Service bulletin · Eurocopter

No revision namedASB_EC130-63A026 Rev 0 · 14 pages · 941 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-4638, the docket of AD 2026-16-01. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2026-4638 (document 0004) · AD 2026-16-01

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Alert Service Bulletin
Number
EC130-63A026

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 14OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2026-4638, the docket of AD 2026-16-01. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '93e370253248a0bd52bffb0bb8070ece4e1b085d7140b08c544f1f6edb066812'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026 Civil version(s): B4, 12

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE MAIN ROTOR DRIVE - Main Gear Box (MGB) engine coupling Check the correct assembly of the MGB engine coupling flange For the attention of Revision No. Date of issue Revision 0 2023-05-31 Summary:

The purpose of this ALERT SERVICE BULLETIN is to check the assembly direction of the flange and to correctly re assemble it if necessary.

Compliance:

It is mandatory to comply with this ALERT SERVICE BULLETIN.

Revision 0 2023-05-31 Page 1/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters EC130 all versions delivered before February 13, 2023 (date of statement of conformity, EASA form 52 or equivalent).

NOTE Helicopters EC130 all versions delivered on February 13, 2023 or after February 13, 2023 are not concerned with this ALERT SERVICE BULLETIN.

1.A.2. Non-installed equipment or parts Not applicable.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Cases of inverted assembly of the Engine Flange on MGB engine coupling have been detected by Airbus Helicopters.

Consequently, the purpose of this ALERT SERVICE BULLETIN is to check the assembly direction of the flange and to correctly re assemble it if necessary.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN includes the work steps that follow:

- Check the assembly of the MGB engine coupling.

- Make an analysis of the results.

- It necessary:

• Remove the MGB engine coupling incorrectly assembled.

. Remove the flange from the MGB engine coupling.

. Install the flange on the MGB engine coupling correctly.

. Install the MGB engine coupling correctly assembled.

. Send back the response form to Airbus Helicopters.

Revision 0 2023-05-31 Page 2/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

The operator must do the work on the helicopter.

Comply with paragraph 3. of this ALERT SERVICE BULLETIN not more than 165 flight hours or 12 months and 36 days (the first limit you get to is applicable) after you received revision 0 of this ALERT SERVICE BULLETIN (refer to the issue date on the page footer).

Non-installed equipment or parts:

Not applicable.

1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.

1.G. MANPOWER Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:

Qualification: 1 Mechanical Technician.

The man-hours are an estimate given for information only and for a standard helicopter configuration.

Estimated Man-hours: 1 hour for the mechanical technician (excluding time to modify the MGB engine coupling).

The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.

The estimate of the helicopter downtime is 1 hour.

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

Revision 0 2023-05-31 Page 3/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:

Aircraft Maintenance Manual (AMM):

AMM: 63-11-00, 4-1: Removal - MGB / Engine Coupling - Engine / MGB Drive line AMM: 63-11-00, 4-2: Installation - MGB / Engine Coupling - Engine / MGB Drive line AMM: 63-11-00, 6-1: Detailed Inspection Criteria - Flexible Coupling - Engine / MGB Drive line AMM: 63-11-00, 6-9: Inspection Criteria - Engine Flange - Engine / MGB Drive line Standard Practices Manual (MTC):

MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions Information Notices (IN):

IN: 2832-1-00: Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical investigation/core unit return IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2023-05-31 Page 4/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Contact the Sales and Customer Relations Department to know the delivery lead time the operator's request.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2023-05-31 Page 5/14 This document is available on the Internet: www. airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:

Former Key Word Qty New reference Item reference → Instruction Flange 1 Flexible coupling 1 Pin A/R Replace, if Screw AIR Refer to Illustrated necessary, with Washer Ø 18 mm A/R Refer to IPC. the same MP/N Washer ø 20 mm AIR Part Catalog (IPC). as that found on Washer flector AIR the helicopter.

Washer A/R Nut AIR 9 Consumables to be ordered separately:

Refer to Work Cards and Tasks given in this ALERT SERVICE BULLETIN.

You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).

If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Refer to the Work Cards and Tasks specified in this ALERT SERVICE BULLETIN and the list below:

Key word Qty Tool reference or equivalent Item Endoscope Commercial ZZ

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2023-05-31 Page 6/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Not applicable.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Disconnect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).

- Install the access equipment.

