On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2016-3343, the docket of AD 2020-25-11. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-7226, the docket of a proposed AD (Federal Register 2026-14886). Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- Type
- Alert Service Bulletin
- Number
- EC130-52A019
- Latest revision known
- EC130-52A019, Revision 01
- Copies
- 2 files of 1 revision
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
Also cited in 1 proposed AD.
Text · 48OCR
Revision 01, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2016-3343, the docket of AD 2020-25-11. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b692bc866333c73fc02473406308ad7f9a7957cdc55e1ed34cbfb43db6579c97' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b692bc866333c73fc02473406308ad7f9a7957cdc55e1ed34cbfb43db6579c97' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB No. EC130-52A019 Civil version: B4
ALERT SERVICE BULLETIN SUBJECT: DOORS Reinforcement of the door locking/unlocking mechanism Corresponds to MOD 074619 For the attention of Revision No. Date of issue Revision 0 2016-04-18 Revision 1 2016-07-12 Summary:
The purpose of this ALERT SERVICE BULLETIN is to reinforce the door locking/unlocking mechanism.
Reason for last revision:
The purpose of this ALERT SERVICE BULLETIN revision 1 is to:
- extend its effectivity,
- clarify the replacement process of the rod ends and the installation process of the reinforcements,
- reformat this document.
Compliance:
Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2016-04-18 Page 1/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters equipped with composite doors, all P/NS except those beginning with 704A (metal doors), PRE MOD 074619. The helicopter S/N: 4495 is not affected by compliance with this ALERT SERVICE BULLETIN.
NOTE 1 Refer to the aircraft individual inspection record (or RIC AMS) to identify the actual modification status of the aircraft.
1.A.2. Non-installed equipment or parts
- Sliding door P/N 350A25-0431-00xx.
- Sliding door mechanism P/N 677-5-20-000 (7050A4521009).
- RH swing door (RH crew door) P/N 350A25-0024-00.
- LH swing door (LH crew door) P/N 350A25-0426-00xx.
- LH swing door mechanism P/N 677-5-40-000 (704A41610078).
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON The purpose of this ALERT SERVICE BULLETIN revision 0 was to reinforce the door locking/unlocking mechanism.
Several incidents on the LH doors (swing and sliding) revealed some weaknesses in the locking/unlocking mechanism.
These mechanisms are subject to loads every time the doors are opened and closed. Such loads may cause the mechanism rupture and locking.
In case of failure, the doors may remain locked, thus preventing their opening or jettisoning.
Consequently, Airous helicopters developed modification o14619 in order to improve the rellability of the door locking/unlocking mechanism by:
- Reinforcing the rotation pin of the swing door linkage star (addition of a doubler),
- Replacing the rod ends which, when broken, prevent door opening and jettisoning, with rod ends made of more resistant material.
The purpose of this ALERT SERVICE BULLETIN revision 1 is to:
- extend its effectivity,
- clarify the replacement process of the rod ends and the installation process of the reinforcements,
- reformat this document.
The compliance of this ALERT SERVICE BULLETIN revision 1 does not supersede the compliance with revision O.
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Revision 0 2016-04-18 Page 2/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbusl elicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:
- Installing a reinforcing bracket riveted to the LH and RH swing door posts.
- Replacing the rod ends which, when broken, prevent opening of the sliding door and LH swing door.
NOTE 2 Compliance with this ASB requires removing the reinforcing bracket of the sliding door POST ASB 52A009.
NOTE 3 Airbus Helicopters issued SB 52-018 (embodiment of the modification 074635: reinforcement of the crew door control Joint compliance of SB 52-018 with this ASB prevents removal of the reinforcing brackets (1) and (2) installed in this ASB and thus simplifies the operational procedure.
1.E. COMPLIANCE The compliance of this ALERT SERVICE BULLETIN revision 1 does not supersede the compliance with revision O.
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service The works must be done by the Operator on the helicopter and on non-installed equipment or parts.
Helicopters/installed equipment or parts:
Comply with paragraphs 3.B. of this ALERT SERVICE BULLETIN within 24 months following receipt of this ALERT SERVICE BULLETIN issued on the date indicated at the foot of the page.
Non-installed equipment or parts:
Modify stocks as required and as per paragraph 3.B.5.
