thru 50018 and 50020 thru 50069 50070 and subsequent serial numbers 1 BD-500-1A11 55003 thru 55016, 55018 thru 55240, 55242 thru 55253 55241, 55254 and subsequent serial numbers 1 1 Aircraft will have an equivalent modification incorporated before delivery.

Note The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Airbus Service Bulletins.

Before you do this service bulletin, examine all Supplemental Type Certificates (STCs), Supplemental Type Approvals (STAs), or equivalent action changes to make sure that you can complete this service bulletin.

Reason Problem and effect It is possible that damage can occur to the motive flow fuel-feed tubes at the bonded saddle clamp locations. The damage to the motive flow fuel-feed tubes can cause fuel imbalance and feed ejector issues.

Objective/Solution This service bulletin gives the instruction to do Spirit Aerosystems Belfast Service Bulletin 500SHW-28-2112 to inspect the motive flow fuel-feed tubes and replace the saddle clamp.

Description This service bulletin is divided into two parts: PART A and PART B.

PART A - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left Wing The aircraft is put in standard configuration for maintenance. The Spirit Aerosystems Belfast Service Bulletin 500SHW-28-2112 is done on the left wing.

PART B - Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Right Wing The aircraft is put in standard configuration for maintenance. The Spirit Aerosystems Belfast Service Bulletin 500SHW-28-2112 is done on the right wing.

Compliance Recommended Service Bulletin See applicability on the first page of the DM BD500-A-J28-20-21-00AAA-930A-A (001) BD500-A-J28-20-21-00AAA-930A-A (001) 2025-01-27 Page 5

BD500-282021 Airbus recommends that PART A and PART B of this service bulletin be done at no more than 9800 flight hours from the release date of this service bulletin, unless otherwise directed by the airworthiness authority of the operator.

Note If it is not possible to complete all the instructions in this service bulletin because of the configuration of the aircraft, speak with a CRC representative at 1 866 A220 CRC (1-866-222-0272) or 1-450-476-7676 or e-mail at a220crc@airbus.com for analysis and to get an approved disposition to complete this service bulletin.

Note This service bulletin does not affect Airworthiness Limitations Items (ALIs) or Damage Tolerance Inspections (DTIs).

Concurrent requirements None Approval The technical content of this service bulletin has been approved under the authority of the TCCA Design Approval Organization No: DAO #19-Q-02.

Manpower The man-hours given below are estimates for direct labor done by an experienced crew on an aircraft prepared for maintenance.

These estimates do not include the time necessary for:

‐ Administrative functions such as planning, liaising, familiarization, and report writing.

‐ Non-productive elapsed time such as rest time, having meals, and crew shift changes.

‐ Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.

‐ Preparation for modification (unless specified in the Accomplishment Instructions) such as cleaning and getting parts, tools, consumables, and ground equipment.

‐ Quality assurance inspections, troubleshooting and/or correction of discrepancies found when a task is done.

‐ All other activities that are not considered by Airbus as directly related to the accomplishment of this procedure.

It will take an estimated 1.00 h to complete PART A of this service bulletin. The man-hours are divided as shown in the table that follows:

TASK MAN-HOURS Job Set-Up 0.50 h Procedure 0.00 h Test 0.00 h Job Close-Up 0.50 h See applicability on the first page of the DM BD500-A-J28-20-21-00AAA-930A-A (001) BD500-A-J28-20-21-00AAA-930A-A (001) 2025-01-27 Page 6

BD500-282021 Note These estimates do not include the man-hours necessary to do Spirit AeroSystems Service Bulletin 500SHW-28-2112.

It will take an estimated 1.00 h to complete PART B of this service bulletin. The man-hours are divided as shown in the table that follows:

TASK MAN-HOURS Job Set-Up 0.50 h Procedure 0.00 h Test 0.00 h Job Close-Up 0.50 h Note These estimates do not include the man-hours necessary to do Spirit AeroSystems Service Bulletin 500SHW-28-2112.

Weight and balance Not changed Electrical load data Not changed Referenced documentation Refer to the SB Introduction document BD500-000000 for definition or explanation of service bulletin content.

For Airbus reference only: Restriction and/or Special Instruction (RSI) C-500-000-28-0045, Revision B Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112, dated July 24, 2024 For Airbus reference only: PCR 62754 Documentation affected 1 Maintenance Publications Illustrated Parts Data Publication (IPDP) 2 Operational Publications None Industry support information This service bulletin is part of an AIRBUS monitored retrofit campaign. For detailed information, please refer to Retrofit Information Letter (RIL) S28M24000735. To organize this retrofit, please contact AIRBUS retrofit management department at: a220monitored.retrofit@airbus.com.

See applicability on the first page of the DM BD500-A-J28-20-21-00AAA-930A-A (001) BD500-A-J28-20-21-00AAA-930A-A (001) 2025-01-27 Page 7

BD500-282021 Material information BD500-A-J28-20-21-01AAA-934A-A Accomplishment instructions PART A BD500-A-J28-20-21-01AAA-933A-A PART B BD500-A-J28-20-21-02AAA-933A-A Additional information None See applicability on the first page of the DM BD500-A-J28-20-21-00AAA-930A-A (001) BD500-A-J28-20-21-00AAA-930A-A (001) End of data module 2025-01-27 Page 8

BD500-282021 Replacement of the Saddle Clamp of the Motive Flow Tube at Rib 5 of the Left and Right Wings - Material information References Table 1 References Data Module/Technical Publication Title None Service Bulletin Material set list None Support equipment list There is no support equipment for this service bulletin.

