Service bulletin · Eurocopter

Revision 2U.S. DOT/FAA - Eurocopter ASB 05A010 · 14 pages · 1.2 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0038; AD 2015-09-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2014-0038 (document 0002) · AD 2015-09-01

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Emergency Alert Service Bulletin
Number
05A010
Latest revision known
05A010, Revision 2, dated April 22, 2013

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 14

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0038; AD 2015-09-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '23cf143dd60de02c826f58120b6a7fe7e1913eb49abd04a53c8d62e05b3effde'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

T.F.S. No. 00000745 Page 1/14 2013.04.22 This document is available on the internet: www.eurocopter.com/techpub

EUROCOPTER

DIRECTION TECHNIQUE SUPPORT 13725 MARIGNANE CEDEX FRANCE

EMERGENCY

ALERT SERVICE BULLETIN

SUPER PUMA NUMBER VERSIONS EC225 05A010 Civil: LP

EC725 05A010 Military: AP

SUBJECT: TIME LIMITS – MAINTENANCE CHECKS

Check of the bonding of the stainless steel protective strip on the leading edge of main rotor blades

ATA: 62

REVISION No. DATE OF APPROVAL DATE OF ISSUE

Revision 0 On: June 28, 2007 2007.06.28 Revision 1 Revision 2 On: July 27, 2007 On: April 22, 2013 2007.07.30 2013.04.22

T.F.S. No. 00000745 Page 2/14 2013.04.22

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters / Installed equipment

Helicopters equipped with main rotor blades P/N:

- 332A11.0050.00

- 332A11.0050.02

- 332A11.0055.00

- 332A11.0055.02

1.A.2. Non-installed equipment

Not applicable.

1.B. ASSOCIATED REQUIREMENTS

Not applicable.

1.C. REASON

To check the bonding of the stainless steel protective strips on the leading edge of the main rotor blades at regular intervals.

The purpose of Revision 1 of this ALERT SERVICE BULLETIN was:

- To enable operators to perform the visual check and the tapping test, scheduled at 85 flying hours, on the leading edge stainless steel protective strip, without removal of the main rotor blades from the helicopter.

Revision 1 had no effect on compliance with Revision 0 of this ALERT SERVICE BULLETIN.

The purpose of Revision 2 of this ALERT SERVICE BULLETIN is to extend the effectivity to main rotor blade part numbers 332A11.0050.02 and 332A11.0055.02.

Revision 2 does not affect compliance with Revision 1 of this ALERT SERVICE BULLETIN.

T.F.S. No. 00000745 Page 3/14 2013.04.22

1.D. DESCRIPTION

Revision 0:

The initial investigations conducted on the main rotor blade showing significant de-bonding of the stainless steel protective strip (see TELEX INFORMATION No. 00000392 issued on June 15, 2007) revealed rapidly progressing de-bonding which may be due to water that may have entered from the crack that was detected in the leading edge stainless steel protective strip.

If this de-bonding remains undetected, it can, in time, cause the loss of the main rotor blade stainless steel protective strip, and vibrations induced by the weight unbalance may compel the pilot to land immediately.

Pending complementary examinations, EUROCOPTER reduced the interval:

- For the visual check for de-bonding and/or cracks which may allow water to enter, then,

- For the tapping test of de-bonded and/or cracked areas identified beforehand, in order to monitor the progress of the de-bonding.

Revision 1:

Initially, EUROCOPTER stipulated that the main rotor blades were to be removed to perform the visual check and the tapping test on the leading edge stainless steel protective strip, scheduled at 85 flying hours, EUROCOPTER is aware of the operational difficulty that may be caused by this task and therefore conducted the necessary tests and checks to modify the operational procedure.

Consequently, EUROCOPTER now authorizes the performance of the required checks without removal of the main rotor blades.

The criteria currently defined in the maintenance documentation are unchanged.

EUROCOPTER rendered compliance with this ALERT SERVICE BULLETIN mandatory.

Revision 2:

The purpose of Revision 2 of this ALERT SERVICE BULLETIN is to extend the effectivity to main rotor blade part numbers 332A11.0050.02 and 332A11.0055.02 following MOD 0740714.

NOTE

The purpose of MOD 0740714 is to replace the current stainless steel tip cap leadi ng edge protection on the blade with a Nickel-Cobalt tip cap leading edge protection. This modification creates new blade P/Nos.

Revision 2 does not affect compliance with Revision 1 of this ALERT SERVICE BULLETIN.

