Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '77d5b2fd0d5dec28b109c1b18c7b7eeba39374e324984f5ad63f3527b413fcff' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '77d5b2fd0d5dec28b109c1b18c7b7eeba39374e324984f5ad63f3527b413fcff' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
BD500-538005
2020-07-08 Page 1
Service Bulletin Fuselage - Aerodynamic Fairings - Inspection of the Support Structure of the WTBF BD500-538005 Issue No. 001 Copyright © 2020 Airbus Canada Limited Partnership All rights reserved. No part of this work may be reproduced or copied in any form or by any means without written permission of Airbus Canada Limited Partnership.
The Airbus and A220 logos are registered trademarks of Airbus Canada Limited Partnership.
The information, technical data and the designs disclosed herein are the exclusive property of Airbus Canada Limited Partnership or contain proprietary rights of others and are not to be used or disclosed to others without the written consent of Airbus Canada Limited Partnership. The recipient of this document, by its retention and use, agrees to hold in confidence the technical data and designs contained herein. The foregoing shall not apply to persons having proprietary rights to such information, technical data or such designs to the extent that such rights exist.
Manufacturer:
Airbus Canada Limited Partnership Customer Services 13100 Henri-Fabre Blvd., Mirabel, Quebec Canada J7N 3C6
BD500-538005
Intentionally left blank
2020-07-08 Page 2
BD500-538005
2020-07-08 Page 1 Table of contents The listed documents are included in Issue 001, dated 2020-07-08, of this publication.
Document title Data module code Issue date Applicable to Fuselage - Aerodynamic Fairings - Inspection of the Support Structure of the WTBF - Service Bulletin BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 50010-54999, 55003-59999 PART A: Inspection of the Support Structure of the WTBF - Accomplishment instruction BD500-A-J53-80-05-01AAA-933A-A 2020-07-08 50010-54999, 55003-59999 PART B: Adjusting of the WTBF Tie Rods
- Accomplishment instruction BD500-A-J53-80-05-02AAA-933A-A 2020-07-08 50010-54999, 55003-59999
BD500-538005
Intentionally left blank
2020-07-08 Page 2
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 1 Fuselage - Aerodynamic Fairings - Inspection of the Support Structure of the WTBF - Service Bulletin
Applicability: 50010-54999, 55003-59999
Table of contents Page Fuselage - Aerodynamic Fairings - Inspection of the Support Structure of the WTBF -
Service Bulletin1
References1
Service Bulletin1
Common information1
1 Maintenance Publications6
2 Operational Publications6
List of tables Page
1 References1
References Table 1 References Data Module/Technical Publication Title BD500-A-J53-80-05-01AAA-933A-A PART A: Inspection of the Support Structure of the WTBF - Accomplishment instruction BD500-A-J53-80-05-02AAA-933A-A PART B: Adjusting of the WTBF Tie Rods - Accomplishment instruction Service Bulletin Common information THIS SERVICE BULLETIN IS SENT TO EACH OPERATOR. IF THE OPERATOR HAS LEASED AIRCRAFT, SEND THE SERVICE BULLETIN TO THE LESSEE. IF THE OPERATOR
HAS SOLD AIRCRAFT OR TRANSFERRED SPARES IN THE LAST SIX MONTHS, SEND
THIS SERVICE BULLETIN TO THE NEW OWNER, UNLESS CONFIRMATION WAS
RECEIVED THAT AIRBUS HAS INCLUDED THE NEW OPERATOR ON THE DISTRIBUTION LIST.
Management information Compliance category: Recommended (Service bulletin recommended to be accomplished to prevent significant operational disruptions) Task category: Inspection Original issue date: 2020-07-08 Impact list None
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 2 Accomplishment limits Time compliance: Basic limit Remarks:
Refer to the Compliance section of the Planning Information section.
