On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 15OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0878; AD 2022-14-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0f03368d3182b1d7ddc0637970b99667630bbcf1c7a548a91f60b00546a55f18' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0f03368d3182b1d7ddc0637970b99667630bbcf1c7a548a91f60b00546a55f18' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE MAIN ROTOR - Main Rotor HUB (MRH) Inspection of the MRH sleeves For the attention of HELICOPTER Version(s) CONCERNED NUMBER Civil Military EC225 62A017 LP EC725 62A017 Revision No. Date of issue Revision 0 2022-06-30 Summary:
The purpose of this ALERT SERVICE BULLETIN is to make sure that, on the MRH sleeves MP/N 332A31-3071-00 defined specific area with paint flaking or under possible paint touch up, there is no crack, no corrosion.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Revision 0 2022-06-30 Page 1/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters EC225 version LP and EC725 version AP with MRH that have sleeves MP/N 332A31-3071-00.
NOTE 1 Refer to the Log Card (FM) of the MRH to identify the current notification status of the equipment.
1.A.2. Non-installed equipment or parts
- MRH that have sleeves MP/N 332A31-3071-00
- Sleeves MP/N 332A31-3071-00.
NOTE 2 Refer to the Log Card (FM) of the MRH to identify the current notification status of the equipment.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON During blade replacement, resulting from rotor balancing difficulties, a crack was observed on one MRH sleeve (Figure 1).
Figure 1 Consequently, the purpose of this ALERT SERVICE BULLETIN is to make sure that, on the MRH sleeves MP/N 332A31-3071-00 defined specific area (See Figure 3) with paint flaking or under possible paint touch up, there is no crack, no corrosion.
For information, in the frame of this incident, SIN No. 3786-S-62 and No. 3792-S-05 has been already released.
Revision 0 2022-06-30 Page 2/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
1.D. DESCRIPTION The ALERT SERVICE BULLETIN includes the work steps that follow:
- Do a visual inspection of the MRH sleeves.
- Make sure that there is no paint flaking and no paint touch up on defined specific area (See Figure 3) of each sleeve,
- If necessary, make sure there is no crack and no corrosion on each sleeve.
- Analyze the results.
- If necessary, replace the sleeves).
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service Helicopters/installed equipment or parts:
The operator must do the work on the helicopter.
During the next Before First Flight visit after you received the Revevision 0 of this ALERT SERVICE BULLETIN, comply with paragraph 3.
Non-installed equipment or parts:
Before you install the MRH and/or the sleeve (a) identified in paragraph 1.A.2. of this ALERT SERVICE BULLETIN, do a check of the MRH (b) and/or the sleeve (a) when applicable as given in paragraph 3.B.4. (except new MRH and/or new sleeve with 0 Flight Hour (FH)).
1.F. APPROVAL Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on June 30, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on June 30, 2022 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision Owas approved on June 30, 2022 by the Airbus Helicopters Airworthiness Department for export military versions.
Revision 0 2022-06-30 Page 3/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
1.G. MANPOWER Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualifications:
Qualification: - 1 Mechanical Technicians for the visual inspection
- 1 specialist with level 2 for detection by EDDY currents (Eddy Current calibration has to be done on with reference sample in Ferritic Stainless steel refer to the standard EN4179 and NAS410).
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: one hour for one Mechanical Technician for the visual inspection.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is one hour to comply with paragraph 3. (for visual inspection only).
1.H. WEIGHT AND BALANCE Not applicable.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Aircraft Maintenance Manual (MMA):
MMA: 62-21-00-061: Removal-Installation of Sleeve/Spherical Thrust Bearing Assembly - MAIN ROTOR Standard Practices Manual (MTC):
MTC: 20-02-07-403: Use of AERODUR 43022 varnish - Electrical bonding MTC: 20-04-02-401: Chemical stripping of organic surface finishes - Stripping MTC: 20-04-05-434: Application of metal primer scheme P50 - Paint and primer application procedure MTC: 20-04-05-436: Application of paint touch-ups - Paint and primer application procedure MTC: 20-90-03-104: Detection by dye penetrant inspection - Corrosion detection MTC: 20-90-03-108: Detection by EDDY currents - Corrosion detection Information Notices (IN):
IN: 2832-1-00: Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical investigation/core unit return IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight Safety Information Notices (SIN):
SIN: 3786-S-62: Track and Balance adjustment difficulty SIN: 3792-S-05: Treatment of damages during regular inspections - Flight safety Revision 0 2022-06-30 Page 4/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2022-06-30 Page 5/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.
Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:
Old Key Word Qty New P/N Item P/N→ Instruction Sleeve AR 332A31-3071-00 1 332A31-3071-00 Replace if necessary.
Consumables to be ordered separately:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN and list below:
Key Word Qty P/N Item 120-grit abrasive cloth AR Commercial P/N 1 400-grit abrasive cloth AR Commercial P/N 2 You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Revision 0 2022-06-30 Page 6/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS Special tools:
Refer to the Tasks and Work Cards given in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED Use the procedure given in Information Notice No. 2832-1-00 to send the material back.
Revision 0 2022-06-30 Page 7/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL Not applicable.
3.B. WORK STEPS
3.B.1. Sleeve inspection - Visual inspection and check for absence of crack Before first flight visit after you received the revision 0 of this ALERT SERVICE BULLETIN:
- Do a detailed visual inspection of the specific area (See Figure 3) of each sleeve (a) of the MRH (b) (Figure 2).
- Make sure that there is no:
. Paint flaking.
. Paint touch up (Refer to SIN No. 3792-S-05).
There is a paint NO flaking and/or a YES After the before first flight visual inspection, before the next flight, do a detailed visual inspection of the paint touch up? affected area(s) for absence of visible crack.
There is a YES visible crack?
Resume flights.
• NO Within 15 flight hours or 3 months (the first limit 1 specialist with you meet is applicable) after the visual inspection:
level 2 for detection - Check by EDDY currents for absence of sleeve by EDDY currents. crack (See Figure 3). Refer to Work Card 20-90-03-108 (MTC)*.
Before the next flight:
- Comply with paragraph 3.B.2.
Or, alternatively
- Comply with paragraph 3.B.3.
NO There is a crack?
→ YES
- Stop flights
- Remove the sleeve (a) (Figure 2). Refer to Task 62-21-00-061 (MMA).
- Send Back the sleeve (a) to Airbus Helicopters, refer to paragraph 2.D.
- Install an airworthy sleeve (1). Refer to Task 62-21-00-061 (MMA).
- Resume flights.
Revision 0 2022-06-30 Page 8/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
3.B.2. Sleeve supplemental inspection for absence of corrosion
- Do a chemical stripping. Refer to Work Card 20-04-02-401 (MTC).**
- Check for absence of sleeve corrosion with fluo agent. Refer to Work Card 20-90-03-104 (MTC).
** Do an overshoot of chemical stripping on the flaking area and/or the paint touch up area.
- Remove corrosion by manual touch NO There is YES up with abrasive cloth (1), then (2).
corrosion? - Repeat check for absence of sleeve corrosion with fluo agent. Refer to Work Card 20-90-03-104 (MTC).
- Do a primer and paint protection.
Refer to Work Card 20-04-05-436 (MTC).
- Resume flights.
YES The corrosion NO was removed?
- Dry the sleeve (a).
- Apply a protective coating.
Refer to Work Card 20-04-05-434 (MTC).
- Do a primer and paint protection.
Refer to Work Card 20-04-05-436 (MTC).
- Repetitively check by EDDY currents for absence of sleeve crack at interval inspection not exceeding 15FH. Refer to Work Card 20-90-03-108 (MTC)*.
- If there is no crack after 75 flight hours, no more action is required.
NO There is a YES crack?
Stop flights and contact Airbus Helicopters for a deep polish process or other solution:
- Make a Technical Event (TE) to the address that follow:
https://airbusworld.helicopters.airbus.com
- Comply with the specific corrective action defined by Airbus Helicopters.
- Resume flight.
1 specialist with level 2 for detection by EDDY currents.
- Stop flights
- Remove the sleeve (a) (Figure 2).
Refer to Task 62-21-00-061 (MMA).
- Send Back the sleeve (a) to Airbus Helicopters, refer to paragraph 2.D.
- Install an airworthy sleeve (1).
Refer to Task 62-21-00-061 (MMA).
- Resume flights.
Revision 0 2022-06-30 Page 9/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
3.B.3. Alternative to sleeve supplemental inspection for absence of corrosion Do a primer and paint protection. Refer to Work Card 20-04-05-436 (MC).
Or, Apply varnish only on the flaking area. Refer to Work Card 20-02-07-403 (MTC).
- Repetitively check by EDDY currents for absence of sleeve crack at interval inspection not exceeding 15FH. Refer to * 1 specialist with Work Card 20-90-03-108 (MTC)*. level 2 for detection
- Alternatively, comply with paragraph by EDDY currents.
3.B.2. to do a sleeve supplemental inspection for absence of corrosion with fluo agent.
- When actions of paragraph 3.B.2. are accomplished:
. No more repetitive crack check is - Stop flights required. - Remove the sleeve (a) (Figure 2). Refer to Task 62-21-00-061 (MMA).
- Send Back the sleeve (a) to NO There is a crack? YES Airbus Helicopters, refer to paragraph 2.D.
- Install an airworthy sleeve (1). Refer to Task 62-21-00-061 (MMA).
- Resume fliahts.
Revision 0 2022-06-30 Page 10/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
3.B.4. Work steps for Non-installed parts
- Do a detailed visual inspection of the specific area (See Figure 3) of each sleeve (a) of the MRH (b) (Figure 2) or
- Do a detailed visual inspection of the specific area (See Figure 3) of each sleeve (a) not installed on the MRH (b)
- Make sure that there is no:
• Paint flaking.
. Paint touch up. Refer to SIN No. 3792-S-05.
There is a paint Do a detailed visual inspection NO flaking and/or a YES of the affected area(s) for paint touch up? absence of visible crack.
NO There is a YES visible crack?
The MRH (b) and/or the sleeve (a) can be installed.
Check by EDDY currents for absence of sleeve crack (See Figure 3). Refer to Work Card 20-90-03-108 (MTC)*.
* 1 specialist with NO There is a YES level 2 for detection crack?
by EDDY currents.
* Do an overshoot of chemical stripping on the flaking area and/or the paint touch up area
- Do a chemical stripping. Refer to - If the sleeve (a) is installed Work Card 20-04-02-401 (MTC).** on the (MRH (b):
- Check for absence of sleeve . Remove the sleeve (a) corrosion with fluo agent. Refer to (Figure 2). Refer to the Work Card 20-90-03-104 (MTC). Task 62-21-00-061 (MMA).
. Install an airworthy sleeve (1). Refer to the Task 62-21-00-061 (MMA).
. Send Back the removed
- Do a primer and paint protection. sleeve (a) to Work Card 20-04-05-436 (MTC). Refer to NO corrosion? There is YES Airbus Helicopters, refer to paragraph 2.D.
- The MRH (b) and/or the sleeve (a) - If the sleeve (a) is not can be installed. installed on the (MRH (b):
• Send Back the sleeve (a) to Airbus Helicopters, refer to paragraph 2.D.
Revision 0 2022-06-30 Page 11/15 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS
- Remove corrosion by manual touch up with abrasive cloth (1), then (2).
- Repeat check for absence of sleeve corrosion with fluo agent. Refer to Work Card 20-90-03-104 (MTC).
Contact Airbus Helicopters for a deep polish process or other solution:
- Make a Technical Event (TE) to the The corrosion NO address that follow:
was removed? https://airbusworld.helicopters.airbus.com
- Comply with the specific corrective action defined by Airbus Helicopters.
- The MRH (b) and/or the sleeve (a) can bea YES installed.
- Dry the sleeve (a).
- Apply a protective coating.
Refer to Work Card 20-04-05-434 (MTC).
- Do a primer and paint protection.
Refer to Work Card 20-04-05-436 (MTC).
The MRH (b) and/or the sleeve (a) can be installed. * 1 specialist with level 2 for detection by EDDY currents -After installation on the helicopter, keep under close monitoring each MRH sleeve
(a) on which corrosion was removed.
- Repetitively check by EDDY currents for absence of sleeve crack at interval inspection not exceeding 15FH. Refer to Work Card 20-90-03-108 (MTC)*.
- If there is no crack after 75 flight hours, no more action is required.
- Stop flights
- Remove the sleeve (a) (Figure 2). Refer to Task 62-21-00-061 (MMA).
NO There is a crack? YES - Send Back the sleeve (a) to Airbus Helicopters, refer to paragraph 2.D.
- Install an airworthy sleeve (1). Refer to Task 62-21-00-061 (MMA).
- Resume flights.
Revision 0 2022-06-30 Page 12/15 This document is available on the Internet: www.airbushelicopters.com/techpub/