Service bulletin · Airbus Helicopters

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 1Airbus Helicopters EASB No. EC130-05A042 Rev 1 · 12 pages · 678 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-2396, the docket of AD 2023-25-14. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-2396 (document 0002) · AD 2023-25-14

Airbus Helicopters EASB EC130-05A042 Rev 0Airbus Helicopters EASB EC130-05A042 Rev 0 · 8 pages · 214 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-1664, the docket of AD 2022-27-09. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-1664 (document 0002) · AD 2022-27-09

Manufacturer
Airbus Helicopters
Type
Emergency Alert Service Bulletin
Number
EC130-05A042
Latest revision known
EC130-05A042, Revision 1, dated November 2, 2023

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 2

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 12OCR

Revision 1, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-2396, the docket of AD 2023-25-14. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ed97ed7af633bb53332f914b99fe33a248f29eea9aa440695e671a046ad8db6c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS

EMERGENCY

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE TAIL ROTOR DRIVE - Tail rotor drive shaft Balancing check of the tail rotor drive line ATA: 65 For the attention of AIRCRAFT NUMBER Version(s) CONCERNED Civil Military EC130 05A042 T2 Revision No. Date of issue Revision 0 2022-12-14 Revision 1 2023-11-02 Summary:

The purpose of this ALERT SERVICE BULLETIN is to check vibration level of the tail rotor drive shaft to make sure that it is within the defined limit.

Reason for last Revision:

The purpose of revision 1 is to:

- Make it clearer that it is not permitted to comply with balance correction after balance measurement.

- Tell the operator to do a ground run for a minimum of ten minutes before measuring the vibration levels.

- Decrease the maximum vibration level permitted when you comply with Task 65-11-01,5-1B (AMM).

Compliance:

It is mandatory to comply with this ALERT SERVICE BULLETIN.

Export Control:

US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.

FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR.

Revision 0 2022-12-14 Page 1/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 2OCROpen in PDF

AIRBUS HELICOPTERS

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts EC130 versionT2 helicopters that have a supercritical rear drive system with rotor drive shaft MP/N 350A34-5010-00 and 350A34-5020-00.

NOTE 1 Supercritical rear drive system comes with modification 079809.

1.A.2. Non-installed equipment or parts Not applicable.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Revision 0:

A crack was found on the tailboom of an EC130 T2 during the application of ALERT SERVICE BULLETIN No. 05A039 (Visual inspection of the rear transmission bearing support).

During the previous flight, the pilot reported a humming sound and vibrations in the pedals.

During troubleshooting, a measurement of vibration levels of the tail rotor drive shaft was done and an abnormal increase was found.

Consequently, the purpose of this ALERT SERVICE BULLETIN is to check vibration level of the tail rotor drive shaft to make sure that it is within the defined limit.

Revision 1:

Following review of feedbacks received since publication of revision 0 of this ALERT SERVICE BULLETIN, Airbus Helicopters noticed the differences between Task 65-11-01,5-1A (AMM) (with the STEADY Control tuning equipment) and Task 65-11-01,5-1B (AMM) (with the VIBREX 2000 adjustment equipment) vibration measurement results:

- After analysis it appeared that the differences of installations between the two Tasks of the Aircraft Maintenance Manual (AMM) lead to different readings for an identical unbalance load on the tail drive shaft support.

- The vibration load measures can vary during the first minutes of a ground run and stabilize after 10min.

Also, Airbus helicopters wants to highlight that correction of the tail drive line balancing other than after the replacement of tail rotor drive line parts can interfere with the correct measurement of vibration loads and lead to unexpected damage on the tailboom airframe and tail rotor drive line.

Consequently, the purpose of revision 1 is to:

- Make it clearer that it is not permitted to comply with balance correction after balance measurement.

- Tell the operator to do a ground run for a minimum of ten minutes before measuring the vibration levels.

- Decrease the maximum vibration level permitted when you comply with Task 65-11-01,5-1B (AMM).

Revision 1 of this ALERT SERVICE BULLETIN has an effect on the compliance with revision 0 of this ALERT SERVICE BULLETIN.