Supplies list For a list of supplies, refer to the different tasks and the Spirit AeroSystems Belfast Service Bulletin that are given as references in this service bulletin.

Spares list The spare sets in the table that follows are available from Satair:

Note Spare set BD500282021K350 and BD500282021K351 are required. One set of each per aircraft.

Spare set BD500282021K352 and BD500282021K353 are only required if the fuel tubes are damaged and need to be replaced. One set of each per aircraft.

For PART A Spare set: Kit BD500282021K350 Name: Kit, Fuel System, Motive Flow, Left Wing Part number [Mfg. code] Name Quantity Remarks 500SHW282112K1 [K4585] KIT, Wing Spare Set, Left Side 1 [1] Procurement information:

Price information: $352.00 Availability: 226 days (calendar days from receipt of order)

NOTE(S) The sales terms (costs and availability) are estimated in relation to economic conditions.

The latest valid price and lead time for ordering purposes shall be obtained thru See applicability on the first page of the DM BD500-A-J28-20-21-01AAA-934A-A (001) BD500-A-J28-20-21-01AAA-934A-A (001) 2025-01-27 Page 9

BD500-282021 Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:

spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.

For PART B Spare set: Kit BD500282021K351 Name: Kit, Fuel System, Motive Flow, Right Wing Part number [Mfg. code] Name Quantity Remarks 500SHW282112K2 [K4585] KIT, Wing Spare Set, Right Side 1 [1] Procurement information:

Price information: $352.00 Availability: 226 days (calendar days from receipt of order)

NOTE(S) The sales terms (costs and availability) are estimated in relation to economic conditions.

The latest valid price and lead time for ordering purposes shall be obtained thru Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:

spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.

For PART A Spare set: Kit BD500282021K352 Name: Kit, Fuel System, Motive Flow, Left Wing Part number [Mfg. code] Name Quantity Remarks 500SHW282109K1 [K4585] Kit, Fuel System, Motive Flow, Left Wing 1 [1] Procurement information:

Price information: $2560.00 Availability: 276 days (calendar days from receipt of order)

NOTE(S) The sales terms (costs and availability) are estimated in relation to economic conditions.

The latest valid price and lead time for ordering purposes shall be obtained thru Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:

spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.

For PART B See applicability on the first page of the DM BD500-A-J28-20-21-01AAA-934A-A (001) BD500-A-J28-20-21-01AAA-934A-A (001) 2025-01-27 Page 10

BD500-282021 Spare set: Kit BD500282021K353 Name: Kit, Fuel System, Motive Flow, Right Wing Part number [Mfg. code] Name Quantity Remarks 500SHW282109K2 [K4585] KIT, Wing Spare Set, Right Side 1 [1] Procurement information:

Price information: $2570.00 Availability: 276 days (calendar days from receipt of order)

NOTE(S) The sales terms (costs and availability) are estimated in relation to economic conditions.

The latest valid price and lead time for ordering purposes shall be obtained thru Satair Customer Order Specialist: Americas: spares.americas@satair.com, Asia:

spares.aspac@satair.com Europe and Africa: spares.emea@satair.com.

Procurement address:

Name: For customers based in the Americas Business unit:

Business unit name: Satair USA, Inc 525 Westpark Drive, Suite 400 Peachtree City, GA 30269 United States of America Ph.: 1 404 675 6333 Please contact your Customer Order Specialist https:/www.satair.com/market/search CPHSB7X Name: For customers based in Europe, Middle East, Africa Business unit:

Business unit name: Satair A/S Amager Landevej 147A 2770 Kastrup Denmark Ph.: 45 3247 0100 Please contact your Customer Order Specialist https:/www.satair.com/market/search CPHSB7X Name: For customers based in the Asia Pacific (excluding mainland China) Business unit:

Business unit name: Satair Pte Ltd 12 Seletar Aerospace Link Singapore 797553 The Republic of Singapore Ph.: 65 6543 0977 Please contact your Customer Order Specialist https:/www.satair.com/market/search CPHSB7X Name: For customers based in mainland China Business unit:

See applicability on the first page of the DM BD500-A-J28-20-21-01AAA-934A-A (001) BD500-A-J28-20-21-01AAA-934A-A (001) 2025-01-27 Page 11

BD500-282021 Business unit name: Satair (Beijing) Co. Ltd Tian Zhu Lu 8, Tianzhu Airport Industrial Zone Beijing 101312 People’s Republic of China Ph.: 86 10 8048 6161 Please contact your Customer Order Specialist https:/www.satair.com/market/search CPHSB7X 1 1: Footnote remarks.

Spare set BD500282021K350 includes Spirit AeroSystems Belfast Service Bulletin spare set 500SHW282112K1 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.

Spare set BD500282021K351 includes Spirit AeroSystems Belfast Service Bulletin spares set 500SHW282112K2 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.

Spare set BD500282021K352 includes Spirit AeroSystems Belfast Service Bulletin spares set 500SHW282109K1 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.

Spare set BD500282021K353 includes Spirit AeroSystems Belfast Service Bulletin spares set 500SHW282109K2 that is necessary to do Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.

For a list of the contents of the spare sets, refer to Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112.

Removed spares list For a list of removed spares, refer to the Spirit AeroSystems Belfast Service Bulletin 500SHW-28-2112 that is given as reference in this service bulletin.

See applicability on the first page of the DM BD500-A-J28-20-21-01AAA-934A-A (001) BD500-A-J28-20-21-01AAA-934A-A (001) End of data module 2025-01-27 Page 12

Pages 13–24 of 80