Service bulletin · Airbus Helicopters

Airbus Helicopters ASB No. EC130-05A033 Rev 0Airbus Helicopters ASB No. EC130-05A033 Rev 0 · 43 pages · 2.4 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0145, the docket of AD 2021-10-25. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0145 (document 0004) · AD 2021-10-25

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC130-05A033
Latest revision known
EC130-05A033, Revision 1, dated February 9, 2021

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Also cited in 1 proposed AD.

Text · 43OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0145, the docket of AD 2021-10-25. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '19a95755f1d5286c8b48bea7dbd02afce0890c7e5c6976bba973960f29cafa77'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033 Civil versions: B4, T2

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE TIME LIMITS - MAINTENANCE CHECKS - Tail rotor Inspection of the tail rotor blades ATA: 64 For the attention of Revision No. Date of issue Revision 0 2020-08-10 Summary:

The purpose of this ALERT SERVICE BULLETIN is to perform a crack inspection and a dimensional check for each Tail Rotor Blade (TRB).

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

ASB EC130-05A033 Revision 0 2020-08-10 Page 1/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts EC130 helicopters equipped with TRBS MP/N 350A33-3002-02, 350A33-3002-03, 350A33-3002-04, 350A33-3002-05.

NOTE 1 TRBS MP/N 350A33-3004-xx, are not concerned by this ALERT SERVICE BULLETIN.

NOTE 2 Refer to the Log Cards (FM) to identify the current modification status of the helicopter. Machined TRBs MP/N 350A33-3004-xx, can also be identified visually as per IN No. 2985-1-64.

1.A.2. Non-installed equipment or parts TRBS MP/N 350A33-3002-02, 350A33-3002-03, 350A33-3002-04, 350A33-3002-05.

1.B. ASSOCIATED REQUIREMENTS On receipt of Revision 0 of this ALERT SERVICE BULLETIN, make sure that Task 64-21-00,6-21 of AMM is updated with the date code 2020.07.17 or later.

CAUTION

ON RECEIPT OF REVISION O OF THIS ALERT

SERVICE BULLETIN, EVERY COMPLIANCE WITH TASK 64-21-00,6-21 OF THE AMM MUST BE

PERFORMED AS PER THE TASK UPDATED WITH THE DATE CODE 2020.07.17 OR LATER.

Revision 0 2020-08-10 Page 2/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033

1.C. REASON An accident occurred on EC130 B4 in which the pilot reported sudden appearance of vibration followed by the loss of Tail Rotor control. An emergency landing was performed.

Initial investigation has shown that one TRB was broken and three other TRBs had a small crack. All these four cracks have been identified as progressive fatigue crack initiated from the water draining hole area, on the trailing edge of the blade root.

The accident investigation is continuing and the root cause of the broken blade and the 3 cracked blades is not known at this stage.

The laboratory examination has also evidenced some deviation from the original design geometry in the drain hole area which are under analysis.

Consequently this ALERT SERVICE BULLETIN requests to inspect the affected parts at the drain hole section, establishes criteria for replacement and remind the use of the last Work Card update for the limit rework procedures.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- applying the following flowchart:

Identify the Flight hours (FH) of each affected TRB.

The TRB has Yes less than No 1,500 FH since new Perform a crack inspection Perform a crack inspection before TRB TSN reaches within 50 FH from ASB 1,550 FH or within 12 months issuance.

from ASB issuance.

Perform a crack inspection Perform a dimensional check every 20 FH until a before TRB TSN reaches dimensional check, to be 1,570 FH or within 12 months performed within 165 FH or from ASB issuance. 12 months from ASB issuance.

Revision 0 2020-08-10 Page 3/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033

- applying different measures depending of the result of the crack inspection and the dimensional check:

. the TRBS may have to be replaced immediately in case of crack detection or depending on the dimensional check result, . or the TRBs may be maintained in service with a recurrent 20 FH crack inspection before replacement within 1,000FH or 24 months (without exceeding the Service Life Limit of the TRB), . or the TRBs may be maintained serviceable without further check.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

1.E.2. Compliance in service The work must be performed on the helicopter by the operator.

Helicopters/installed equipment or parts:

Comply with flowchart below:

Upon receipt of the Revision 0 of this ALERT SERVICE BULLETIN identify the Flight hours (FH) of each affected TRB.

The TRB has Apply flowchart 1 Yes less than 1,500 FH No Apply flowchart 2.

since new?

Revision 0 2020-08-10 Page 4/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033 Flowchart 1 Comply with paragraphs 3.B.1., 3.B.2. and 3.B.5.

before TRB TSN reaches 1,550 FH or within 12 months (the first limit reached is applicable) from receipt of the Revision 0 of this ALERT SERVICE BULLETIN.

The TRB is Yes Comply with cracked? paragraph 3.B.4.

No Comply with paragraph 3.B.3. before TRB TSN reaches 1,570 FH or within 12 months from receipt of the Revision 0 of this ALERT SERVICE

BULLETIN Apply flowchart 3.

Revision 0 2020-08-10 Page 5/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033 Flowchart 2 Comply with paragraphs

3.B.1. and 3.B.2. within 50 FH from receipt of the Revision 0 of this ALERT SERVICE BULLETIN.

Comply with Yes The TRB is paragraph 3.B.4. cracked?

No The TRB has accumulated more than Yes 165 FH or 12 months (the first limit reached is applicable) since receipt of the Revision 0 of this

ALERT SERVICE BULLETIN?

No OR Comply with paragraphs 3.B.1., 3.B.2.

Comply with paragraph and 3.B.5. within 20 FH following the З.В.З. last compliance of the paragraph 3.B.2.

Apply flowchart 3.

Revision 0 2020-08-10 Page 6/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033 Flowchart 3 The TRB is category No A?

