Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters ASB EC120-04A008 Rev 0 · 10 pages · 247 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0239; AD 2020-12-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-0239 (document 0004) · AD 2020-12-02

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC120-04A008

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 10OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0239; AD 2020-12-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'd02e74d97cfb9cd95d6cf83c360992a4c5543b9fa08f2fa4aeb82e73ebfb5cf2'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008 Civil version: B

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE LIMITATIONS - Tail Rotor Hub Introduction of a new part number and re-identification of the Equipped Blades of the Tail Rotor Hub For the attention of Revision No. Date of issue Revision O 2018-07-18 Summary:

As the manufacturing process for the equipped blades has changed, Airbus Helicopters has introduced a new part number for these equipped blades.

This ALERT SERVICE BULLETIN makes their re-identification mandatory, without affecting the Service Life Limit (SLL) of the equipped blades mentioned in the Airworthiness Limitations Section (ALS).

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Revision 0 2018-07-18 Page 1/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008 1- PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts EC120 version B helicopters with equipped blades part number C642A0300103 whose serial numbers are listed in Appendix 4.A., NOTE 1 Refer to the Log Card of the Tail Rotor Hub (TRH) to identify the actual modification status of the helicopter.

1.A.2. Non-installed equipment or parts

- Equipped blade P/N C642A0300103 whose serial numbers are listed in Appendix 4.A.

- Tail Rotor Hub P/N C642A0110054 or C642A0110056 equipped with at least one blade P/N C642A0300103.

P/N Serial number NOTE 2 The part number and serial number of the equipped blade can be found on:

- the equipped blade,

- Form 1 for the equipped blade,

- the Tail Rotor Hub Log Card.

The figure above is provided for reference, to show the location of the part number and serial number on an equipped blade.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON As the manufacturing process for the equipped blades has changed, Airbus Helicopters has introduced a new part number for these equipped blades.

This ALERT SERVICE BULLETIN makes their re-identification mandatory, without affecting the Service Life Limit (SLL) of the equipped blades mentioned in the Airworthiness Limitations Section (ALS).

Revision 0 2018-07-18 Page 2/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- checking the part number of the equipped blades of the Tail Rotor Hub (C642A0300103 + serial number) and the associated Tail Rotor Hubs,

- completing the Tail Rotor Hub Log Card for the equipped blades concerned,

- re-identifying the equipped blades of the Tail Rotor Hubs concerned.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/Installed equipment or parts:

Not applicable.

Non-installed equipment or parts:

Before delivery of the equipped blades refer to Form1 to check the part number and the serial numbers of the equipped blades in stock. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

- for the serial numbers concerned:

• comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN, . edit a new Form 1.

Before delivery of the Tail Rotor Hub refer to log card for the Tail Rotor Hub to check the part number and the serial numbers of the equipped blades. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

- for the serial numbers concerned, Airbus Helicopters makes compliance with paragraph 3. of this ALERT SERVICE BULLETIN mandatory.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

The work on the helicopter is to be performed by the operator.

Revision 0 2018-07-18 Page 3/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

- Within 12 months from receipt of this ALERT SERVICE BULLETIN, issued on the date indicated in the page footer, refer to the Tail Rotor Hub Log Card to check the part number and the serial numbers of the installed equipped blades. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

• Completion of the documentation .. For the serial numbers concerned, comply with paragraph 3.B.1. of this ALERT SERVICE BULLETIN.

.. For the serial numbers not concerned, no additional action is required.

- No later than the next disassembly of the Tail Rotor Hub:

• Re-identification of the equipped blades .. For the serial numbers concerned, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN.

NOTE 3 The disassembly of the Tail Rotor Hub is scheduled at 1000 flight hours // 24 months to complete the detailed check of the TRH blade assemblies.

Non-installed equipment or parts:

For an equipped blade alone:

- Before installation, refer to Form1 to check the part number and the serial number of the equipped blades in stock. Compare the serial number of the equipped blade with the list of serial numbers in Appendix 4.A., to determine whether it is concerned:

. for the serial number concerned, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN.

For Tail Rotor Hub:

- Before installation, refer to the Tail Rotor Hub Log Card to check the part number and the serial numbers of the equipped blades in stock. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

for the serial numbers concerned, comply with paragraph 3. of this ALERT SERVICE BULLETIN.

Revision 0 2018-07-18 Page 4/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification COA08001 approved on June 1, 2018 by EASA for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 18, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

1.G. MANPOWER & For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualification:

Qualification:

- 1 Mechanical Technician.

The time for the operations is indicated for reference, for a standard configuration.

Time for the operation:

- Approximately 30 minutes for the Mechanical Technician (for an equipped blade removed).

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2018-07-18 Page 5/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

1.K. REFERENCES The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:

MTC: 20.02.07.403: Use of Vernelec 43022 varnish - Electrical bonding, MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft - Cleaning, MTC: 20.04.04.403: Touch-up of protective treatment with ALODINE 1200 - Surface treatment before painting, MTC: 20.08.05.101: Drafting and updating the Log Card (FM) General rules applicable to aircraft, MTC: 20.08.05.103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft, MTC: 20.60.00.401: General Recommendations - Blades standard practices, AMM: Aircraft Maintenance Manual, ALS: Airworthiness Limitations Section: (04-10-00 Airworthiness Limitations (SLL)), MSM: Master Servicing Manual.

