On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 19OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-1090; AD 2014-12-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'ffbb3205721dfb3dae29fc4f8acf244c10a3a6010778b845abc24f688421f557' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'ffbb3205721dfb3dae29fc4f8acf244c10a3a6010778b845abc24f688421f557' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009 Civil version(s): B4
ALERT SERVICE BULLETIN SUBJECT: DOORS - Sliding door Attachment of the sliding door star support Corresponds to MOD 07 3796 For the attention of Revision No. Date of issue Revision 0 2010-03-30 Revision 1 2013-01-25 Summary:
Reinforce the sliding door star support attachment.
Reason for last Revision:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to change Service Bulletin No. 52-009 into ALERT SERVICE BULLETIN No. 52A009, to make mandatory the improvement of the sliding door star support attachment.
Compliance:
EUROCOPTER makes compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2010-03-30 Page 1/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment Helicopters equipped with a sliding door P/N C526S1101051, and:
- pre MOD 07 3796 (reinforcement of the sliding door star support attachment), or
- pre MOD 07 2921 (industrialized sliding door).
NOTE 1 Refer to the aircraft individual inspection record (or RIC AMS) to identify the actual modification status of the aircraft.
NOTE 2 Helicopters on which Service Bulletin No. 52-009 Revision 0 was complied with, are not affected by this ALERT SERVICE BULLETIN Revision 1.
1.A.2. Non-installed equipment Sliding doors (P/N) C526S1101051 and:
- pre MOD 07 3796 (reinforcement of the sliding door star support attachment), or
- pre MOD 07 2921 (industrialized sliding door).
NOTEI Refer to the aircraft individual inspection record (or RIC AMS) to identify the actual modification status of the aircraft.
NOTE 2 Helicopters on which Service Bulletin No. 52-009 Revision 0 was complied with, are not affected by this ALERT SERVICE BULLETIN Revision 1.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
Revision 0 2010-03-30 Page 2/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
1.C. REASON Revision 0:
Avoid paint chips on the sliding door outside skin on external rivets, by reinforcing the star support pin attachment.
Revision 1:
EUROCOPTER has been informed of an incident concerning the star support pin rupture. This part is located on the kinematics of the sliding door locking system.
The star support pin rupture make makes impossible all sliding door operations.
Investigations have revealed that the helicopter affected had not complied with Revision O of this Service Bulletin No 52-009.
The purpose of Revision 1 is to:
- change Service Bulletin No. 52-009 into ALERT SERVICE BULLETIN No. 52A009, to make mandatory embodiment of modification 07 3796 for the sliding door star support attachment,
- add a star pin dye penetrant inspection procedure,
- add removal and installation procedures of a part of the locking system kinematics,
- to make this revision compliant with the new ALERT SERVICE BULLETIN layout.
EUROCOPTER therefore makes mandatory the star pin check using dye penetrant inspection, as well as compliance with the improvement (doubling the star support pin yoke).
Revision 1 of this ALERT SERVICE BULLETIN does not supersede compliance with Revision 0 of the Service Bulletin No 52-009.
1.D. DESCRIPTION The improvement consists in reinforcing the star support pin using a double yoke system, which enables the rod stress to be more efficiently sustained, which thus avoids this pin to brake.
1.E. COMPLIANCE
1.E.1. Compliance at the works Not applicable.
1.E.2. Compliance in service The works must be performed on helicopter by the operator.
Helicopters/Installed equipment:
Comply with Paragraph 3. of this ALERT SERVICE BULLETIN before reaching 165 flying hours without exceeding 2 years, following receipt of this ALERT SERVICE BULLETIN, issued on the date mentioned in page footer.
Non-installed equipment:
Modify stock as per paragraphs 3.A. and 3.B.4. of this ALERT SERVICE BULLETIN, prior to installation on helicopter and without exceeding 2 years.
Revision 0 2010-03-30 Page 3/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
1.F. APPROVAL Approval of modifications:
The information or instructions relate to modification 073796 which was approved on May 16, 2003 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this Service Bulletin No. 52-009 Revision 0 was approved on March 23, 2010 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on January 24, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, EUROCOPTER recommends the following personnel qualifications:
Qualifications: - 2 Mechanical Technicians,
• Times are given for relerence, fra standard configuration. Time for the operations: - 5 hours (approximately) for the removal/installation of the sliding door, - 1 Composite Specialist.
covering and linkage for 2 mechanical technicians,
- 5 hours (approximately) for the replacement of the star support and glass fabric plies for 1 composite specialist.
The estimated helicopter grounding time is one day and a half approximately, excluding curing time of glass fabric ply/plies under vacuum bag and drying of the different products.