Yes is category The TRB No The TRB is B? category C.

Compy with paragraph 3.B.5.

The TRB is not anymore concerned by this ALERT SERVICE BULLETIN. Yes Comply with paragraphs 3.B. 1.,

3.B.2. and 3.B.5. within 20 FH tollowing the last compliance of the paragraph 3.B.2.

The TRB is Yes Comply with cracked? paragraph 3.B.4.

No The TRB has accumulated the Revision 0 of this ASB No without exceeding the OR Service Life Limit of the blade or 24 months since the receipt of the Revision 0 of this ASB (the first limit reached is applicable).

Comply with paragraph 3.B.4.

Yes Revision 0 2020-08-10 Page 7/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033 Non-installed equipment or parts:

The work must be performed on the non-installed equipment or parts by the operator.

Comply with paragraphs 3.B.2. to 3.B.4. except paragraphs 3.B.4.a. and 3.B.4.b. within 24 months from receipt of Revision 0 of this ALERT SERVICE BULLETIN or before installation on the helicopter (the first limit reached is applicable).

1.F. APPROVAL Approval of modifications:

Not applicable.

OVED Approval of this document:

The technical information contained in this Service Bulletin Revision 0 was approved on August 07, 2020 under the authority of EASA Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

1.G. MANPOWER

• For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualification:

Qualification: - 1 Mechanical Technician for the crack inspection for compliance with paragraph 3.B.2.,

- 1 Mechanical Technician for the dimensional check for compliance with paragraph 3.B.3.a.,

- 2 Mechanical Technicians for the dimensional check for compliance with paragraphs 3.B.3.b.

and 3.B.3.c.

The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours: - 1 hour for one Mechanical Technician for compliance with paragraph 3.B.2.

- 3 hours for two Mechanical Technicians for compliance with paragraphs 3.B. 1. to

3.B.5. except 3.B.4.

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at 1/2 day (excluding the time for replacing the TRBS) to check the TRBS.

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

Revision 0 2020-08-10 Page 8/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.

Standard Practices Manual (MTC):

MTC: 20-04-01-102: Use of cleaning products on individual parts and on helicopters - Cleaning MTC: 20-04-01-402: Cleaning of removed individual parts with liquid solvents - Cleaning MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-02-09-101: Crack detection through dye-penetrant inspection: General - Crack detection Aircraft Maintenance Manual (AMM):

AMM: 24-00-00,3-1: General Safety Instructions - Electrical Power Supply System - Electrical power AMM: 60-00-00,3-2: General Safety Instructions - Critical Parts - General - Mechanics Systems AMM: 64-21-00,4-3: Disassembly - Tail Rotor Hub - Tail Rotor Hub AMM: 64-21-00,4-4: Assembly - Tail Rotor Hub - Tail Rotor Hub AMM: 64-21-00,6-21: Visual Inspection Criteria - Tail Rotor Blade Assembly - Tail Rotor Hub - Inspection Check Information Notice (IN):

IN: 2985-1-64: TAIL ROTOR - Entry into service of a new tail rotor blade definition (POST MOD 07-6610) IN: 3447-1-00: GENERAL - Introduction of the digital Service Bulletin reporting service R-TEX

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2020-08-10 Page 9/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For any information on the price of modification kits and/or components, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.

Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to modify.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2020-08-10 Page 10/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:

Key Word Qty New P/N Item Old P/N →→ Instruction Tail Rotor Blade ALD 350A33-3002-02 1 (TRB) Ou Tail Rotor Blade ALD 350A33-3002-03 2 (TRB) Ou Tail Rotor Blade (TRB) ALD 350A33-3002-04 Ou 350A33-3002-02 350A33-3002-03 or Discard if category B or C.

Tail Rotor Blade (TRB) ALD 350A33-3002-05 4 350A33-3002-04 or Return as per Paragraph Ou 350A33-3002-05 or If cracked 2.D Tail Rotor Blade ALD 350A33-3004-00 5 (TRB) Ou Tail Rotor Blade ALD 350A33-3004-01 6 (TRB) Revision 0 2020-08-10 Page 11/43 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC130-05A033 Consumables to be ordered separately:

As per Work Cards and Task indicated in this ALERT SERVICE BULLETIN.

Consumables can be ordered separately from the following companies:

Aviatec Global Aviation Website: www.aviatec.net Telephone: +33 1.34.46.45.24 or +49 4193.8803.630 Fax: +33 1.34.46.45.26 or +49 4193.8803.699 AOG: +49 4193.8803.660 AOG email: aog@aviatec.aero BDSI Website: www.boeingdistribution.com Telephone: +1.305.925.2600 Fax: +1.305.507.7191 AOG: +1.305.471.8888 AOG email: AOGdesk@Boeingdistribution.com Gaches Chimie Website: www.gaches.com Telephone: +33 5.61.31.64.45 Fax: +33 5.61.40.98.63 AOG email: marketplace@gaches.com Special tools:

As per Work Cards and Task indicated in this ALERT SERVICE BULLETIN and list below:

Key Word Qty Tool P/N or equivalent Item Smartphone Commercial P/N Digital camera Commercial P/N Red color marker Commercial P/N Computer Commercial P/N ww Steel ruler Commercial P/N VV Light Commercial P/N uu

2.D. EQUIPMENT OR PARTS TO BE RETURNED Return the cracked TRBs to the following address:

Airbus Helicopters Aéroport Marseille Provence RETEX Factory - Gare d'arrivée MAH09MGA2 - B1- LES BORIES

SOUS-SOL - ARRIVEE 13 725 Marignane CEDEX France Revision 0 2020-08-10 Page 12/43 This document is available on the Internet: www.airbushelicopters.com/techpub