Service bulletin · Eurocopter

No revision namedEurocopter ASB BO 105 LS 30-12 · 6 pages · 838 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-0887; AD 2013-16-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2012-0887 (document 0005) · AD 2013-16-13

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Alert Service Bulletin
Number
BO 105

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 6

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

All 6 ADs

Also cited in 2 proposed ADs.

Text · 6OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-0887; AD 2013-16-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '807b95018e39b2ce57b9572b60e1be916956604aa251191e82785944799d8129'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

eurocopter an EADS Company

EUROCOPTER CANADA LIMITED ALERT

SERVICE BULLETIN BO 105 LS A-3 No: ASB BO 105 LS 30-12 Date: December 12, 2008 Subject: Tail Rotor - Check of balance weights and control lever

1. PLANNING A. Effectivity

(1) Helicopters Affected: All BO 105 LS A-3 helicopters

(2) Components Affected: Fly weight 117-31715.01 or 117-31715.02 B642M1011 201 105-317171.10 Control lever assembly 105-31736 or 105-31767

(3) Spare Parts Affected: Not applicable B. Reason During a periodical inspection of a BO 105 helicopter, corrosion was detected on the tail rotor balance weights in the area of the thread. At an advanced stage, this corrosion could possibly destroy the threads. In order to be able to recognize this damage and to replace the damaged components, a visual inspection is introduced with this Alert Service Bulletin. (The BO 105 LS A-3 is similar in this area.

December 12, 2008 Page 1 of 6 ASB BO 105 LS 30-12

Page 2OCROpen in PDF

eurocopter an EADS Company

EUROCOPTER CANADA LIMITED C. Description Check balance weights and control levers on tail rotor. Replace damaged balance weights and control levers.

D. Compliance

1.D.1. Accomplish inspection of the balance weights and the control levers in accordance with Section 2.B of this Alert Service Bulletin within the next 100 flight hours after receipt of this Alert Service Bulletin, but by February 28, 2009 at the latest.

1.D.2. After this, the inspection of the balance weights and the control levers must be regularly accomplished together with the PERIODICAL INSPECTION".

1.D.3. If damage is detected at the inspection in accordance with Section 2.B.3 and/or 2.B.4 which is not within the admissible damage limits, replace the affected component before the next flight.

E. Approval Engineering aspects of this bulletin have been Transport Canada approved.

F. Manpower Requirements Approx. 4 man-hours G. Material, Cost and Availability Pricing and availability information is available upon request. Refer to Section 3 for material.

H. Special Tools (not applicable) Mass and Moment (not applicable) J. Reference BO 105 LS A-3 Maintenance Manual K. Other Publications Affected This Alert Service Bulletin will be incorporated in the following document with a future revision to the Maintenance Manual.

L Electrical Load Data (not affected) December 12, 2008 Page 2 of 6 ASB BO 105 LS 30-12

Page 3OCROpen in PDF

eurocopter an EADS Company

EUROCOPTER CANADA LIMITED

2. ACCOMPLISHMENT INSTRUCTIONS A. Inspections Required (not applicable) B. Work Procedure

1. Remove balance weights from control lever:

Apply marks to the balance weights before they are removed in order to be able to re-establish the correct assignment and the old installation position towards the control lever when the balance weights are installed.

2. Remove cotter pins (3, Figure 1) and remove balance weights (2) from control lever (1). Discard cotter pins (3).

3. Check balance weights (1, Figure 2) for corrosion and/or mechanical damage:

- If no corrosion or mechanical damage is detected in the thread area and on the cylindrical mating surfaces of the balance weights, proceed in accordance with Section

2.B.4.

- If damage to the threads on less than 25 percent of the respective thread is detected, the balance weights can be easily screwed and the cylindrical mating surfaces are not damaged, remove corrosion using suitable means. Proceed in accordance with Section 2.B.4.

- If damage to the threads on more than 25 percent of the respective thread is detected or the cylindrical mating surfaces are extensively damaged, replace balance weights before the next flight. Proceed in accordance with Section 2.B.4.

4. Check control lever (2, Figure 2) for corrosion and/or mechanical damage:

- If no corrosion or mechanical damage is detected, proceed in accordance with Section

- If mechanical damage and/or corrosion is detected, polish out damage using polishing cloth 600.

- If a depth of a maximum of 0.3 mm is not exceeded when polishing out and the diameter of the control lever is not less than a minimum measure of

9.95 mm, proceed in accordance with Section 2.B.2.

- If a depth of 0.3 mm is exceeded when polishing out and/or the diameter of the control lever in the transition area towards the thread is less than a minimum measure of 9.95 mm, replace control lever before the next flight.

5. Install balance weights to control lever:

NOTE Ensure during installation of the balance weights that the balance weights are correctly assigned and installed to the control lever in accordance with the applied marks.

6. Apply corrosion preventive paste (CM 510) onto thread of control lever (1, Figure 1).

December 12, 2008 Page 3 of 6 ASB BO 105 LS 30-12

Page 4OCROpen in PDF

eurocopter an EADS Company

EUROCOPTER CANADA LIMITED

7. Screw on balance weights (2, Figure 1) until the position on the control lever (1) that was marked at the removal has been reached. Secure balance weights (2) using new cotter pins (3).

NOTE If vibrations on the tail rotor are detected during operation of the helicopter, balance tail rotor in accordance with Maintenance Manual, Chapter 33-3.

8. Confirm accomplishment of this Alert Service Bulletin by an entry in the historical record of the helicopter.

C. Conclusions (not applicable)

3. MATERIAL INFORMATION

3.1. Required Parts:

No. _ Qty. Nomenclature Part No.

1 2 Split pin** LN94-30022 2 A/R Corrosion preventive paste (CM 510)* * Consumable material, to be ordered from the Interturbine company.

** Standard part, item must be separately ordered as needed.

December 12, 2008 Page 4 of 6 ASB BO 105 LS 30-12

Page 5OCROpen in PDF

eurocopter an EADS Company

EUROCOPTER CANADA LIMITED 2x2 3x2

• 2x2 3x2 1 Control lever assembly (1) 2 Fly weight Split pin LN94-30022

• Apply corrosion preventive paste (CM 510) onto thread.

Figure 1 Tail Rotor Balance Weights December 12, 2008 Page 5 of 6 ASB BO 105 LS 30-12

Page 6OCROpen in PDF

eurocopter an EADS Company

EUROCOPTER CANADA LIMITED 1 Fly weight 2 Control lever assembly A Check areas for corrosion and/or mechanical damage.

Figure 2 Inspection of Balance Weights and Control Lever December 12, 2008 Page 6 of 6 ASB BO 105 LS 30-12