1.H. WEIGHT AND BALANCE Weight: 0.06 kg.
Longitudinal moment: 0.143 m.kg Lateral moment: -0.0555 m.kg Vertical moment: -0.134 m.kg
1.I. EFFECT ON ELECTRICAL LOADS Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.
Revision 0 2010-03-30 Page 4/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
1.K. REFERENCES The following documents are necessary for compliance with this ALERT SERVICE BULLETIN:
Standard Practices Manual (MTC):
MTC: 20.01.01.301 : Miscellaneous products used on helicopters - Use of greases MTC: 20.02.04.401 : Riveting - pitch and edge distance MTC: 20.02.04.402 : Installation of rivets for retrofitting and repair MTC: 20.02.04.601 : General riveting acceptance requirements MTC: 20.02.05.401 : Joining - Joining by riveting MTC: 20.02.06.401 : Safetying and locking of assemblies - Safetying plain pins MTC: 20.02.06.404 : Safetying and locking of assemblies - Safetying with cotter pins MTC: 20.02.09.101 : Check for cracks - General principles applicable to dye penetrant inspection procedure MTC: 20.02.09.601 : Check for cracks - Check of structural components and parts by dye penetrant inspection MTC: 20.03.02.406 General rivet replacement principles - CHERRY-MAX rivets A.S.N.A. 0077 and 0078 MTC: 20.03.02.409 General rivet replacement principles - Installation of blind rivets ASN-NSA 1919 and 1921 MTC: 20.03.06.406 Structural repairs - Vacuum bag techniques MTC: 20.04.01.102 Cleaning of parts - Use of standard cleaning products on individual parts and on MTC: 20.04.01.402 Cleaning of parts - Cleaning removed detail parts with liquid solvents MTC: 20.04.04.401 Surface treatment before painting - Surface preparation before painting MTC: 20.04.05.101 General information concerning painting means and touch-up works MTC: 20.04.05.420 Paint and primer application procedure - Use of CA 8620 primer MTC: 20.05.01.101 General sealing procedures - General sealing methods MTC: 20.05.01.102 General sealing procedures - Sealing compound application methods MTC: 20.06.01.101 Bonding with adhesives - General rules for bonding with adhesive MTC: 20.06.01.102 Bonding with adhesives - Bonding methods MTC: 20.06.01.411 Bonding with adhesives - Use of HYSOL EA 9396 adhesive MTC: 20.06.01.418 Bonding with adhesives - Use of EA 9395 adhesive MTC: 20.07.02.201 Safety instructions - Helicopter parked inside a hangar MTC: 20.07.03.408 Technical instructions - General principles applicable for visual cleanliness appearance checks on an aircraft after an inspection or a repair MTC: 20.08.05.103 : General rules applicable in aeronautics - Monitoring of parts in operation, marking and service life customization Aircraft Maintenance Manual (AMM):
AMM: 25-27-00, 4-2 : Covering - Removal / Installation - Door covering AMM: 52-12-00, 4-1 : Removal - Sliding door AMM: 52-12-00, 4-2: Installation - Sliding door
1.L. DOCUMENTS AFFECTED Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Not applicable.
Revision 0 2010-03-30 Page 5/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT For all information concerning the kits and/or components, contact the EUROCOPTER Network Sales and Customer Relations Department.
Order the required quantity from:
EUROCOPTER Etablissement de Marignane Direction Ventes et Relations Client (ECR) 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please always specify the mode of transport, the destination and the serial numbers of the aircraft to be modified.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Kits or components to be ordered for one helicopter or one assembly:
New Former Key Word Qty P/N Item P/N Instruction Kit including: 350A0737960071 Cotter pin 1 EN2367-18020 10 EN2367-18020 Scrap Cotter pin 23310CA010015 11 23310CA010015 Scrap Plate 1 C526A2370201 15 Angle bracket 1 C526A2369201 16 Rivet 2 21215TB3205 18 Blind rivet 4 ASNA0077E406 19 Revision 0 2010-03-30 Page 6/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009 Material to be ordered separately:
New Former Key Word Qty Item P/N P/N Instruction Support AR 677-1-20-511 2 677-1-20-511 Rivet 1 NAS1919C04S03U NAS1919C04S03U Scrap Rivet ASNA0077E403 4 ASNA0077E403 Scrap Glass fabric AR ECS0030-27 6 ECS0030-27 Scrap Dry carbon fabric AR ECS0031-12 13 End fitting AR 677-1-10-514 14 677-1-10-514 Products to be ordered separately:
As per Tasks mentioned in this ALERT SERVICE BULLETIN and list below:
Key Word Qty Product P/N CM Item Adhesive AR ECS6054-1031 6041 1 Adhesive tape AR Scotch 3M 471 or equivalent 783 5 Adhesive compound AR ECS0010.10 7 Primer paint AR ECS2067.20 8 Grease AR DCSEA354 115 9 Grease AR DCSEA395 101 12 Sealant AR ECS2068.10 6240 17 The products can be ordered separately, from INTERTURBINE AVIATION LOGISTICS company.
