Service bulletin · Airbus Helicopters

On this page

Copies · 4

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 3Airbus Emergency ASB 05A020 Rev 3 · 12 pages · 372 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0922; AD 2025-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2025-0922 (document 0004) · AD 2025-20-10

Revision 2Airbus Helicopters EASB No. 05A020 Rev 2 · 12 pages · 417 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0872; AD 2021-26-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0872 (document 0004) · AD 2021-26-07

Revision 1Airbus Helicopter Emergency ASB 05A020 Rev 1 · 11 pages · 274 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0455; AD 2020-11-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-0455 (document 0003) · AD 2020-11-05

U.S. DOT/FAA - EASB EC130T2 05A020U.S. DOT/FAA - EASB EC130T2 05A020 · 11 pages · 761 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2015-0133; AD 2014-22-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2015-0133 (document 0002) · AD 2014-22-51

Manufacturer
Airbus Helicopters
Type
Emergency Alert Service Bulletin
Number
05A020
Latest revision known
05A020, Revision 3, dated September 19, 2024

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 4

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 2 proposed ADs.

Text · 12OCR

Revision 3, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0922; AD 2025-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'd9b158b587a95474fbbaa666c97d14aeb8b086d31b8ef6c644350f7eb6a911cd'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS

EMERGENCY

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE TIME LIMITS - MAINTENANCE CHECKS - Tail Rotor Hub Check of the tail rotor hub body ATA 64 For the attention of HELICOPTER Version(s) NUMBER CONCERNED Civil Military EC120 05A020 B Revision No. Date of issue Revision 0 2019-10-29 Revision 1 2019-11-08 Revision 2 2021-02-08 Revision 3 2024-09-19 Summary:

During an inspection, Airbus Helicopters was informed of a case of loss of tightening torque on several attachment bolts of the tail rotor hub body.

Following analysis, Airbus Helicopters came to the conclusion that a non-detected case of loss of tightening torque can cause the development of cracks and lead to the loss of the tail rotor drive, which results in the loss of control of the helicopter.

Consequently, Airbus Helicopters makes it mandatory to periodically check for cracks on the tail rotor hub body and to replace components of the hub body / splined flange link every 1000 hours (+100-hour margin) to avoid checking the tightening torque during this period.

Reason for last Revision:

The purpose of revision 3 of this ALERT SERVICE BULLETIN is:

- To exclude from the effectivity the helicopters that have complied with ALERT SERVICE BULLETIN No. 64-21-0001 "Added paint lines to each side of the assembly, hub body and splined tail rotor flange for visual inspection of tightening torque" for "Helicopters/installed equipment or parts"

- To limit the effectivity for "Non installed equipment or parts" Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Export Control:

US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.

FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR Revision 0 2019-10-29 Page 1/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 2OCROpen in PDF

AIRBUS HELICOPTERS

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts All EC120 helicopters which have not complied with ALERT SERVICE BULLETIN No. 64-21-0001.

1.A.2. Non-installed equipment or parts Tail rotor hub body P/N C642A0100103 with a TSN greated than 0 flight hour and which have not complied with this ALERT SERVICE BULLETIN No. 05A020.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Revision 0:

During an inspection, Airbus Helicopters was informed of a case of loss of tightening torque on several attachment bolts of the tail rotor hub body.

Following analysis, Airbus Helicopters came to the conclusion that a non-detected case of loss of tightening torque can cause the development of cracks and lead to the loss of the tail rotor drive, which results in the loss of control of the helicopter.

Consequently, Airbus Helicopters makes it mandatory to periodically check for cracks on the tail rotor hub body and to replace components of the hub body / splined flange link every 1000 hours (+100-hour margin) to avoid checking the tightening torque during this period.

Revision 1:

The purpose of revision 1 is to change the periodic check for cracks on the tail rotor hub body from every 15 FH without exceeding 7 days to every 15 FH.

Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with revision 0 of this ALERT SERVICE BULLETIN.

Revision 2:

The purpose of revision 2 is to:

- inform that Task 64-21-00, 6-5 (AMM) that must be complied with is the one with date code 2020.10.15 or any later date code,

- update the procedure of Task 64-21-00, 6-5 (AMM) to be complied with at intervals of 1000 flight hours (+100-hour margin) (during replacement of the bolts, washers and nuts),

- specify that a100-hour margin is applicable to the 1000-hour inspection.

Revision 2 of this ALERT SERVICE BULLETIN does not affect compliance with the previous revisions of this ALERT SERVICE BULLETIN.