Replacement service bulletin None Revision information Initial issue Summary Applicability BD-500-1A10, Aircraft 50010 thru 54999 BD-500-1A11, Aircraft 55003 thru 59999 Reason It is possible for the frames and longerons of the support structure of the Wing To Body Fairing (WTBF) to have cracks.
Description This service bulletin is divided into two parts: PART A and PART B.
PART A The aircraft is put in standard configuration for maintenance. Access doors are opened. If necessary, access panels are removed. Between FS931.0 and FS1015.0, at RBL40.0 and LBL40.0, an inspection of longerons of the support structure of the WTBF is done. At FS973.0, an inspection of the frames of the support structure of the WTBF and of tie rods are done. If removed, the access panels are installed. The access doors are closed.
PART B The aircraft is put in standard configuration for maintenance. Access doors are opened. If necessary, access panels are removed. Two tie rods are disconnected. The tie rods are adjusted and connected. If removed, the access panels are installed. The access doors are closed.
Concurrent requirements None Manpower It will take an estimated 8.0 h to complete PART A and PART B of this service bulletin.
Material information For a list of consumables, refer to the different tasks that are given as references in this service bulletin.
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 3 Planning information Applicability Aircraft affected:
AIRCRAFT MODEL SERVICE AIRCRAFT SERIAL NUMBER
PRODUCTION AIRCRAFT
SERIAL NUMBERS BD-500-1A10 50010 thru 54999 There is no production effectivity.
BD-500-1A11 55003 thru 59999 There is no production effectivity.
Note The instructions in this service bulletin are only applicable to the systems and parts installed at the time of delivery of the aircraft or as changed by Airbus Service Bulletins.
Before you do this service bulletin, examine all Supplemental Type Certificates (STCs), Supplemental Type Approvals (STAs), or equivalent action changes to make sure that you can complete this service bulletin.
Reason Problem and effect It is possible for the frames and longerons of the support structure of the Wing To Body Fairing (WTBF) to have cracks. This can cause extended ground time to repair the support structure of the WTBF.
Objective/Solution This service bulletin gives the procedure to inspect the support structure of the WTBF and adjust the load on two tie rods. This will make sure that frames and longerons do not have cracks.
Description This service bulletin is divided into two parts: PART A and PART B.
PART A The aircraft is put in standard configuration for maintenance. Access doors are opened. If necessary, access panels are removed. Between FS931.0 and FS1015.0, at RBL40.0 and LBL40.0, an inspection of longerons of the support structure of the WTBF is done. At FS973.0, an inspection of the frames of the support structure of the WTBF and of tie rods are done. If removed, the access panels are installed. The access doors are closed.
PART B The aircraft is put in standard configuration for maintenance. Access doors are opened. If necessary, access panels are removed. Two tie rods are disconnected. The tie rods are adjusted and connected. If removed, the access panels are installed. The access doors are closed.
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 4 Compliance Applicability: 50010-50019, 55003-55046 Recommended Service Bulletin For aircraft that have less than 4000 flight hours, Airbus recommends that PART A and PART B of this service bulletin be done at or before the aircraft has 4850 flight hours, unless otherwise directed by the airworthiness authority of the operator.
For aircraft that have 4000 flight hours or more, Airbus recommends that PART A and PART B of this service bulletin be done within 850 flight hours from the release date of the initial issue of this service bulletin, unless otherwise directed by the airworthiness authority of the operator.
Airbus recommends that PART A of this service bulletin be repeated at an interval of 850 flight hours from the initial inspection.
Applicability: 50020-54999, 55047-59999 Recommended Service Bulletin For aircraft that have less than 1200 flight hours, Airbus recommends that PART A and PART B of this service bulletin be done within 850 flight hours from the release date of the initial issue of this service bulletin, unless otherwise directed by the airworthiness authority of the operator.
For aircraft that have 1200 flight hours or more, Airbus recommends that PART A and PART B of this service bulletin be done within 500 flight hours from the release date of the initial issue of this service bulletin, unless otherwise directed by the airworthiness authority of the operator.
