On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 17Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0340; AD 2013-21-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fcf679ba417e1e0b62f5ad3efd9acfd161cfba51778b0bc8a4a4b73d22fbb5e9' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'fcf679ba417e1e0b62f5ad3efd9acfd161cfba51778b0bc8a4a4b73d22fbb5e9' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
EMERGENCY
ALERT SERVICE BULLETIN EC135 EC135-85A-036 SEITE 1 of 5 2009-04-16 REVISION 2, 2010-06-23 Optional Equipment – External Mounted Hoist System – Inspection of the hoist boom for cracks
1. Planning Information A. Effectivity
(1) Helicopters affected: EC135/EC635, all models with optional equipment external mounted hoist system.
(2) Components affected: Hoist boom 44307-500 * or 44307-500-1* or 44301-500* *) For S/N of the affected hoist booms see Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
(3) Spare Parts affected: Hoist boom 44307-500 * or 44307-500-1* or 44301-500* *) For S/N of the affected hoist booms see Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
B. Concurrent Requirements Not applicable.
C. Reason During a preflight check of the external mounted hoist system cracks had been detected on the hoist boom. Therefore, this Emergency Alert Service Bulletin specifies a visual check of the hoist boom.
With Revison 2 of this Emergency Alert Service Bulletin ECD distributes Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company. This Service Bulletin specifies an inspection. If no cracks are detected the hoist boom can be operated without limitations after the accomplishment i.a.w. the Goodrich Service Bulletin 44307-500-03, Rev. 2.
D. Description EFFECTIVITY Before accomplishment of Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
(1) Check hoist boom for cracks.
EFFECTIVITY With Revision 2 of this Emergency Alert Service Bulletin the Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company is distributed.
(2) See Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company attached to this Emergency Alert Service Bulletin.
EMERGENCY
ALERT SERVICE BULLETIN EC135 EC135-85A-036 SEITE 2 of 5 REVISION 2, 2010-06-23 2009-04-16 E. Compliance EFFECTIVITY Before accomplishment of Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
(1) The check of the hoist boom i.a.w. Section 3.A of this Emergency Alert Service Bulletin must be accomplished before every first flight of the day.
(2) Stored hoist booms must be checked i.a.w. Section 3.A of this Emergency Alert Service Bulletin, but not later than before their installation.
(3) If cracks are detected on the hoist boom during a visual check the hoist boom must be removed or replaced before the next flight.
EFFECTIVITY With Revision 2 of this Emergency Alert Service Bulletin an inspection
i.a.w. Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company is specified.
(4) The inspection of the hoist boom i.a.w. Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company must be accomplished within 30 days after receipt of Revision 2 of this Emergency Alert Service Bulletin.
After that, all measures of this Emergency Alert Service Bulletin are no longer applicable.
F. Approval The technical content of this document is approved under the authority of DOA No. EASA.21J.034.
G. Manpower EFFECTIVITY Before Revision 2 of this Emergency Alert Service Bulletin.
(1) Approx. 15 minutes for the visual check of the hoist boom.
EFFECTIVITY With Revison 2 of this Emergency Alert Service Bulletin.
(2) See Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
H. Weight and Balance Not applicable.
I. Electrical Load Data Not applicable.
J. Software Accomplishment Summary Not applicable.
EMERGENCY
ALERT SERVICE BULLETIN EC135 EC135-85A-036 SEITE 3 of 5 2009-04-16 REVISION 2, 2010-06-23 K. References See Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
L. Other publications affected Not applicable.
M. Interchangeability of Parts Not applicable.
2. Material Information A. Material – Price and Availability See Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
B. Support Information Not applicable.
C. Material Necessary for Each Helicopter See Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
D. Reidentified Parts See Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
E. Special Tooling Not applicable.
EMERGENCY
ALERT SERVICE BULLETIN EC135 EC135-85A-036 SEITE 4 of 5 REVISION 2, 2010-06-23 2009-04-16
3. Accomplishment instructions EFFECTIVITY Before accomplishment of Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
A. Accomplish a visual check of the hoist boom:
NOTE Effective for the installation of the external mounted hoist boom on the LH and on the RH side.
NOTE The visual check can be accomplished either by the maintenance personnel or the aircrew.
(1) Clean hoist boom (1, Figure 1) in the marked area and check for cracks. If necessary, use a flashlight and a mirror.
(2) If cracks are detected during the visual check, contact ECD customer support. In this case the hoist boom must be removed or replaced before the next flight.
B. Confirm accomplishment of this Emergency Alert Service Bulletin by an entry in the log card of the external mounted hoist system.
EFFECTIVITY With Revision 2 of this Emergency Alert Service Bulletin an inspection is specified i.a.w. Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
C. Accomplish Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
D. Confirm accomplishment of Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company by an entry in the log card of the external mounted hoist.