Revision 0 2022-12-14 Page 2/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 3OCROpen in PDF

AIRBUS HELICOPTERS

1.D. DESCRIPTION This ALERT SERVICE BULLETIN includes the work steps that follow:

- Measure the vibration level on the tail rotor drive shaft.

- Analyze the results.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

1.E.2.a. For all helicopters upon receipt of revision 1 of this ALERT SERVICE BULLETIN:

It is not permitted to do balance correction of Task 65-11-01,5-1A (AMM) and Task 65-11-01,5-1B (AMM) other than during compliance with paragraph 3.B.2.b. (Replacement of sliding flange and the splined sleeve equipped).

For helicopters which have done balance correction other than during compliance with paragraph 3.B.2.b. contact Airbus Helicopters to the address that follow to get instructions before resuming flight:

https://airbusworld.helicopters.airbus.com Revision 0 2022-12-14 Page 3/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 4OCROpen in PDF

AIRBUS HELICOPTERS

1.E.2.b. If this ALERT SERVICE BULLETIN has never been complied with, then comply with Table No.1:

Table No. 1 Compliance time Task used for Interpretation of Action 1 Recurring check check the results Then, comply with If vibration level is less than 1.4 IPS Comply with paragraph 3.В.3. paragraph 1.E.2. at the latest when you reach 50 FH since the last check If vibration level Comply with paragraphs Vibration level is more than or 3.B.2.b. and 3.B.3. no check equal to 1.4 and later than 30 FH since the complied with less than 1.8 IPS last check.

For helicopters which are 50 FH or more, since new: 65-11-01,5-1A (AMM). Task less than 2.6 IPS equal to 1.8 and If vibration level is more than or later than 15 FH since the Comply with paragraphs 3.B.2.b. and 3.B.3. no last check. the latest when you paragraph 1.E.2. at reach 50 FH since Then, comply with the parts Comply with replacement paragraphs 3.B.1. and If vibration level Comply with paragraphs

3.B.2.a. before you is more than or 3.B.2.b. and 3.B.3. before resume flights. equal to 2.6 IPS you resume flights Then, comply with If vibration level is less than 0.7 Comply with paragraph the latest when you paragraph 1.E.2. at For helicopters which IPS З.В.З. reach 50 FH since are less than 50 FH the last check since new: If vibration level Comply with paragraphs Comply with is more than or 3.B.2. b. and 3.B.3. no reach 50 FH since new. paragraphs 3.B.1. and 3.B.2.a. before you Vibration level check less than 0.9 IPS If vibration level equal to 0.7 and later than 30 FH since the Comply with paragraphs last check.

65-11-01,5-1B complied with (AMM). Task less than 1.3 IPS is more than or equal to 0.9 and later than 15 FH since the 3.B.2. b. and 3.B.3. no last check. the latest when you paragraph 1.E.2. at reach 50 FH since Then, comply with the parts If vibration level Comply with paragraphs replacement is more than or 3.B.2. b. and 3.B.3. before equal to 1.3 IPS you resume flights Revision 0 2022-12-14 Page 4/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 5OCROpen in PDF

AIRBUS HELICOPTERS

1.E.2.c. If you already complied with revision 0 of this ALERT SERVICE BULLETIN with Task 65-11-01,5-1B (AMM) and Vibration level was more than or equal to 0.7 IPS, comply with Table No. 2:

Table No. 2 Compliance time Interpretation of the results Last check Action 1 Recurring check Less than 30 Comply with paragraphs Flight Hours 3.B.1., 3.B.2. b. and 3.B.3.

(FH) since last no later than 30 FH since check the last check.

If vibration level was more than or equal to 0.7 and less than

0.9 IPS at last check More than 30 Comply with paragraphs FH since last 3.B. 1, 3.B.2. b. and 3.B.3.

check before you resume flights.

When you receive Comply with paragraphs Then, comply with revision 1 of this Less than 15 FH 3.B.1., 3.B.2. b. and 3.B.3. paragraph 1.E.2. at ALERT SERVICE since last check no later than 15 FH since the latest when you BULLETIN (refer the last check. reach 50 FH since to the issue date If vibration level was the parts on the page more than or equal replacement footer), to 0.9 and less than

1.3 IPS at last check More than 15 Comply with paragraphs FH since last 3.B.1., 3.B.2. b. and 3.B.3.

check before you resume flights.

If vibration level was Comply with paragraphs more than or equal Not applicable 3.B.1., 3.B.2.b. and 3.B.3.

to 1.3 at last check before you resume flights.

Revision 0 2022-12-14 Page 5/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 6OCROpen in PDF

AIRBUS HELICOPTERS

1.E.2.d. If you already complied with this ALERT SERVICE BULLETIN and you are not concerned by paragraph

1.E.2.b and paragraph 1.E.2.c. comply with Table No. 3:

Table No. 3 Compliance time Task used for check Interpretation of the results Action 1 Recurring check Then, comply with paragraph 1.E.2 If vibration level is Comply with at the latest when less than 1.4 IPS paragraph 3.B.3. you reach 50 FH since the last check.

If vibration level is Comply with more than or equal to paragraphs 3.B.2.b.

Vibration level 1.4 and less than 1.8 and 3.B.3. no later check complied than 30 FH since the IPS Task 65-11-01,5-1A with If vibration level is Comply with last check. Then, comply with paragraph 1.E.2 (AMM). more than or equal to paragraphs 3.B.2.b. at the latest when

1.8 and less than 2.6 IPS than 15 FH since the and 3.B.3. no later you reach 50 FH since the parts last check. replacement If vibration level is Comply with more than or equal to paragraphs 3.B.2.b.

Comply with 2.6 IPS and 3.B.3. before paragraphs 3.B.1. you resume flights and 3.B.2.a. when you reach 50 FH Then, comply with since the last check. If vibration level is Comply with at the latest when paragraph 1.E.2.

less than 0.7 IPS paragraph 3.B.3. you reach 50 FH since the last check.

If vibration level is Comply with Vibration level more than or equal to 0.7 and less than 0.9 paragraphs 3.B.2.b. and 3.B.3. no later check complied than 30 FH since the IPS with last check Task 65-11-01,5-1B (AMM). more than or equal to If vibration level is paragraphs 3.B.2.b. Comply with Then, comply with at the latest when paragraph 1.E.2.

0.9 and less than 1.3 than 15 FH since the and 3.B.3. no later you reach 50 FH IPS since the parts last check.

replacement If vibration level is Comply with more than or equal to paragraphs 3.B.2.b.

1.3 IPS you resume flights and 3.B.3. before Revision 0 2022-12-14 Page 6/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 7OCROpen in PDF

AIRBUS HELICOPTERS NOTE 2 If necessary, for the initial check, a single ferry flight without passengers is allowed to a maintenance location, where the actions required by this ALERT SERVICE BULLETIN can be accomplished.

NOTE 3 The difference between Task 65-11-01,5-1A (AMM) and 65-11-01,5-1B (AMM) is the equipment used to do the vibration measurement.

Non-installed equipment or parts:

Not applicable.

1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.

1.G. MANPOWER Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:

Qualification: 1 Mechanical Technician.

1 Pilot.

The man-hours are an estimate given for information only and for a standard helicopter configuration.

Estimated man-hours: 4 hours for the Mechanical Technician.

10 minutes for the pilot.

The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.

The estimate of the helicopter downtime is 4 hours (except time to replace the sliding flange and the splined sleeve equipped).

1.H. WEIGHT AND BALANCE There is no change in weight and moment.

1.I. POWER CONSUMPTION Not changed.

Revision 0 2022-12-14 Page 7/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 8OCROpen in PDF

AIRBUS HELICOPTERS

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:

Aircraft Maintenance Manual (AMM):

AMM: 65-11-01,4-1: Removal - Front section - Tail rotor drive line POST MOD 079809 AMM: 65-11-01,4-2: Installation - Front section - Tail rotor drive line POST MOD 079809 AMM: 65-11-01,4-3: Removal - Rear section - Tail rotor drive line POST MOD 079809 AMM: 65-11-01,4-4: Installation - Rear section - Tail rotor drive line POST MOD 079809 AMM: 65-11-01,4-5: Disassembly / Assembly - Rear section - Tail rotor drive line POST MOD 079809 AMM: 65-11-01,5-1A: Adjustment - Balancing of the tail rotor drive line (with the STEADY Control tuning equipment) - Tail Drive Line POST MOD 079809 AMM: 65-11-01,5-1B: Adjustment - Balancing of the tail rotor drive shaft (with the VIBREX 2000 adjustment equipment) - Tail Drive Line POST MOD 079809 Standard Practices Manual (MTC):

MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft Information Notice (IN):

IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2022-12-14 Page 8/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 9OCROpen in PDF

AIRBUS HELICOPTERS

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Contact the Sales and Customer Relations Department to know the delivery lead time.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2022-12-14 Page 9/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 10OCROpen in PDF

AIRBUS HELICOPTERS

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:

Key Qty New reference Item Former word reference → Instruction Sliding flange 1 350A34-5035-20 1 350A34-5035-20 Replace if necessary Splined sleeve 350A34-5025-00 2 350A34-5025-00 Replace if equipped necessary Consumables to be ordered separately:

Refer to the Work Cards and Tasks given in this ALERT SERVICE BULLETIN.

You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).

If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Refer to the Work Cards and Tasks given in this ALERT SERVICE BULLETIN.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2022-12-14 Page 10/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 11OCROpen in PDF

AIRBUS HELICOPTERS

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Non applicable.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Disconnect all the electrical power supplies refer to the Work Card 20-07-03-406 (MTC).

- Install the access equipment.

3.B.2. Procedure

3.B.2.a. Check of the vibration level

CAUTION

COMPLIANCE WITH MEASUREMENT PARAGRAPH OF TASK 65-11-01,5-1A (AMM) OR 65-11-01,5-1B (AMM), RECORD THE VIBRATION

LEVEL AND DO NOT APPLY CORRECTION IN ACCORDANCE WITH PARAGRAPH 1.E.2.a.

- Measure the vibration level on the tail rotor drive shaft. Refer to Task 65-11-01,5-1A (AMM) or 65-11-01,5-1B (AMM).Do the ground run with the main rotor at nominal rating with NR at 374 rpm for 10 minutes before measuring the vibration level.

- Make a Technical Event (TE) in the Technical Request Management tool accessible through AirbusWorld Portal: https://airbusworld.helicopters.airbus.com

- Select the Technical Event (TE) business domain: "SB/ASB Feedback".

- Select the Technical Event (TE) request type: "EC130-05A042".

- Write in the Technical Event (TE) topic the key words that follow: "EASB 05A042".

- Send the vibration level, the phase (hour) and FH before compliance with this ALERT SERVICE BULLETIN to Airbus Helicopters.

- Interpret the results as per paragraph 1.E.2.

3.B.2.b. Replacement of the sliding flange and the splined sleeve equipped

- Remove the front section of the tail rotor drive. Refer to Task 65-11-01,4-1 (AMM).

- Remove the rear section of the tail rotor drive. Refer to Task 65-11-01,4-3 (AMM).

- Remove the splined sleeve equipped (b) (not shown) from the rear section. Refer to Task 65-11-01,4-5 (AMM).

- Install a new splined sleeve equipped (2) (not shown) on the rear section. Refer to Task 65-11-01,4-5 (AMM).

- Install the rear section of the tail rotor drive. Refer to Task 65-11-01,4-4 (AMM).

- Remove the sliding flange (a) (not shown) from the front section. Refer to Task 65-11-01,4-1 (AMM).

- Install a new sliding flange (1) (not shown) on the front section. Refer to Task 65-11-01,4-2 (AMM).

- Install the front section of the tail rotor drive. Refer to Task 65-11-01,4-2 (AMM).

Revision 0 2022-12-14 Page 11/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed

Page 12OCROpen in PDF

AIRBUS HELICOPTERS

3.B.3. Final steps

- Do an aspect check on the helicopter after inspection or repair, refer to the Work Card 20-07-03-408 (MTC).

- Connect all the electrical power supplies, refer to the Work Card 20-07-03-406 (MTC).

- Remove the access equipment.

3.C. RECORD OF COMPLIANCE Compliance with this document:

- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

- Record the compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):

QR-Code or hypertext link NOTE recording compliance with ALERT SERVICE BULLETINS in SB Insight tool does not replace the recording in the helicopter documents.

EASB EC130-05A042

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Revision 0 2022-12-14 Page 12/12 Revision 1 2023-11-02 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed