On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 11OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0293; AD 2021-13-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6fe80577ab22e52769c428b1b66c4541c861e2ea3caf353b6f2d72e971f5a3ec' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6fe80577ab22e52769c428b1b66c4541c861e2ea3caf353b6f2d72e971f5a3ec' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB EC135-67A-031 Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3.
ALERT SERVICE BULLETIN SUBJECT: ROTOR FLIGHT CONTROL - Tail Rotor Controls Retrofit of a Teflon Washer For the attention of Revision No. Date of issue Revision 0 2017-03-30 Summary:
With this Alert Service Bulletin (ASB), Airbus Helicopters Deutschland (AHD) prescribes the retrofit of a teflon washer on the tail rotor controls.
Compliance:
AHD considers that compliance with the instructions contained in this ASB is mandatory.
Revision 0, 2017-03-30 PAGE 1 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031 1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3, all S/N up to 1254 inclusive, except S/N 1235.
The installation of the teflon washer is in serial production from S/N 1255 and up.
Before ASB After ASB Teflon washer
1.A.2 Non-installed equipment and parts Not applicable.
1.B ASSOCIATED REQUIREMENTS Not applicable.
1.C REASON The tail rotor control features a low clearance between the head of the close-tolerance bolt and the sheet of the stringer. In order to ensure a sufficient clearance in case of a loose bearing, this ASB prescribes the retrofit of a teflon washer between the forked end and the bearing.
1.D DESCRIPTION Remove the RH side channel covers. Disconnect the tail rotor control. Reinstall the tail rotor control including the teflon washer. Install the RH side channel covers.
PAGE 2 of 11 Revision 0, 2017-03-30 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031
1.E COMPLIANCE
1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:
The retrofit of the teflon washer on the tail rotor controls must be accomplished
i.a.w. Section 3.B before delivery of the helicopter.
Non-installed equipment and parts:
Not applicable.
1.E.2 Compliance in service Helicopters/installed equipment and parts:
The retrofit of the teflon washer on the tail rotor controls must be accomplished
i.a.w. Section 3.B not later than by March 31, 2018.
Non-installed equipment and parts:
Not applicable.
1.F APPROVAL Approval of modification(s):
The information or instructions contained in this document refer to change no. 4682.
The technical content of this document is approved under the authority of DOA No.
EASA.21J.700.
1.G MANPOWER Qualification Mechanic Electrician Pilot Others Estimated approx. 4 h Man-hours
1.H WEIGHT AND BALANCE Not applicable.
POWER CONSUMPTION Not applicable.
1.J SOFTWARE UPGRADES/UPDATES Not applicable.
1.K REFERENCES AMM EC135 and AMM EC135/635 Revision 0, 2017-03-30 PAGE 3 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031
1.L OTHER AFFECTED PUBLICATIONS Publications to be updated:
The changes to AMM EC135, AMM EC135/635 and IPC EC135, IPC EC635 which are required as a result of this ASB will be incorporated with one of the next revisions.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:
Not applicable.
Mixability:
Not applicable.
PAGE 4 of 11 Revision 0, 2017-03-30 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031 2 MATERIAL INFORMATION
2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Information on price and availability of required material kit SB-135-67A-031-2C will be provided by AHD, Dept. Spares Order Administration on request.
The material kit required will be provided free of cost by AHD only within the time limits that apply for the compliance (Section 1.E). Material that is ordered outside the time limits given in the ASB will be charged according to the ruling prices.
2.B LOGISTIC INFORMATION Not applicable.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT Material kits to be ordered for one helicopter:
Material kit SB-135-67A-031-2C i.a.w. design document L672M2003884.
No. Keyword Qty New P/N Old P/N Rem.
1 Teflon washer 1 L221M1042208 2 Nut castellated MBBN3129-06D MBBN3129-06D 3 Split pin EN2367-10018 EN2367-10018 Remark:
A = AHD does not take back parts with old part numbers.
Consumables to be ordered separately:
Products can be ordered from the INTERTURBINE AVIATION LOGISTICS company. The given CM numbers are i.a.w. the AMM list of consumable materials.
Website: http://www.interturbine.com Phone: +49.41.91.809.300 AOG: +49.41.91.809.444 NOTE Respect the safety data sheet of the manufacturer.
No. Keyword Qty. Specification ** Rem.