Building up spares stocks for compliance with this ALERT SERVICE BULLETIN is at the Operator's initiative.
Revision 0 2016-04-18 Page 3/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
1.F. APPROVAL Approval of modifications:
The information or instructions relate to modification 074619 which was approved on April 20, 2015 by the EASA for helicopters of civil versions subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN revision O was approved on April 15, 2016 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN revision 1 was approved on June 14, 2016 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:
Qualification: 1 Composite Material Specialist 1 Mechanical Technician 1 Airframe Technician Time for the operations is indicated for reference, for a standard configuration.
Time for the operations: 20 hours approximately.
The estimated helicopter grounding time is three days approximately, excluding curing time of glass fabric ply/plies under vacuum bag and drying time of the different products.
1.H. WEIGHT AND BALANCE The impact of this ALERT SERVICE BULLETIN is negligible.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
Revision 0 2016-04-18 Page 4/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
* AIRBUS HELICOPTERS ASB No. EC130-52A019 1 K. REFERENCES The following documents are necessary for compliance with this ALERT SERVICE BULLETIN:
Standard Practices Manual (MTC):
MTC: 20.02.04.401: Installation of rivets - Pitch and edge distance MTC: 20.02.04.402: Installation of rivets - Retrofitting and repair MTC: 20.02.04.601: General riveting acceptance requirements MTC: 20.02.05.401: Joining by riveting MTC: 20.02.06.101: Safetying assemblies: General MTC: 20.02.06.401: Safetying plain pins MTC: 20.02.06.404: Safetying with cotter pins MTC: 20.02.09.101: Crack detection through dye penetrant inspection: General MTC: 20.02.09.601: Checking structural parts/components using the dye penetrant procedure MTC: 20.03.02.409: Installation of blind rivets ASN-NSA 1919 and 1921 MTC: 20.03.06.406: Structural repairs - Vacuum bag techniques MTC: 20.04.01.402: Cleaning of removed individual parts with liquid solvents MTC: 20.04.04.401: Surface treatment before painting MTC: 20.04.04.409: Touch-up of local protective treatment on stainless steels MTC: 20.04.05.101: General information about painting means and paint touch-ups MTC: 20.04.05.420: Use of surfacer CA 8620 MTC: 20.06.01.101: General rules for bonding with adhesives MTC: 20.06.01.102: Bonding method MTC: 20.06.01.411: Application of HYSOL EA 9396 cement MTC: 20.06.01.418: Bonding with adhesive - Use of EA 9395 adhesive MTC: 20.06.04.306: Application of loads for Polyester or Epoxy resins MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair MTC: 20.08.05.103: Monitoring of parts in operation - marking - service life customization Aircraft Maintenance Manual (AMM):
AMM: 25-27-00, 4-2: Removal/Installation - Door upholstery AMM: 52-11-00, 4-1: Removal/Installation - Crew doors AMM: 52-11-00, 5-2: Adjustment/Test - Crew door AMM: 52-11-00, 6-2: Checking the penetration of the spring-loaded latch on crew and sliding doors AMM: 52-11-00, 6-4: Checking the position and penetration of the locking finger in the cockpit door upper AMM: 52-12-00, 4-1: Removal - Sliding door AMM: 52-12-00, 4-2: Installation - Sliding door AMM: 52-12-00, 5-1: Adjustment/Test - Sliding door AMM: 52-12-00, 6-2: Checking the position and penetration of the locking finger in the sliding door lateral AMM: 60-00-00, 3-1: General safety instructions - Mechanical assemblies
1.L. OTHER AFFECTED PUBLICATIONS The modification shall be incorporated in the Illustrated Parts Catalog (IPC) and Aircraft Maintenance Manual (AMM).
The updated IPC must be ordered by Customer.
The AMM shall be updated during a future revision.
Revision 0 2016-04-18 Page 5/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:
Under this ALERT SERVICE BULLETIN, rod ends PRE and POST MOD are not interchangeable.
Mixability:
Mixability of parts PRE and POST MOD is prohibited.
Revision 0 2016-04-18 Page 6/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Components related to compliance with this ALERT SERVICE BULLETIN will be delivered free of charge by Airbus Helicopters for 24 months following issue of this ALERT SERVICE BULLETIN.
For any information concerning modification kits and/or components or for assistance, contact the Sales and Customer Relations Department.