EUROCOPTER renders compliance with this ALERT SERVICE BULLETIN mandatory.

T.F.S. No. 00000745 Page 4/14 2013.04.22

1.E. COMPLIANCE

1.E.1. Compliance at the works

1.E.1.a. On helicopters: Comp ly with paragraph 1.E.2.a.

1.E.1.b. On non-installed equipment: Not applicable.

1.E.2. Compliance in operation: By the operator:

1.E.2.a. On helicopters / installed equipment:

On main rotor blades with P/Nos. 332A11.0050.00 and 332A11.0055.00:

- Comply with paragraph 2.B. within 15 flying hours following receipt of Revision 0 of this ALERT SERVICE BULLETIN, issued on June 28, 2007, and then interpret the results according to the paragraph below.

On main rotor blades with P/Nos. 332A11.0050.02 and 332A11.0055.02:

- Comply with paragraph 2.B. within 15 flying hours following receipt of Revision 2 of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page, and then interpret the results according to the paragraph below.

Interpretation of results:

1) If there is no crack, no cut, no open and no blind de-bonding:

. comply with paragraph 2.B. at intervals not exceeding 85 flying hours.

2) If there is open de-bonding within the permissible criteria inside area D (see Figure 1):

. comply with paragraph 2.B. at intervals not exceeding 85 flying hours.

3) If there is a crack and/or a cut and/or open de-bonding within the permissible criteria outside area D (see Figure 1):

. comply with paragraph 2.B.2.b) and/or 2.B.2.c) and/or 2.B.2.d) at intervals not exceeding 15 flying hours.

1.E.2.b. On non-installed equipment:

On main rotor blades listed in paragraph 1.A.1., having logged flying hours:

- Comply with paragraph 2.B. before installation on a helicopter.

T.F.S. No. 00000745 Page 5/14 2013.04.22

1.F. APPROVAL

Approval is limited to civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in Revision 0 of this ALERT SERVICE BULLETIN was approved on June 28, 2007 under the authority of EASA Design Organization Approval No. 21J.056.

The technical information contained in Revision 1 of this ALERT SERVICE BULLETIN was approved on July 27, 2007 under the authority of EASA Design Organization Approval No. 21J.056.

The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on April 22, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.

For the French Government helicopters, as the content of this ALERT SERVICE BULLETIN is strictly identical to ALERT SERVICE BULLETIN EC225 No. 05A010 of the civil version, the technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on April 22, 2013 under the prerogatives of the recognition of design capability FRA21J-002-DGA.

The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on April 22, 2013 by the EUROCOPTER Airworthiness Department for export military versions.

1.G. MANPOWER

Qualification: Mechanic.

Time for one main rotor blade: Approximately 1 hour to comply with paragraph 2.B.

1.H. WEIGHT AND BALANCE

Not applicable.

1.I. EFFECT ON ELECTRICAL LOADS

Not applicable.

1.J. SOFTWARE MODIFICATION EMBODIMENT STATE

Not applicable.

T.F.S. No. 00000745 Page 6/14 2013.04.22

1.K. REFERENCES

Aircraft Maintenance Manual (MMA), Tasks: 62-10-00-061 – 62-10-00-211.

1.L. OTHER DOCUMENTS CONCERNED

Not applicable.

1.M. TOOLING CONCERNED

Not applicable.

1.N. INTERCHANGEABILITY AND MIXABILITY OF PARTS

Not applicable.

T.F.S. No. 00000745 Page 7/14 2013.04.22

2. ACCOMPLISHMENT INSTRUCTIONS

2.A. GENERAL

The operational procedure given in paragraph 2.B. is described for one main rotor blade and must be applied to the 5 main rotor blades.

2.B. OPERATIONAL PROCEDURE

2.B.1. Preliminary steps

- Open the sliding cowling and the engine cowlings.

- Move the main rotor blade to be checked to the right three-quarter forward position with respect to the aircraft centerline (see Figure 4).

- Apply the rotor brake.

- Position a maintenance platform along the blade leading edge side.

- When performing the tapping test on the blade leading edge stainless steel protective strip:

. on the blade pressure face side, support the main rotor blade tip without lifting it, . on the suction face side, lift the main rotor blade over approximately 75 centimeters at the blade tip.

NOTE

To support and lift the blade, make two wooden supports locally (one for the blade pressure face, and one for the blade suction face, see Figure 3). Put these supports at the blade tip, at the end of the main blade section (see Figure 3).