(approx.)
1 Corrosion preventive a.n.* 518 paste 2 EP-primer a.n.* 472 Revision 0, 2017-03-30 PAGE 5 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031 NO. Keyword Qty. Specification ** CM Rem.
(approx.)
Hardener
a.n.* 459 (for CM 472) 4 Thinner a.n.* 436 (for CM 472) *a.n. = as needed ** Specification i.a.w. AMM, 01-00-00, 2-1.
2.D MATERIAL TO BE RETURNED Not applicable.
PAGE 6 of 11 Revision 0, 2017-03-30 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031
ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Not applicable.
З.В WORK STEPS
3.B.1 Preliminary steps
1. De-energize the helicopter electrical system i.a.w. AMM, 24-00-00, 2-1.
2. Remove the RH side channel covers i.a.w. AMM, 52-50-00, 4-3.
3.B.2 Disconnection of the tail rotor control
1. Remove the split pin (1, Fig. 1), the castellated nut (2) and the washer (3).
Discard the split pin (1) and the castellated nut (2).
2. Position the bellcrank (7, Fig. 1) and the forked end (4) so that their attachment holes are aligned with the opening in the forward floor (6).
3. Remove the close-tolerance bolt (5, Fig. 1) and disconnect the forked end (4) from the bellcrank (7).
А 4 1 Split pin 2 Castellated nut 3 3 Washer 2 4 Forked end 1 5 Close-tolerance bolt 6 Opening forward floor 7 Bellcrank Disconnection of the tail rotor control Figure 1 Revision 0, 2017-03-30 PAGE 7 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031
3.B.3 Connection of the tail rotor control
1. Clean the close-tolerance bolt (5, Fig. 2) and apply corrosion preventive paste (CM 518) (1) onto the shank of the close-tolerance bolt (5).
2. Position the bellcrank (7, Fig. 2) and the forked end (4) so that their attachment holes are aligned with the opening in the forward floor (6).
3. Position the teflon washer (8, Fig. 2) inside of the forked end (4) and below the bearing of the bellcrank (7).
Install the close-tolerance bolt (5, Fig. 2) through the opening in the forward floor (6) and install the washer (3) and a new castellated nut (2).
5. Apply a torque between 3 Nm and 4 Nm to the castellated nut (2, Fig. 2).
6. Safety the castellated nut (2, Fig. 2) with a new split pin (1).
6 5 3 - 4 Nm 1 1 Split pin EN2367-10018 8 2 Castellated nut MBBN3129-06D 3 Washer 4 Forked end 5 Close-tolerance bolt /1 6 Opening forward floor 7 Bellcrank 8 Teflon washer L221M1042208 Corrosion preventive paste (CM 518).
Connection of the tail rotor control Figure 2 PAGE 8 of 11 Revision 0, 2017-03-30 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031
3.B.4 Functional test Move the pedals through their full travel length. Inspect the clearance between the head of the close-tolerance bolt and the upper stringer (1, Fig. 3) and the clearance between the end of the close-tolerance bolt / castellated nut and the lower stringer _ CAUTION
DO NOT DAMAGE THE BELLCRANK OR FORKED END WHEN BENDING THE SHEET OF THE STRINGER.
1. If the clearance is less then 1.5 mm at the upper stringer (4, Fig. 3), bend the affected sheet at the stringer till a minimum clearance of 1.5 mm is achieved.
2. If necessary, establish the surface of the sheet with EP-primer (CM 472, CM 459, CM 436).
3. If the clearance is less than 1.0 mm at the lower stringer (/½, Fig. 3), contact AHD customer support for further information.
Clearance to upper and lower stringer Figure 3 Revision 0, 2017-03-30 PAGE 9 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031 З.В.5 Final steps
1. Remove all tools and other materials and clean the work area.
2. Install the RH side channel covers i.a.w. AMM, 52-50-00, 4-3.
PAGE 10 of 11 Revision 0, 2017-03-30 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-67A-031 З.С COMPLIANCE CONFIRMATION Compliance with this document:
Confirm accomplishment of this ASB by an entry in the historical record of the helicopter.
3.D OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:
Not applicable.
Maintenance instructions:
Not applicable.
4 APPENDIX Not applicable.
Revision 0, 2017-03-30 PAGE 11 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/