4. Appendix Service Bulletin 44307-500-03, Rev. 2 of the Goodrich company.
EMERGENCY
ALERT SERVICE BULLETIN EC135 EC135-85A-036 SEITE 5 of 5 2009-04-16 REVISION 2, 2010-06-23 Visual check of the Hoist Boom Figure 1 1 Hoist boom 1 2 2 2 Check for cracks.
Hoist boom with cracks.
Only LH external mounted hoist shown.
No text on this page: it may be a figure. Open the PDF to see it.
44307-500-03 Apr 30/10 Highlights-1
SENSORS AND INTEGRATED SYSTEMS (HOIST AND WINCH) 1550 S. VALLEY VISTA DR, DIAMOND BAR, CALIFORNIA 91765 TO: HOLDERS OF SERVICE BULLETIN 44307-500-3,Rev.1, DATED APR 21/10 COVERING THE BOOM ASSEMBLY , PART NUMBER 44307-500.
REVISION NO. 2, DATED APR 30/10
HIGHLIGHTS Pages which have been revised are outlines below together with the highlights of the revision. Please destroy your obsolete pages of this manual and replace it with Revision No. 2, DATED APR 30/10.
PAGE NO. DESCRIPTION OF CHANGE EFFECTIVITY 2 Revise the compliance time to read "within 30 days after receipt of this service bulletin".
All COMMERCE DEPARTMENT "These commodities, technology or software were exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law prohibited."
44307-500-03 Page 1 of 10
SERVICE BULLETIN Equipment/Furnishings - Boom and Support Assembly - One Time Inspection Feb 15/10
1. Planning Information A. Effectivity This Service Bulletin is applicable to the Boom and Support Assembly, part numbers 44301-500 and 44307-500. The affected boom and support assemblies are listed in Table
1. The Boom and Support Assemblies are manufactured by Goodrich Corporation, Sensors and Integrated Systems, Diamond Bar, California.
B. Reason During a routine inspection conducted in the field. Four boom and support assemblies were found to have cracks on the boom elbow, part number 44307-512 (Figure 1), Testing and failure analysis were conducted to identify the cause of the crack.
The root cause of cracking was found to be due to a customer maintenance error.
A one time visual inspection of the boom and support assembly is performed to ensure no cracks exist in other boom and support assemblies. If cracks are found, the boom and support assembly is removed from service and return to Goodrich for repair or replacement.Refer to paragraph 2.F for current price and RMA number.
COMMERCE DEPARTMENT "These commodities, technology or software were exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law prohibited."
C. Description This service bulletin provides the instructions necessary to perform the one time visual inspection and corrective action of the boom and support assembly elbow. The one time visual inspection consists of visually inspecting the boom and support assembly elbow. If crack (s) are found during the inspection, the boom and support assembly must be removed from the helicopter. If no cracks are found, the boom and support assembly may Table 1: Affected Boom and Support Serial Numbers
GOODRICH
PART NUMBER
GOODRICH
SERIAL NUMBER
GOODRICH
PART NUMBER
GOODIRCH
SERIAL NUMBER 44301-500 0002 thru 033 44307-500 0002 thru 0186 44307-500 0188 thru 0192 44307-500 0194 thru 0198 44307-500 0200 thru 0203 44307-500 0205 thru 0213
44307-500-03 Page 2 of 10 Feb 15/10 Revision 2-Apr 30/10
SERVICE BULLETIN Equipment/Furnishings - Boom and Support Assembly - One Time Inspection and Corrective Action remain in service and performance of the repetitive inspection i.a.w Eurocopter Germany MBB BK117 C-2-85A-024 or EC135-85A-036 is no longer necessary.
D. Compliance This mandatory one time inspection must be performed within the next 30 days after receipt of this Service Bulletin Compliance is mandatory as defined within the Eurocopter Deutschland Service Bulletin.
E. Approval This service bulletin contains no modification information that revises the approved configuration. This modification is in compliance with the existing FAA approved configuration. Certification of this Service Bulletin will be with Eurocopter Germany Service Bulletin.
F. Manpower
(1) The estimated amount of labor to accomplish the instructions of this Service Bulletin for one Boom and Support Assembly is 60 minutes, as follows:
(2) The one time visual Inspection described in this Service Bulletin shall be performed by Hoist Operators/Users, Goodrich Corporation, Sensors and Integrated Systems, or by personnel and facilities officially authorized by Goodrich Corporation, Sensors and Integrated Systems to perform this one time visual inspection.
G. Material — Cost and Availability
(1) Material required to accomplish the instructions of this Service Bulletin for each Boom and Support Assembly is located in Table 2.