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
2.C.1. Kits to be ordered for one helicopter or one assembly:
Key Word Qty New P/N Item No. Former P/N Instruction Reinforcement of door locking system 350A07-4619-0072 Reinforcing bracket 1 350A25-2016-20 1 Reinforcing bracket 1 350A25-2017-2001 2 Rod end 2 350A25-2012-00 3 677-1-10-514 discard Rod end 350A25-2013-00 4 677-1-20-513 discard Rod end 350A25-2014-00 5 677-2-10-511 discard Rod end 350A25-2015-00 6 677-2-20-511 discard Cotter pin 10 23310CA010015 7 Rivet 4 NAS1919C04S03U 8 See § 2.C.2.b Cotter pin EN2367-18020 9 Nut 5 22435BC060L 10 Rivet 4 ASNA0077E403 11 1-part reinforcement Rivet 4 ASNA0077E404 12 Variant item 11 Rivet 4 ASNA0077E406 13 2-part reinforcement Revision 0 2016-04-18 Page 7/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicop oters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019 NOTE 3 Compliance with this ASB requires removing the reinforcing bracket of the sliding door POST ASB 52A009.
According to the configuration of the helicopter, the reinforcing bracket POST ASB 52A009 can be in:
- 2 parts (plate (al) and bracket (am)) (Figure 2),
- 1 part (reinforcing bracket (aq)).
NOTE 4 To reinstall reinforcing bracket (aq), use rivets (11) or (12) according to the thickness of the assembly to attach.
2.C.2. Equipment or parts to be ordered separately
2.C.2.a. Components to be ordered in case of the installation of a new swing door star support following a check by dye penetrant inspection (paragraph 3.B.2.b.3. or paragraph 3.B.2.c.3.):
Key Word Qty New PIN Item No. Former PIN Instruction Star support, swing 1 677-1-10-511 21 door Rivet 2 NAS1919C04S04U 22 Rivet 2 NAS1921C04S03U 23 Components to be ordered in case of the installation of the reinforcing brackets of swing doors in case of overlength of the rivet (8) (paragraph 3.B.2.b.6. or paragraph 3.B.2.c.6.):
Key Word Qty New P/N Item No. Former P/N Instruction Rivet 4 NAS1919C04S02U 24 Variant item 8 NOTE S For the installation of the reinforcing brackets (1) and (2), use the rivets (8) or (24) according to the thickness of the assembly to attach.
Revision 0 2016-04-18 Page 8/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
2.C.3. Consumables to be ordered separately As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN and list below:
Key Word Qty Product P/N CM Item No.
Glass fabric AR ECS0030-27 31 Adhesive AR ECS0010.10 32 Grease AR DCSEA395 101 33 Grease AR DCSEA354 115 34 Primer paint AR ECS2067.20 35 Adhesive AR ECS6054-1031 6041 36 The products can be ordered separately, from the INTERTURBINE AVIATION LOGISTICS company.
Website: http://www.interturbine.com Telephone: +49.41.91.809.300 AOG: +49.41.91.809.444
2.C.4. Equipment or parts required for non-installed components
2.C.4.a. Sliding door 350A25-0431-00xx, non-installed:
New Item Former Key Word Qty P/N No. P/N Instruction Rod end 2 350A25-2012-00 3 677-1-10-514 discard Rod end 1 350A25-2013-00 4 677-1-20-513 discard Rod end 1 350A25-2015-00 6 677-2-20-511 discard Cotter pin 4 23310CA010015 7 Cotter pin 1 EN2367-18020 9 Nut 4 22435BC060L 10
2.C.4.b. RH swing door 350A25-0024-00, non-installed:
Key Word Qty New P/N Item No. Former P/N Instruction Reinforcing bracket 1 350A25-2017-2001 2 Rivet NAS1919C04S03U Rivet NAS1919C04S02U 24 Variant item 8 Cotter pin 23310CA010015 7 Cotter pin 1 EN2367-18020 9 NOTE 6 For the installation of the reinforcing bracket (2), use the rivets (8) or (24) according to the thickness of the assembly to attach.