Website: http://www.interturbine.com Phone: +49.41.91.809.300 AOG: +49.41.91.809.444
2.D. A MATERIAL TO BE RETURNED Not applicable.
Revision 0 2010-03-30 Page 7/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL Read and comply with instructions for use of greases as per MTC Work Card 20.01.01.301.
Read and comply with instructions for riveting as per MTC Work Cards 20.02.04.401 and 20.02.04.402.
Read and comply with general riveting acceptance instructions as per MTC Work Card 20.02.04.601.
Read and comply with general instructions for joining by riveting as per MTC Work Card 20.04.05.401.
Read and comply with instructions for safetying and locking plain pins as per MTC Work Card 20.02.06.401.
Read and comply with instructions for safetying with cotter pins as per MTC Work Card 20.02.06.404.
Read and comply with instructions for cleaning parts as per MTC Work Cards 20.04.01.102 and
20.04.01.402.
Read and comply with general information on painting means and touch-up works as per MTC Work Card 20.04.05.101.
Read and comply with instructions for bonding with adhesives as per MTC Work Cards 20.06.01.101 and
20.06.01.102.
Read and comply with safety instructions for parking an aircraft in a hangar as per MTC Work Card 20.07.02.201.
3.B. OPERATIONAL PROCEDURE
3.B.1. Preliminary steps (Figure 1)
- Park the helicopter in a hangar.
- Clear access to work zones.
- Install suitable access means.
- Remove sliding door (a) (Figure 1) as per AMM Task 52-12-00, 4-1 and install it on a workbench.
- Remove the sliding door (a) skin as per AMM Task 25-27-00, 4-2.
- Protect the covering of sliding door (a) and install it on a workbench.
3.B.2. Reinforcing the sliding door star support attachment (Figures 1 to 6)
3.B.2.a. Disconnecting rods and removing the star (Figure 1)
- Remove and discard cotter pins (e) (Detail A, Figure 1).
- Remove pins (d).
- Disconnect rods (b), (c) and (i) from star (h), and lock them in order to disengage the work zone.
- Remove and scrap cotter pin (f) and washer (g).
- Remove star (h).
3.B.2.b. Visual inspection of upper and lower locking pin control rod end fittings (Figure 1)
- Examine both end fittings (s) (Detail A, Figure 1) and make sure that they are neither twisted nor broken:
. if both end fittings (s) are neither twisted nor broken:
- leave as Is,
- comply with Paragraph 3.B.2.c.
. if at least one of the two end fittings is twisted or broken:
- using a rule, measure and record length (L),
- loosen locknut (r),
- loosen and remove end fitting (s) concerned,
- remove locknut (r),
- scrap end fitting (s),
- clean locknut (r) threading with Methyl-ethyl-ketone (13) in order to remove any trace of thread lock, Revision 0 2010-03-30 Page 8/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
- screw locknut (r) on end fitting (14) threading to length (L),
- screw end fitting (14) until locknut (r) touches the related rod, NOTE 1 End fitting (14) can be screwed in or out a quarter turn maximum to enable free pin (d) fitting into star (h).
- lock the related rod in order to disengage the work zone.
3.B.2.c. Checking the star support pin using dye penetrant inspection (Figures 1 to 4)
- Clean zones X and Y (Detail C, Figure 3).
- Check for cracks on pin (k1) of support (k), on zones X and Y using a dye penetrant inspection as per MTC Work Cards 20.02.09.101 and 20.02.09.601.
• If no cracks are found:
- put star (h) in position (Detail A, Figure1),
- embody modification 07 3796 as per Paragraph 3.B.2.d.
• If there is a crack:
- remove and scrap glass fabric plies (p) (intervention zone E, Figure 4),
- clean contact surfaces between glass fabric plies (p) and sliding door (a) skin,
- remove and scrap rivet (m) (Detail B, Figure 2) and the three rivets (n),
- remove and scrap support (k),
- clean contact surfaces between sliding door (a) skin and support (k),
- interlay adhesive (1) (not shown in the Figure) between sliding door (a) skin and support (2) as per MTC Work Card 20.06.01.418,
- put support (2) in position using a rivet (3) and three rivets (4) as per MTC Work Cards 20.03.02.406 and 20.03.02.409,
- delimit work zone Z (intervention zone E, Figure 4) using adhesive tape (5) (not shown in the Figure),
CAUTION
WHILE GRINDING, DO NOT DAMAGE THE FIRST PLIES OF SLIDING DOOR (a) SKIN IN CARBON FABRIC (DETAIL D, FIGURE 4).