- Remove and/or open all applicable cowlings, panels, doors and other equipment items to get access to the different work areas.

3.B.2. Procedure

3.B.2.a. Inspection of the flange of the MGB engine coupling

- Position the endoscope (zz) through room access of the engine coupling housing (a) (Figure 1 and Figure 2).

Figure 1

•ZZ Figure 2 Revision 0 2023-05-31 Page 7/14 This document is available on the Internet: www.airb helicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

- Make sure that the flange (b) of MGB engine coupling (c) is correctly assembled with the endoscope (zz) (Figure 3 and Figure 6).

Shoulder (b') with fillet radius Cylindrical shoulder (b") FWD FWD L2

- b'

- b"

INCORRECT ASSEMBLY CORRECT ASSEMBLY (Flange (b) in incorrect position) (Flange (b) in correct position)

SECTION FWD A-A Shoulder (b') with Fillet radius Cylindrical shoulder (b") p-

CORRECT ASSEMBLY (Flange (b) in correct position) Figure 3 NOTE 1 Incorrect assembly can be identified with a check of relative length (L1) of the head (p) of the screw and the length (L2) of the shoulder (b). The head (p) of the screw is two times shorter than the shoulder (b") (Figure 3 and Figure 6).

Revision 0 2023-05-31 Page 8/14 This document is available on the Internet: www.airbu elicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

3.B.2.b. Analysis of the results Shoulder (b') with Fillet radius Engine side MGB side

CORRECT ASSEMBLY (Flange (b) in correct position) Figure 4

- If the flange (b) is correctly assembled (Figure 4 and Figure 6):

. Remove the endoscope (zz) from the room access of the engine coupling housing (a).

. Comply with paragraph 3.B.3.

- If the flange (b) is incorrectly assembled:

. Comply with paragraph 3.B.2.c.

Revision 0 2023-05-31 Page 9/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

3.B.2.c. Removal of the flange incorrectly assembled from the MGB engine coupling (Figure 5)

- Refer to Task 63-11-00, 4-1 (AMM):

• Remove the MGB engine coupling (c) from the helicopter.

. Remove the flange (b) and the flexible coupling (d) from the MGB engine coupling (c).

. The screws (e) . The washers (f), (k) and (m)

• The washers flector (n) . The nuts (h) . The pins (g).

- Do an inspection of the flange (b) of the MGB engine coupling. Refer to Task 63-11-00, 6-9 (AMM).

- Do an inspection of the flexible coupling (d) of the MGB engine coupling. Refer to Task 63-11-00, 6-1 (AMM).

3.B.2.d. Installation of the flange correctly assembled on the MGB engine coupling (Figure 5)

CAUTION

FOR CORRECT INSTALLATION OF THE FLANGE (b) OR (1), THE HEADS OF THE SCREWS (4) MUST BE ON THE CHAMFER SIDE (AREA A). REFER TO DETAIL C.

- Refer to Task 63-11-00, 4-2 (AMM):

. Install the flange (b) or the new flange (1) and the flexible coupling (d) or the new flexible coupling (2) on the MGB engine coupling (c) with:

.. The new screws (4) .. The new washers (5), (6) and (8) .. The new washers flector (7) .. The new nuts (9) .. The new pins (3).

• Install the MGB engine coupling (c) correctly assembled on the helicopter.

- Send the response form to Airbus Helicopters (see Appendix 4.A.).

3.B.3. Final steps

- Do an appearance check on the helicopter after inspection or repair. Refer to the Work Card 20-07-03-408 (MTC).

- Install again or close all cowlings, panels, doors and equipment removed and/or opened during preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).

- Connect all the electrical power supplies. Refer to the Work Card 20-07-03-406 (MTC).

- Remove the access equipment.

- Comply with paragraph 3.C.

Revision 0 2023-05-31 Page 10/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026

3.C. RECORD OF COMPLIANCE Compliance with this document:

- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):

QR code or hypertext link NOTE 2 The recording of compliance with ALERT SERVICE BULLETINS in the SB Insight tool does not replace the recording in the helicopter documents.

ASB EC130-63A026

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Revision 0 2023-05-31 Page 11/14 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS No. EC130-63A026 g n e E 00 Area A Area A Back to paragraphs 3.B.2.c. and 3.B.2.d.

Figure 5 Revision 0 2023-05-31 Page 12/14 This document is available on the Internet: www.airb elicopters.com/techpub/