Remove hoist and boom assembly 15 minutes Inspection 10 minutes Corrective action 20 minutes Install hoist and boom assembly 15 minutes
44307-500-03 Page 3 of 10
SERVICE BULLETIN Equipment/Furnishings - Boom and Support Assembly - One Time Inspection Feb 15/10 NOTE: *Corrosion Inhibitive compound, part number 148927 (PPG/PRC Desoto International, part number CA 1000, 2820 W. Empire Av. Burbank, CA 91504) may be used as an alternate.
NOTE: **Equivalent items can be use.
H. Tooling - Price and Availability None.
I. Weight and Balance Not affected.
J. Electrical Load Data Not affected.
K. Software Accomplishment Summary Table 2. Materials Required
NEW P/N DESCRIPTION OLD P/N QTY *148931 Joint Compound (Mastinox, 6856K MIL-P-8116B) ----- AR 148851 Polyurethane Paint, Fed-Std. 595 Mil-C-85285-Type I,II or III, Class H-Lusterless Black- Color No. 37038 ----- AR 146028 Wash Primer, Mil-C-8514 ----- AR 146030 Epoxy Primer, MIL-P-23377 ----- AR ----- Alodine, MIL-C-5541, Class 1A, ----- AR SBL 44307-500-03 Service Bulletin label ----- 1 ** PR1440 or PR1422 Sealant ----- AR **SK-416 Dye Penetrant Kit Magnaflux/ITW ----- 1
44307-500-03 Page 4 of 10 Feb 15/10
SERVICE BULLETIN Equipment/Furnishings - Boom and Support Assembly - One Time Inspection and Corrective Action None.
L. Reference Goodrich Corporation Component Maintenance Manual 25-00-21-1 M. Other Publications Affected None.
2. Accomplishment Instructions A. Prepare for inspection NOTE: Refer to the rescue hoist Component Maintenance Manual (CMM) 25-00-21- 1 for detail removal instructions. Refer to ECD LOAP document for current revision level.
(1) Set the rescue hoist power source OFF. Disconnect and remove the external electrical power source from the helicopter.
(2) Remove the rescue hoist from the boom and support assembly in accordance with the instructions in the appropriate CMM.
(3) Remove the boom and support from the helicopter in accordance with the instructions in the appropriate CMM.
NOTE: Penetranting oil may be required to remove the boom tube from the elbow.
(4) Remove the boom tube assembly from the elbow assembly in accordance with the instructions in the appropriate CMM.
(5) Clean the external and internal surface of the elbow where the crack or crack (s) are suspected (refer to Figure 1).
(6) Remove minor corrosion in accordance with the instructions in the appropriate CMM.
B. Inspection
44307-500-03 Page 5 of 10
SERVICE BULLETIN Equipment/Furnishings - Boom and Support Assembly - One Time Inspection Feb 15/10 NOTE: Crack or crack (s) are not allowed on any surface of the boom and support assembly. The unserviceable boom and support assembly must be removed from the helicopter.
NOTE: Conduct all checks under a strong light and 5x-power to 10x-power magnification to detect surface flaws.
(1) Visually inspect the internal and external surfaces of the of the boom and support elbow for cracks (Refer to Figure 1). If necessary, Perform dye penetrant inspection to confirm the suspected crack or crack (s). (refer to Step D).
(2) If the suspected crack or crack(s) are co nfirmed. Do not install the unserviceable boom and support assembly onto the helicopter. Send the unserviceable boom and support assembly to Goodrich repair center for replacement of the failed components.
(3) If no cracks are found return the boom and support assembly to service after performing step C.(1) below.
C. Final Assembly NOTE: Refer to the rescue hoist Component Maintenance Manual (CMM) 25-00-21- 1 for detail installation instructions.
(1) To mitigate the risk of damage to the boom and support assembly with no crack or crack(s) due to intrusion of corrosive elements perform the following steps:
(a) Apply a uniform thin film of joint compound on the entire mating surfaces of the elbow and boom tube.
(b) Install the boom tube into the elbow and rotate to ensure uniform distribution of the joint compound. Wipe off excess material from the boom tube and elbow.
(c) Install the mounting hardware. Torque the mounting hardware nuts to 8 to 12 inlbs (.9 N•m to 1.2 N•m). beyond running torque of the lock nut.
(d) Seal around the outside of the boom tube at the outboard face of the boom elbow using PR1440 or PR1422. Equivalent items can be used. See Figure 1.
(2) Install the boom and support on the helicopter in accordance with the instructions in the appropriate CMM.
(3) Install the rescue hoist on the boom and support assembly in accordance with the instructions in the appropriate CMM.
D. Dye Penetrant Inspection (DPI)