Revision 3:

The purpose of revision 3 of this ALERT SERVICE BULLETIN is:

- To exclude from the effectivity the helicopters that have complied with ALERT SERVICE BULLETIN No. 64-21-0001 "Added paint lines to each side of the assembly, hub body and splined tail rotor flange for visual inspection of tightening torque" for "Helicopters/installed equipment or parts"

- To limit the effectivity for "Non installed equipment or parts" Revision 3 of this ALERT SERVICE BULLETIN does not affect compliance with the previous revisions of this ALERT SERVICE BULLETIN.

Revision 0 2019-10-29 Page 2/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 3OCROpen in PDF

AIRBUS HELICOPTERS

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- performing a check for cracks on the tail rotor hub body, in the zones defined in Figure 1,

- replacing the attachment bolts, washers and nuts of the tail rotor hub body,

- performing a check of the interface between the splined flange and the tail rotor hub body.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

1.E.2. Compliance in service The work on the helicopter and on non-installed equipment must be performed by the operator.

Helicopters/installed equipment or parts:

Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN within 15 flight hours (FH) without exceeding 7 days from receipt of revision 0 of this ALERT SERVICE BULLETIN issued on October 29, 2019.

And, interpret the results:

a) For helicopters with strictly less than 9000 FH

1) If no cracks are found:

- Continue flights, then,

- Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do not exceed 15 FH.

And,

- during the next 1000-hour (+100-hour margin) inspection (detailed check after disassembly of the torsion spider assembly) without exceeding 9000 FH:

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),

• perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4., Then,

- during each 1000-hour (+100-hour margin) inspection (detailed check after disassembly of the torsion spider assembly) :

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM), . perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4.

Revision 0 2019-10-29 Page 3/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 4OCROpen in PDF

AIRBUS HELICOPTERS

2) If a crack is found:

CAUTION

DURING REPLACEMENT OF THE TAIL ROTOR

HUB BODY OR DURING THE DETAILED CHECK

AFTER DISASSEMBLY OF THE TORSION SPIDER

ASSEMBLY, THE BOLTS, WASHERS AND NUTS

OF THE TAIL ROTOR HUB BODY MUST BE

REPLACED WITH NEW BOLTS, WASHERS AND NUTS.

- replace the tail rotor hub body and the bolts, washers and nuts as per paragraph 3.B.3.,

- perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4., Then,

- comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do not exceed 15 FH.

And,

- during each 1000-hour (+100-hour margin) inspection (detailed check after disassembly of the torsion spider assembly):

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM), . perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4.

b) For helicopters with 9000 FH or more

1) If no cracks are found:

If you know the number of flight hours of the attachment bolts (b) of the Tail Rotor Hub If the bolts (b) have strictly less than 9000 FH

- during the next 1000-hour (+100-hour margin) inspection (detailed check after disassembly of the torsion spider assembly) without exceeding 9000 FH:

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),

• perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4., Then,

- Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do not exceed 15 FH.

And, at intervals that do not exceed 1000 FH (+100-hour margin):

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM), . perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4.

Revision O 2019-10-29 Page 4/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 5OCROpen in PDF

AIRBUS HELICOPTERS If you do not know the number of flight hours of the attachment bolts (b) of the TRH or if the bolts (b) have 9000 FH or more

- Replace the attachment bolts, washers and nuts of the tail rotor hub body within 15 flight hours (FH) without exceeding 7 days from receipt of revision 0 of this ALERT SERVICE BULLETIN issued on October 29, 2019.

Then,

- Comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do not exceed 15 FH.

- at intervals that do not exceed 1000 FH (+100-hour margin) from the first replacement of the bolts, washers and nuts:

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),

• perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4.

2) If a crack is found:

CAUTION

DURING REPLACEMENT OF THE TAIL ROTOR

HUB BODY OR DURING THE DETAILED CHECK

AFTER DISASSEMBLY OF THE TORSION SPIDER

ASSEMBLY, THE BOLTS, WASHERS AND NUTS

OF THE TAIL ROTOR HUB BODY MUST BE

REPLACED WITH NEW BOLTS, WASHERS AND NUTS.

- replace the tail rotor hub body and the bolts, washers and nuts as per paragraph 3.B.3.,

- perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4.,

- comply with paragraphs 3.B.1. and 3.B.2. of this ALERT SERVICE BULLETIN at intervals that do not exceed 15 FH.

- at intervals that do not exceed 1000 FH (+100-hour margin):

. replace the bolts, washers and nuts as per Task 64-21-00, 6-8 (AMM),

• perform the detailed check of the splined flange at the interface between the splined flange and the tail rotor hub body as per Task 64-21-00, 6-5 (AMM) and, if necessary, replace the splined flange as per paragraph 3.B.4.

Non-installed equipment or parts:

Comply with paragraph 3.B.2. at the latest before installation on the helicopter.

Revision 0 2019-10-29 Page 5/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 6OCROpen in PDF

AIRBUS HELICOPTERS

1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:

Qualification: - 1 Mechanical Technician.

