Service bulletin · Airbus Helicopters

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

No revision namedAirbus Helicopters Alert Service Bulletin EC130-05A040 · 22 pages · 460 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-5032, the docket of AD 2026-12-03. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2025-5032 (document 0004) · AD 2026-12-03

No revision namedAirbus Helicopters Alert Service Bulletin EC130-05A040 Rev 0 · 22 pages · 1.2 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2419, the docket of AD 2025-06-04. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-2419 (document 0004) · AD 2025-06-04

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC130-05A040

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

Text · 22OCR

No revision named, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-5032, the docket of AD 2026-12-03. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '94b905b4b2730b2a80ed0ac47206718f0181fd78f8b128f8e75c0070e9e9e13a'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040 Civil version(s): B4, T2

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE TIME LIMITS - MAINTENANCE CHECKS - Main rotor drive Check of the Main Gear Box (MGB) bevel wheel ATA: 63 For the attention of Revision No. Date of issue Revision 0 2023-01-25 Summary:

The purpose of this ALERT SERVICE BULLETIN is to improve the detection of particles in the MGB by introduction of a periodic visual inspection of the bevel wheel or in case of particles detection during scheduled check of the Magnetic Plugs (MP) of the MGB.

Compliance:

It is mandatory to comply with this ALERT SERVICE BULLETIN.

Revision 0 2023-01-25 Page 1/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters EC130 version T2 and B4 that have MGB planet gears bearing MP/N 350A32-1082-03 or MP/N 350A32-1114-00.

NOTE Refer to the Log Card (FM) of the MGB to identify the current notification status of the equipment.

1.A.2. Non-installed equipment or parts MGB that have planet gears bearing MP/N 350A32-1082-03 or MP/N 350A32-1114-00.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Airbus Helicopters is proactively reassessing its maintenance policy with respect to particle detection in MGBs for its entire product range. These analyses have been expanded to include the MGB of the Ecureuil family.

As a precautionary measure and to enhance safety of the product, the purpose of this ALERT SERVICE BULLETIN is to improve the detection of particles in the MGB by introduction of a periodic visual inspection of the bevel wheel or in case of particles detection during scheduled check of the Magnetic Plugs (MP) of the MGB.

1.D. DESCRIPTION The ALERT SERVICE BULLETIN includes the work steps that follow:

- Do a visual inspection of the MGB bevel wheel with a boroscope.

- Make sure that there are no particles on the MGB bevel wheel.

- If necessary, collect the particles on the MGB bevel wheel with a vacuum pump.

- Analyze the results, refer to the flow chart.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

Revision 0 2023-01-25 Page 2/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

1.E.2. Compliance in service Helicopters/installed equipment or parts:

The operator must do the work on the helicopter.

Comply with paragraph 3. of this ALERT SERVICE BULLETIN. Refer to Table No. 1:

Table No.1 Helicopter configuration Compliance time Periodicity MGB that have planet gears bearing MP/N 350A32-1082-03 or Not more than 660 Flight Hours (FH) after MP/N 350A32-1114-00 you received this installed on helicopters ALERT SERVICE BULLETIN. (Refer to the issue date on the page footer) or in case of MGB that have planet gears bearing MP/N 350A32-1082-03 EC130 version B4 particles characterized as scale, flake or splinter found on a MGB magnetic plug Every 660 FH during compliance with installed on helicopters EC130 version T2 Task 60-00-00,6-2A (AMM).

Not more than 330 FH after you received MGB that have planet gears bearing this ALERT SERVICE BULLETIN. (Refer to the issue date on the page footer) or in MP/N 350A32-1114-00 installed on helicopters flake or splinter found on a MGB magnetic case of particles characterized as scale, Every 330 FH EC130 version T2 plug during compliance with Task 60-00-00,6-2A (AMM).

Non-installed equipment or parts:

For non-installed MGB or when you install a MGB on helicopter:

- If the MGB is more or equal to 330 FH since the last Time Since Overhaul (TSO) and since Time since New (TSN) and since last boroscopic inspection of the bevel wheel:

• Comply with paragraph 3. before installation of the MGB on the helicopter.

- If the MGB is less than 330 FH since the last Time Since Overhaul (TSO) or since Time since New (TSN) or since last boroscopic inspection of the bevel wheel:

. No action is required immediately.

. After you install the MGB on the helicopter:

.. Comply with paragraph 3. before you reach 330 FH.

.. Refer to table No.1 for periodicity (installed equipment or parts).

1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.

Revision 0 2023-01-25 Page 3/22 Ce document est disponible sur internet : www.airbushe elicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

1.G. MANPOWER ' Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualifications:

Visual inspection of the MGB bevel wheel (paragraph 3.B.2.):

Qualification: 2 Mechanical Technicians or 1 Mechanical Technician (for the inspection) and 1 crew member (to turn tail rotor).

Analysis of the results (paragraph 3.B.4.):

Qualification: 1 Mechanical Technician The man-hours are an estimate given for information only and for a standard helicopter configuration.

Visual inspection of the MGB bevel wheel (paragraph 3.B.2.):

Estimated Man-hours: an half hour for two Mechanical Technicians.

Collect of the particles (paragraph 3.B.3.):

Estimated Man-hours: one hour for two Mechanical Technicians.

Analysis of the results (paragraph 3.B.4.):

Estimated Man-hours: one hour for one Mechanical Technician.

The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.

The estimate of the helicopter downtime is four hours (except time for metallurgical analysis).

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2023-01-25 Page 4/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

1.K. REFERENCES Aircraft Maintenance Manual (AMM):

AMM: 05-50-00,6-1: Procedure in the Event of Detection of Chips and / or Illumination of "MGB P" and / or "MGB TEMP" Warning Lights - TGB / MGB - Unscheduled Inspections AMM: 60-00-00,6-2A: Check - Chips detector - General - Mechanical Systems Standard Practices Manual (MTC):

MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-01-601: Monitoring of lubricating oil contamination on mechanical assemblies equipped with magnetic plugs - Periodical monitoring of lubricating oil checking elements Information Notices (IN):

IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2023-01-25 Page 5/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Consumables to be ordered separately:

Refer to the Tasks given in this ALERT SERVICE BULLETIN and list below:

Key Word Qty P/N Item Cleaning agent 1 L Commercial P/N CM 296 1 Oil 0.3 L ECS2199.10 CM 125 2 You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).

If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Revision 0 2023-01-25 Page 6/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040 Special tools:

Refer to the Tasks given in this ALERT SERVICE BULLETIN and the list that follows:

Key Word Qty Tool P/N or equivalent Item 1 Olympus Iplex rx/rt type iv9420RX Boroscope or equivalent Magnet Commercial P/N 8L pneumatic oil extractor vacuum 1 GEPCO 8L Air Powered Oil pump Removing & Filling Tool for Cars transmissions ref. AT0754 or equivalent Tank Vacuum pump sub-assembly xx1 Top Vacuum pump sub-assembly xx2 Flexible hose Vacuum pump sub-assembly xx3 Semi rigid hose Vacuum pump sub-assembly xx4 Pistol grip Vacuum pump sub-assembly xx5 Connection Vacuum pump sub-assembly xx6 Safety valve Vacuum pump sub-assembly xx7 Connection Vacuum pump sub-assembly xx8 Connection Vacuum pump sub-assembly xx9 Connection Vacuum pump sub-assembly xx10 Syringe 1 Commercial P/N ww Container of light color 1 Commercial P/N VV Transparent adhesive tape and 1 KA0225-3 uu transparent support sheet NOTE If another vacuum pump is used as an alternative to vacuum pump (xx), adapt the procedure of the paragraph 3.B.3. of this ALERT SERVICE BULLETIN in accordance with the other pump.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2023-01-25 Page 7/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Not applicable.