2.B.2. Visual check and tapping test of the main ro tor blade leading edge stainless steel protective strip

- Carry out a visual check and a tapping test on the leading edge stainless steel protective strip.

. If there is no crack, no cut and no de-bonding:

- Leave as is.

- Return the helicopter to flight configuration in compliance with paragraph 2.B.3. and comply with the instructions of paragraph 1.E.2.a.1.

a) If there is blind de-bonding:

- Make sure that the de-bonded surface area is within the permissible criteria defined in MMA Task 62-10-00-211.

- If the de-bonded surface area is within the permissible criteria:

. Return the helicopter to flight configuration in compliance with paragraph 2.B.3. and comply with the instructions of paragraph 1.E.2.a.1.

- If the de-bonded surface area is beyond the permissible criteria:

. Remove the main rotor blade in accordance with Sub-Task 62-10-00-031-001 of MMA Task 62-10-00-061.

. Remove the blade from service before resuming flights.

T.F.S. No. 00000745 Page 8/14 2013.04.22

b) If there is open de-bonding:

- Make sure that the detected de-bonding is wi thin the permissible criteria defined in MMA Task 62-10-00-211.

. If the de-bonded surface area is within the permissible criteria:

- And this surface area is located inside area D at the end of the blade main section, on the blade tip cap side (see area D Figure 1), return the helicopter to flight configuration in compliance with paragraph 2.B.3. and comply with the instructions of paragraph 1.E.2.a.2.

- And this surface area is located outside area D (see area D Figure 1), return the helicopter to flight configuration in compliance with paragraph 2.B.3., then, every 15 flying hours, carry out a tapping test limited to the detected de-bonded surface area, in order to monitor its behavior.

. If the de-bonded surface area is beyond the permissible criteria:

- Remove the main rotor blade in accordance with Sub-Task 62-10-00-031-001 of MMA Task 62-10-00-061.

- Remove the blade from service before resuming flights.

c) If there is a cut in the blade root polyure thane protective strip (see Figure 2, Area A):

- Carry out a tapping test of the area.

. If there is no de-bonding:

- Return the helicopter to flight configuration in compliance with paragraph 2.B.3., then, . every 15 flying hours, on the blade installed on the helicopter, carry out a tapping test on the blade leading edge stainless steel strip in the blade root area, in the stainless steel leading edge / neoprene junction area, in order to make sure that there is no de-bonding.

. If there is de-bonding, comply with paragraph 2.B.2.b.

d) If there is a crack in the blade leading edge:

- Make sure that the crack is within the perm issible criteria defined in MMA Task 62-10-00-211.

. If the crack is within the permissible criteria:

- Return the helicopter to flight configuration in compliance with paragraph 2.B.3., then, . every 15 flying hours, perform a tapping test in the immediate vicinity of the crack to make sure that there is no de-bonding.

. If there is de-bonding, comply with paragraph 2.B.2.b).

. If the crack is beyond the permissible criteria:

- Remove the main rotor blade in accordance with Sub-Task 62-10-00-031-001 of MMA Task 62-10-00-061.

- Remove the blade from service before resuming flights.

T.F.S. No. 00000745 Page 9/14 2013.04.22

NOTE

Send the results of the check of the main rotor blades, indicating their serial number and that of the helicopter, to:

Etablissement de LA COURNEUVE For the attention of Mr. Olivier TILLIER 2 à 20 Av Marcel Cachin 93123 LA COURNEUVE Cedex France (Fax: +33(0)1.49.39.41.70)

2.B.3. Final steps

- Where necessary, install the blade as per Sub-Task 62-10-00-431-001 of MMA Task 62-10-00-061.

- Remove the maintenance platform from the main rotor blade.

- Close the engine cowlings and the sliding cowling.

2.C. IDENTIFICATION

Record initial compliance with this ALERT SERVICE BULLETIN in the Log Card (FM) of the main rotor blade.

2.D. OPERATING AND MAINTENANCE INSTRUCTIONS

Not applicable.

T.F.S. No. 00000745 Page 10/14 2013.04.22

Figure 1

Area D

T.F.S. No. 00000745 Page 11/14 2013.04.22

332A11.0055.00 332A11.0055.02

332A11.0050.00 332A11.0050.02

Figure 2 Area A Area A

T.F.S. No. 00000745 Page 12/14 2013.04.22 300 mm

Figure 3

Height of the Support

- Blade pressure face: H

- Blade suction face: H + 0.75 meters

Note: H = Height depending on the local access equipment Blade pressure face Support seating zone H