Or

- 1 Pilot appropriately trained and certified as per the local regulations in force.

The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours: approximately 15 minutes to perform a visual check for cracks.

1.H. WEIGHT AND BALANCE There is no change in weight and moment.

1.I. POWER CONSUMPTION Not changed.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2019-10-29 Page 6/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 7OCROpen in PDF

AIRBUS HELICOPTERS

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN Aircraft Maintenance Manual (AMM):

AMM: 64-21-00, 4-3: Tail Rotor Hub - Disassembly - Tail Rotor Hub AMM: 64-21-00, 4-4: Tail Rotor Hub - Assembly - Tail Rotor Hub AMM: 64-21-00, 6-4: Tail Rotor Hub - Detailed Check - Hub Body Assembly AMM: 64-21-00, 6-8: Tail Rotor Hub - Detailed Check - Torsion Spider Assembly Aircraft Maintenance Manual (AMM) issued with date code 2020.10.15 or any later date code:

AMM: 64-21-00, 6-5: Tail Rotor Hub - Detailed Check - Splined Flange Information Notice (IN):

IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight Safety Promotion Notice (SPN):

SPN: 3703-P-00: GENERAL - Foreign Object Damage prevention

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2019-10-29 Page 7/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 8OCROpen in PDF

AIRBUS HELICOPTERS

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Contact the Sales and Customer Relations Department to know the delivery lead times.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

Designation Qty New P/N Item P/N Old → Instruction Hub body AR C642A0100103 1 C642A0100103 Splined flange AR C642A0104202 2 C642A0104202 Equipment or parts to be ordered separately:

Designation Qty New P/N Item Old P/N → Instruction Hexagonal head bolt AR 22201BE060008L 3 22201BE060008L Washer AR ASNA0265-060 4 ASNA0265-060 Washer AR EN2138-06005 5 EN2138-06005 Nut A/R ASN52320BH060N 6 ASN52320BH060N Revision 0 2019-10-29 Page 8/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 9OCROpen in PDF

AIRBUS HELICOPTERS Consumables to be ordered separately:

As per the Tasks indicated in this ALERT SERVICE BULLETIN.

You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).

If you can't get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Designation Qty Tool P/N or equivalent Item Mirror AR Commercial ZZ

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2019-10-29 Page 9/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 10OCROpen in PDF

AIRBUS HELICOPTERS

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Not applicable.

3.B. WORK STEPS

CAUTION

MAKE SURE THAT YOU PREVENT ALL POSSIBLE FOREIGN OBJECT DAMAGE (FOD). REFER TO

SAFETY PROMOTION NOTICE (SPN) NO. 3703-P-00.

3.B.1. Preliminary steps

- Remove the fairing plug (h).

- Remove the fairing (g) (Detail A, Figure 1).

- If necessary, release the rotor brake.

3.B.2. Inspection of the hub body (a) (Figure 1)

- Perform a visual inspection of the hub body (a), (Figure 1).

• Using a light source and, if necessary, a mirror (zz) (e.g. dentist's mirror), make sure that there are no cracks in the hub body, in the inspection area defined as per Figure 1.

- Turn the tail rotor by hand to check the entire inspection area defined as per Figure 1.

- Interpret the results as per paragraph 1.E.2

3.B.3. Replacement of the hub body (a) (Figure 1)

- Remove and discard the hub body (a), (Figure 1) as per Task 64-21-00, 4-3 (AMM).

- Discard the bolts (b), the washers (c) and (d) and the nuts (e).

- Install the hub body (1) as per Task 64-21-00, 4-4 (AMM) with bolts (3), washers (4) and (5) and nuts (6).

3.B.4. Replacement of the splined flange (f) (Figure 1)

- Remove the splined flange (f) (Figure 1) as per Task 64-21-00, 4-3 (AMM).

- Install the splined flange (2) as per Task 64-21-00, 4-4 (AMM).

3.B.5. Final steps

- Install the fairing (g).

- Install the fairing plug (h).

- If necessary, apply the rotor brake.

Revision 0 2019-10-29 Page 10/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 11OCROpen in PDF

AIRBUS HELICOPTERS

3.C. RECORD OF COMPLIANCE Compliance with this document:

- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):

QR code or hypertext link NOTE recording compliance ALERT SERVICE BULLETINS in the SB Insight tool does not replace the recording in the helicopter documents.

ASB EC120-05A020

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Revision 0 2019-10-29 Page 11/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 12OCROpen in PDF

AIRBUS HELICOPTERS Inspection area b, c, d, e 3, 4, 5,6 2 Interface area between the splined flange and the hub body Return to paragraph 3.B.2.

Return to paragraph 3.B.3.

Return to paragraph 3.B.4.

Figure 1 Revision 0 2019-10-29 Page 12/12 Revision 3 2024-09-19 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed