On this page
Text · 9OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1114, the docket of AD 2021-04-21. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '17f3ff2257f1fd255cc0361b4ce9f60083eaa54693882ba05df47713edd9237c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '17f3ff2257f1fd255cc0361b4ce9f60083eaa54693882ba05df47713edd9237c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB No. EC120-05A019 Civil version(s): B
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE TIME LIMITS - MAINTENANCE CHECKS - Main Rotor Hub Inspection of rotating and non-rotating scissors bolts ATA: 62 For the attention of Revision No. Date of issue Revision 0 2019-06-11 Summary:
Airbus Helicopters was informed that during a pre-flight check one of the compass attachment bolts was found to be broken.
Corrosion beyond the permitted levels was observed on the broken bolt, and the other bolt was twisted Thus, this ALERT SERVICE BULLETIN consists in:
- making sure that the bolts of the rotating and non-rotating scissors do not rotate,
- if necessary, replacing the attachment bolts).
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2019-06-11 Page 1/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts EC120 version B helicopters equipped with a scissors assembly P/N C623A21101 at any point.
1.A.2. Non-installed equipment or parts Scissors assembly P/N C623A21101 at any point.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Airbus Helicopters was informed that during a pre-flight check one of the compass attachment bolts was found to be broken.
Corrosion beyond the permitted levels was observed on the broken bolt, and the other bolt was twisted.
Technical analysis of the event concluded that undetected seizure could block the pivot link of the scissors and cause a bolt to break.
Airbus Helicopters makes it mandatory to inspect the attachment bolts of the rotating and stationary scissors.
1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:
- making sure that the bolts of the rotating and non-rotating scissors do not rotate,
- if necessary, replacing the attachment bolts).
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3.B.2.a. of this ALERT SERVICE BULLETIN before the helicopter is delivered.
Then, During every "15 FH // 7 D check", comply with paragraph 3.B.2. except for paragraph 3.B.2.a.
Non-installed equipment or parts:
Not applicable.
Revision 0 2019-06-11 Page 2/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019
1.E.2. Compliance in service The work must be performed on the helicopter by the operator.
Helicopters/installed equipment or parts:
Within 50 flying hours following receipt of this ALERT SERVICE BULLETIN, comply with paragraph 3.B.2.a.
Then, During every "15 FH // 7 D check", comply with paragraph 3.B.2. except for paragraph 3.B.2.a.
Non-installed equipment or parts:
During installation on the helicopter, comply with paragraph 3.B.2.a.
1.F. APPROVAL Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on June 05, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:
Qualifications:
- 1 Mechanical Technician,
- 1 Pilot appropriately trained and certified, in compliance with the local regulations in force.
anguinded Man hours. The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter Estimated Man-hours:
- approximately 5 minutes to apply the red line,
- approximately 5 minutes for the inspection,
- if necessary, approximately 4 hours for the detailed inspections and replacement of the bolts, for the Mechanical Technician.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.
The estimated helicopter downtime is:
- Half a day if the bolts need to be replaced Revision 0 2019-06-11 Page 3/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019
1.H. WEIGHT AND BALANCE Not applicable.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.
AMM: 62-00-00,3-1: General Safety Instructions - Main Rotor AMM: 62-00-00,6-2: Checks after Maintenance Work - Main Rotor AMM: 62-32-00,4-1: Removal/Installation - Flared housing / Swashplates / Hub Couplings AMM: 62-32-00.6-1: Detailed Check - "Diapason" Scissors Link AMM: 62-32-00,6-2: Detailed check - Scissors link AMM: 62-32-00,6-3: Detailed check - Scissors link bush AMM: 62-32-00,6-7: Check - Hard spot on articulation of the scissors links AMM: 71-00-00,3-1: General Safety Instructions - Power Plant AMM: 71-10-00,4-1: Removal / Installation - Upper cowlings MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2019-06-11 Page 4/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For any information on the price of modification kits and/or components or for assistance, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.
Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specity the mode of transport, the destination and the serial numbers of the helicopters to be modified.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:
Old Key Word Qty New P/N Item P/N → Instruction Bolt AR DHS411-101.2118 1 DHS411-101.2118 Discard Revision 0 2019-06-11 Page 5/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019 Consumables to be ordered separately:
As per Work Cards and/or Tasks specified in this ALERT SERVICE BULLETIN.
The consumables can be ordered separately from BDSI.
Website: https://www.boeingdistribution.com Telephone: +1.305.925.2600 Fax: +1.305.507.7191 AOG: +1.305.471.8888 AOG email: AOGdesk@Boeingdistribution.com Special tools:
As per Work Cards and/or Tasks specified in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Revision 0 2019-06-11 Page 6/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- As per Task 62-00-00,3-1 (AMM), read and comply with the general mechanical instructions.
- As per Task 71-00-00,3-1 (AMM), read and comply with the general power plant installation instructions.
- As per Work Card 20-07-03-406 (MTC), read and comply with the instructions applicable when working on an aircraft electrical circuit and power generating systems.
3.B. WORK STEPS The procedure for only one scissors is described. Apply the same procedure on the other scissors.
3.B.1. Preliminary steps
- Install appropriate access equipment.
- Disconnect all electrical power supplies.
- Turn the main rotor blades to enable adequate access to the working area above the engine.
- If necessary, remove the engine cowling as per Task 71-10-00,4-1 (AMM).
3.B.2. Procedure (Figure 1)
CAUTION
TAKE ALL NECESSARY PRECAUTIONS TO
PREVENT FOREIGN OBJECTS FROM ENTERING
THE ROTOR MAST SHAFT DURING THE ENTIRE OPERATION.
CAUTION
DO NOT PRESSURIZE THE HYDRAULIC CIRCUIT
AND DO NOT ACTIVATE THE FLIGHT CONTROLS DURING THE ENTIRE TASK.
3.B.2.a. Application of the red line Make the T1 and T2 lines with red paint on the scissors bolts as indicated in Figure 1.
Revision 0 2019-06-11 Page 719 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019
3.B.2.b. Inspection
- If the lines T1 and T2 are aligned:
. resume flights.
- If the lines T1 and T2 are not aligned:
. perform a detailed inspection, on a workbench, of:
.. the delta-shaped scissors link (c) as per Task 62-32-00,6-1 (AMM), .. the scissors link (d) as per Task 62-32-00,6-2 (AMM), .. the bush (e) of the scissors link as per Task 62-32-00,6-3 (AMM), . replace the bolts) (a):
NOTE In case of doubt or misalignment, contact Airbus Helicopters before replacing the bolts:
- Fax: +33 (0)4.42.85.99.66.
- E-mail: support.technical-dyncomp.ah@airbus.com .. discard the bolts) (a).
.. install the scissors (b) using the bolts) (1) as per Task 62-32-00,4-1 (AMM).
.. check for hard points on the scissors link hinge (b) as per Task 62-32-00,6-7 (AMM).
clean the existing T1 and T2 red lines, . comply with paragraph 3.B.2.a.
3.B.3. Final steps
- If the engine cowling was removed, install it as per Task 71-10-00,4-1 (AMM).
- If the bolts were replaced, perform the checks after intervention as per Task 62-00-00,6-2 (AMM).
- Clean and repair the work areas and the helicopter as per Work Card 20-07-03-408 (MTC).
- Connect all electrical power sources again.
- Clear the access equipment.
- Set the helicopter into flight configuration.
3.C. RECORD OF COMPLIANCE Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the MRH (Main Rotor Hub) Log Card (FM).
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2019-06-11 Page 8/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS HELICOPTERS ASB No. EC120-05A019 T2 a T1 T2 T2
• T1 T2 Return to paragraph 3.B.2.
Figure 1 Revision 0 2019-06-11 Page 9/9 This document is available on the internet: www.airbushelicopters.com/techpub