Revision 0 2016-04-18 Page 9/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
2.C.4.c. LH swing door 350A25-0426-00xx, non-installed:
Key Word Qty New P/N Item No. Former P/N Instruction Reinforcing bracket 350A25-2016-20 1 677-2-10-511 Rod end 350A25-2014-00 5 discard Cotter pin 23310CA010015 7 Rivet 2 NAS1919C04S03U 8 Rivet 2 NAS1919C04S02U 24 Variant item 8 Cotter pin 1 EN2367-18020 9 Nut 1 22435BC060L 10 NOTET For the installation of the reinforcing bracket (1), use the rivets (8) or (24) according to the thickness of the assembly to attach.
2.C.4.d. Sliding door mechanism 677-5-20-000, non-installed:
New Item Former Key Word Qty P/N No. P/N Instruction Rod end 2 350A25-2012-00 3 677-1-10-514 discard Rod end 1 350A25-2013-00 4 677-1-20-513 discard Rod end 1 350A25-2015-00 6 677-2-20-511 discard Nut 4 22435BC060L 10
2.C.4.e. LH swing door mechanism 677-5-40-000, non-installed:
Key Word Qty New P/N Item No. Former P/N Instruction Rod end 350A25-2014-00 5 677-2-10-511 discard Nut 22435BC060L 10
2.C.5. Special tools The tooling below is necessary for compliance with this ALERT SERVICE BULLETIN.
Key Word Qty Tooling P/N or equivalent Item No.
Rule Commercial УУ Masking adhesive tape Commercial ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Revision 0 2016-04-18 Page 10/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Read and comply with instructions for installation of rivets as per MTC Work Cards 20.02.04.401,
20.02.04.402, 20.02.04.601, 20.02.05.401 and 20.03.02.409.
- Read and comply with instructions for safetying as per MTC Work Cards 20.02.06.101, 20.02.06.401 and
20.02.06.404.
- Read and comply with instructions on structural repairs by vacuum bag techniques as per MTC Work Card
20.03.06.406.
- Read and comply with instructions concerning cleaning of removed parts as per MTC Work Card
20.04.01.402.
- Read and comply with general instructions on painting means and paint touch-ups as per MTC Work Card
20.04.05.101.
- Read and comply with instructions for bonding with adhesive as per MTC Work Cards 20.06.01.101 and
20.06.01.102.
- Read and comply with instructions for application of HYSOL EA 9396 cement as per MTC Work Card
20.06.01.411.
- Read and comply with instructions for application of loads for Polyester or Epoxy resins as per MTC Work Card 20.06.04.306.
- Read and comply with general mechanical instructions as per AMM Task 60-00-00, 3-1.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Check the integrity of door locking by making sure that each door can be closed and locked correctly. If this is not the case, comply with the following cards according to the area concerned:
. 52-11-00, 6-2 (AMM) to check the penetration of the spring-loaded latch on the crew and sliding doors, . 52-11-00, 6-4 (AMM) to check the position and the penetration of the locking pin in the crew door upper catch, . 52-12-00, 6-2 (AMM) to check the position and the penetration of the locking pin in the sliding door lateral
- Remove the crew doors as per AMM Task 52-11-00, 4-1.
- Remove the sliding door as per AMM Task 52-12-00, 4-1.
- Remove the door upholsteries as per AMM Task 25-27-00, 4-2.
Revision 0 2016-04-18 Page 11/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub
AIRBUS HELICOPTERS ASB No. EC130-52A019
3.B.2. Procedure
3.B.2.a. Sliding door
3.B.2.a. 1. Removal of locking mechanism (Figure 1, Figure 2) NOTE 1 The photos below show a sliding door locking mechanism with a 1-part reinforcing bracket (aq).
aq aq 9 Sliding door locking mechanism POST ASB 52A009 NOTE 2 The reinforcing bracket can also be in 2 parts (plate (al) and bracket (am)) (Figure 2).
- Removal of 1-part reinforcing bracket (bracket (aq)) (Figure 2 DETAIL B and SECTION E-E):
. Remove cotter pin (aj) and washer (k).
• Retain washer (k) and discard cotter pin (aj).
CAUTION DO NOT DAMAGE CARBON FABRIC PLIES (ap) WHEN REMOVING BRACKET (aq).
• Remove and discard rivets (ar) attaching bracket (aq) to stringer (an).
• Remove and retain bracket (aq).
Revision 0 2016-04-18 Page 12/48 Revision 1 2016-07-12 This document is available on the Internet: www.airbushelicopters.com\techpub