- using abrasive paper (grit size 80 to 240), remove the finish paint and primer paint on work zone Z, up to the carbon fiber,
- cut out three square-shaped glass fabric plies (6) as per intervention zone E (Figure 4), NOTE 2 If the surface of a glass fabric ply (6) enables it, it is possible to cover several rivet heads with only one glass fabric ply (6).
Revision 0 2010-03-30 Page 9/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
• EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009 NOTE 3 When installing to the center a glass fabric ply (6) on several rivet heads (4), it is necessary to leave a distance of at least 20 mm (.79 in.) between rivet head (4) and the square outer edge.
- apply adhesive compound (7) on the glass fabric ply/-ies (6) as per MTC Work Card 20.06.01.411,
- center a glass fabric ply (6) on apparent rivet heads (4),
- cure the glass tabric ply/-ies (6) in a vacuum bag as per MTC Work Card 20.03.06.406,
- carry out a surface treatment before painting as per MTC Work Card 20.04.04.401,
- apply a primer paint layer (8) on work zone Z as per MTC Work Card 20.04.05.420,
- apply a finish paint layer as per the color of sliding door (a) outer skin (Detail D, Figure 4),
- apply grease (9) (Detail C, Figure 3) on Zone X,
- put star (h) in position,
- embody modification 07 3796 as per Paragraph 3.B.2.d.
3.B.2.d. Embodiment of modification 07 3796 - Reinforcing the sliding door star support (Figures 5 and 6)
- Reinforce stringer (q) (Section H-H, Figure 6) by means of three carbon fabric plies (13) soaked with adhesive (7).
NOTE 4 The orientation of carbon fabric plies (13) has no importance whatsoever.
- Put in position plate (15) on support (k) or (2) pin and center it.
- Put in position angle bracket (16) under stringer (q) and put it against plate (15).
- Secure angle bracket (16) and plate (15) assembly.
- Counter-drill two holes dia 3.3 mm (.13 in.) in angle bracket (16), to match plate (15) holes.
- Pin angle bracket (16) and plate (15).
- Counter-drill four holes dia 3.3 mm (.13 in.) in stringer (q), to match angle bracket (16) holes.
- Interlay sealant (17) between angle bracket (16) and plate (15), as per MTC Work Cards 20.05.01.101 and 20.05.01.102.
- Put in position angle bracket (16) on plate (15) by means of two rivets (18) (Detail G, Figure 6).
- By means of four rivets (19) (Section J-J, Figure 6), put in position plate (15) (Section H-H, Figure 6) and angle bracket (16) assembly on stringer (q), as per MTC Work Card 20.03.02.406.
- Put in position cotter pin (10) (Detail A, Figure 1) without locking it.
- Connect rods (b), (c) and (j) to star (h), and secure them by means of pins (d).
- Lock each pin (d) by means of a cotter pin (11).
- Apply grease (12) (Detail B, Figure 2) to zones T, U, V and W.
- Lock star (h) (Detail F, Figure 5) by means of cotter pin (10) (Detail G, Figure 6).
- Mark as per Paragraph 3.C. of this ALERT SERVICE BULLETIN.
Revision 0 2010-03-30 Page 10/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
3.B.3. Final steps (Figure 1)
- Put in position sliding door (a) skin as per AMM Task 25-27-00, 4-2.
- Put in position sliding door (a) as per AMM Task 52-12-00, 4-2.
- Perform operating test of the sliding door as per AMM Task 52-12-00, 6-1.
- Perform aircraft appearance checks as per MTC Work Card 20.07.03.408.
- Remove the access means.
3.B.4. Operational procedure on non-installed equipment
- Retrofit stock of sliding doors as per Paragraph 3.B.2. of this ALERT SERVICE BULLETIN.
3.C. IDENTIFICATION Identification of this document:
Record compliance with this ALERT SERVICE BULLETIN Revision 1 on the helicopter documents.
Identification of modifications on the equipment:
Identify the assembly as per the table below and MTC Work Card 20.08.05.103.
Key Word Former P/N New P/N MOD Marking type Sliding door assembly C526S1101051 C526S1101051 + ASB No. 52A009 R1 07 3796 Indelible ink
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2010-03-30 Page 11/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC130-52A009
PAGE LEFT BLANK INTENTIONALLY Revision 0 2010-03-30 Page 12/19 Revision 1 2013-01-25 This document is available on the Internet: www.eurocopter.com/techpub