1.L. OTHER AFFECTED PUBLICATIONS The modification will be integrated into the following manual:

ALS.

This document will be issued again at a later date.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

Tail Rotor Hub equipped blades P/N C642A0300103 and P/N C642A0300105 are interchangeable.

Mixability:

Mixing Tail Rotor Hub equipped blades P/N C642A0300103 and P/N C642A0300105 is permitted.

Revision 0 2018-07-18 Page 6/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Not applicable.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Consumables to be ordered separately:

As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:

Designation Qty Consumable P/N Item Cleaning agent AIR METHYL ETHYL KETONE 217 1 Chemical transformation agent A/R ALODINE1200 316 2 Varnish A/R ECS2228.10 514 3 The products can be ordered separately from the company KLX AEROSPACE SOLUTIONS.

Internet address: https://www.kixaerospace.com/klxaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888 Special tools:

As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:

Designation Qty Tool P/N or equivalent Item Vibration scriber 1 Commercial reference ZZ

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2018-07-18 Page 7/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Read and comply with the general instructions concerning standard practices applicable to blades as per Work Card 20.60.00.401 (MTC).

3.B. WORK STEPS NOTE The serial number of an equipped blade remains unchanged following the application of this ALERT SERVICE BULLETIN.

3.B.1. Fill in the Log Card (FM)

- On the Log Card:

. cross out the part number of the equipped blade, leaving it legible, . note the new part number, . record compliance with this ALERT SERVICE BULLETIN as per paragraph 3.C.

3.B.2. Re-identification of the equipped blades

- Clean the area containing the part number and serial number of the equipped blades using the cleaning agent (1) as per Work Card 20.04.01.102 (MTC).

- Using a vibration scriber (zz) and as per Work Card 20.08.05.103 (MTC):

. cross out the part number C642A0300103, leaving it legible, . mark the new part number C642A0300105 under the serial number.

- Protect the vibration scribed zones using chemical conversion material (2) as per Work Card

20.04.04.403 (MTC).

- Apply varnish (3) as per Work Card 20.02.07.403 (MTC).

Equipped C642A blade 0300105 3 Figure 1

- Record compliance with this ALERT SERVICE BULLETIN as per paragraph 3.C.

Revision 0 2018-07-18 Page 8/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

3.C. COMPLIANCE CONFIRMATION Compliance with this document:

- For installed equipment or parts:

When complying with paragraph 3.B.1.:

• record compliance with paragraph 3.B.1. of this ALERT SERVICE BULLETIN, with the revision number on the Tail Rotor Hub Log Card.

. note: « paragraph 3.B.2. of the ALERT SERVICE BULLETIN No. 04A008 must be complied with mandatorily during the next disassembly of the Tail Rotor Hub» on the Tail Rotor Hub Log Card.

When complying with paragraph 3.B.2.:

• record complete compliance with this ALERT SERVICE BULLETIN, with the revision number on the Tail Rotor Hub Log Card.

- For non-installed equipment or parts:

• record complete compliance with this ALERT SERVICE BULLETIN, with the revision number, on the Tail Rotor Hub Log Card Identification of modifications on equipment or parts:

Identify the equipped blades of the Tail Rotor Hub using the table below and Work Card 20.08.05.103 (MC):

Designation Former P/N New P/N MOD Type of marking Equipped blade C642A0300103 C642A0300105 Vibration scribing

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:

Not applicable.

Maintenance instructions:

Refer to the Master Servicing Manual (MSM) in effect.

Refer to the Aircraft Maintenance Manual (AMM) in effect.

The deadlines for new part numbers for the equipped blades on the Tail Rotor Hub in the Airworthiness Limitations Section (ALS) are identical to the old part numbers. The Airworthiness Limitations Section (ALS) will incorporate the new part numbers as part of a future revision.

Revision 0 2018-07-18 Page 9/10 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC120-04A008

4. APPENDIX

4.A. Tail Rotor Hub Equipped blade (P/N) C642A0300103 serial numbers (S/N) M5596 M5630 M5725 M5598 M5631 M5726 M5599 M5632 M5730 M5600 M5633 M5732 M5601 M5634 M5735 M5602 M5635 M5736 M5603 M5636 M5737 M5604 M5637 M5739 M5605 M5643 M5741 M5606 M5644 M5742 M5607 M5645 M5747 M5608 M5646 M5749 M5609 M5647 M5750 M5610 M5648 M5752 M5611 M5652 M5753 M5612 M5656 M5754 M5613 M5658 M5614 M5659 M5615 M5663 M5616 M5664 M5617 M5667 M5618 M5669 M5619 M5670 M5620 M5673 M5621 M5674 M5622 M5675 M5623 M5716 M5624 M5717 M5625 M5719 M5626 M5720 M5627 M5721 M5628 M5723 M5629 M5724 Revision 0 2018-07-18 Page 10/10 This document is available on the Internet: www.air ushelicopters.com/techpub/