3.B. WORK STEPS

CAUTION

MAKE SURE THAT YOU PREVENT ALL POSSIBLE FOREIGN OBJECT DEBRIS (FOD).

3.B.1. Preliminary steps

- Disconnect all the electrical power supplies refer to the Work Card 20-07-03-406 (MTC).

- Install the access equipment.

- Remove and/or open all cowlings, panels, doors and all equipment items to enable adequate access to the various work areas.

3.B.2. Visual inspection of the bevel wheel (Figure 1 and Figure 2)

CAUTION

COMPLY WITH THIS PARAGRAPH AT ROOM TEMPERATURE.

- Open the filler plug (a1) of the MGB (a).

- Remove the strainer (a2).

- Position the boroscope (zz) above the bevel wheel (a3) without contact with oil.

a2 — а3 ZZ аб a4 Figure 2 a5 Figure 1 Revision 0 2023-01-25 Page 8/22 Ce document est disponible sur internet : www.airbush licopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

CAUTION

TURN THE TAIL ROTOR SLOWLY TO DO THE VISUAL INSPECTION WITH THE BOROSCOPE (zz).

- If the MGB is installed on the helicopter:

• Turn the main rotor (c) (not shown) clockwise slowly 2 times minimum with the tail rotor (b) (not shown).

- If the MGB is not installed on the helicopter or when you install a MGB on helicopter:

. Turn the MGB engine input flange (d) (not shown) clockwise slowly 12 times minimum with the hand.

NOTE 1 Do the visual inspection with 2 mechanical technicians (or 1 mechanical technician and 1 crew member), one to inspect with the boroscope (zz) and one to turn the tail rotor (b) or MGB engine input flange (d).

NOTE 2 If the bottom of the radius (a6) of the bevel wheel (a3) and/or head screws (a4) (see Figure 2) are not clearly visible, contact Airbus Helicopters for further instructions to the address that follow:

https://airbusworld.helicopters.airbus.com

- Make sure that there is no particle on the bevel wheel (a3) (Figure 3 and Figure 4).

a3 Example of the presence of particles Figure 3 Revision 0 2023-01-25 Page 9/22 Ce document est disponible sur internet : www.airb licopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040 a3 Example of the presence of particles Figure 4

CAUTION

MAKE SURE YOU DO NOT LEAVE ANYTHING INSIDE THE MGB (a).

NOTE 3 Examine precisely the specific area of the radius (a6) under the teeth (a5) of the bevel wheel (a3) (Figure 2).

- If there is no particle on the bevel wheel (a3):

. Remove the boroscope (zz).

. Install the strainer (a2).

. Close the filler plug (a1) of the MGB (a).

. Comply with paragraph 3.B.5.

- If there are particles on the bevel wheel (a3):

. Comply to paragraph 3.B.3.

Revision 0 2023-01-25 Page 10/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040

3.B.3. Collect of the particles on the bevel wheel

CAUTION

COMPLY WITH THIS PARAGRAPH AT ROOM TEMPERATURE.

- Cut the semi rigid hose (xx4) of the vacuum pump (xx) to a length of 400 mm (15.74 in) (Figures 5 and 6).

xx4 xX Figure 5

• Xx4 Figure 6

- Make a 45 degree angle with the semi rigid hose (xx4) of the vacuum pump (xx) (Figure 7).

xx4 Figure 7 Revision 0 2023-01-25 Page 11/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-05A040 xx3 xx4 xx10 xx5 xx9 Figure 8

- To limit the risk of particles blocked in the pistol grip (xx5), disconnect (Figure 8):

. The pistol grip (xx5).

. The connection (xx10).

. The connection (xx9).

- Connect directly the rigid hose (xx4) in the flexible hose (xx3) (Figure 9).

xx4 xx3 Figure 9 Revision 0 2023-01-25 Page 12/22 Ce document est disponible sur internet : www.airbushelicopters.com/techpub/