Airbus recommends that PART A of this service bulletin be repeated at an interval of 500 flight hours from the initial inspection.
Note If it is not possible to complete all the instructions in this service bulletin because of the configuration of the aircraft, speak with a CRC representative at 1-866-A220-CRC (1-866-222-0272) or 1-450-476-7676 or e-mail at A220_crc@abc.airbus for analysis and to get an approved disposition to complete this service bulletin.
Note This service bulletin does not affect Airworthiness Limitations Items (ALIs) or Damage Tolerance Inspections (DTIs).
Concurrent requirements None Approval The technical content of this service bulletin has been approved under the authority of the TC- CA Design Approval Organization No: DAO #19-Q-02.
Manpower The man-hours given below are estimates for direct labor done by an experienced crew on an aircraft prepared for maintenance.
These estimates do not include the time necessary for:
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 5
- Administrative functions such as planning, liaising, familiarization, and report writing.
- Non-productive elapsed time such as rest time, having meals, and crew shift changes.
- Elapsed time such as for paint to dry, sealant to cure, and fuel tank venting.
- Preparation for modification (unless specified in the Accomplishment Instructions) such as cleaning and getting parts, tools, consumables, and ground equipment.
- Quality assurance inspections, troubleshooting and/or correction of discrepancies found when a task is done.
- All other activities that are not considered by Airbus as directly related to the accomplishment of this procedure.
PART A It will take an estimated 2.5 h to complete this service bulletin. The man-hours are divided as shown in the table that follows:
TASK MAN-HOURS Job Set-Up 0.5 h Procedure 1.5 h Test 0 h Job Close-Up 0.5 h PART B It will take an estimated 6.5 h to complete this service bulletin. The man-hours are divided as shown in the table that follows:
TASK MAN-HOURS Job Set-Up 2.0 h Procedure 2.5 h Test 0 h Job Close-Up 2.0 h Weight and balance Not changed Electrical load data Not changed Referenced documentation Refer to the SB Introduction document BD500-000000 for definition or explanation of service bulletin content.
For Airbus Canada reference only: Restriction and/or Special Instruction (RSI) C-500-000-53-0073, Revision B
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 6 For Airbus Canada reference only: Restriction and/or Special Instruction (RSI) C-500-000-53-0074, Revision B For Airbus Canada reference only: PCR 59378 Documentation affected 1 Maintenance Publications Aircraft Maintenance Publication (AMP) 2 Operational Publications None Industry support information For on-site labor assistance, please speak with a speak with a CRC representative at 1-866- A220-CRC (1-866-222-0272) or 1-450-476-7676 or e-mail at A220_crc@abc.airbus.
Material information None Accomplishment instructions PART A BD500-A-J53-80-05-01AAA-933A-A PART B BD500-A-J53-80-05-02AAA-933A-A Additional information Additional information
APPENDIX A
DATA SHEET OPERATOR NAME:
AIRCRAFT SERIAL NUMBER:
AIRCRAFT FLIGHT HOURS:
AIRCRAFT FLIGHT CYCLES:
DATE OF INSPECTION:
Tie Rod Part Number L1 (Initial Length) L2 (New length) Rotation Turn (Clockwise (CW), Counter Clockwise (CCW) Left Side C01366900-047 Right Side C01366900-047 Send Data Sheet to:
BD500-538005
See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A End of data module 2020-07-08 Page 7 Customer Response Center (CRC) E-mail: a220_crc@abc.airbus Subject: WTBF Longeron Strut reporting CRM CASE 52403 ref:_00D61HPW2._5004NgVerm:ref (Note: subject must be included exactly as shown above)
BD500-538005
Intentionally left blank See applicability on the first page of the DM BD500-A-J53-80-05-00AAA-930A-A BD500-A-J53-80-05-00AAA-930A-A 2020-07-08 Page 8