On this page
Text · 19OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0611, the docket of AD 2021-21-01. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0b212bd424d38f3964b65a3ebbc078a5918d4f584d98e33c3c3efd33207d7abf' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0b212bd424d38f3964b65a3ebbc078a5918d4f584d98e33c3c3efd33207d7abf' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB EC135-85A-081 Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE OPTIONAL EQUIPMENT - Rescue Hoist Modification of the hook assembly For the attention of Revision No. Date of issue Revision O 2020-10-29 Summary:
With this Alert Service Bulletin (ASB), Airbus Helicopters distributes the Service Bulletin (SB) 44301-10-37 Rev.4 of the Goodrich corporation. It provides instructions for the removal and replacement of several components of the hook assembly.
Compliance:
It is mandatory to obey this ASB.
Revision 0, 2020-10-29 PAGE 1 of 5 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-85A-081 1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3, all S/N with optional equipment Goodrich rescue hoist.
b) Affected rescue hoist:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.A.
Affected hook damper:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.A.
1.A.2 Non-installed equipment and parts See Section 1.A.1.b) of this ASB.
1.B ASSOCIATED REQUIREMENTS None.
1.C REASON With this ASB, Airbus Helicopters distributes the SB 44301-10-37 Rev.4 of the Goodrich corporation. It provides instructions for the removal and replacement of several components of the hook assembly.
After accomplishment of this ASB the P/N of the hook damper will be changed and the repetitive inspection according ASB EC135-85A-069 is no longer applicable.
1.D DESCRIPTION See Goodrich SB 44301-10-37 Rev.4, paragraph 1.C.
1.E COMPLIANCE
1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:
The removal and replacement of several components of the hook assembly must be accomplished in accordance with Goodrich SB 44301-10-37 Rev.4, paragraph 1.D. by September 30th, 2021 at the latest.
Non-installed equipment and parts:
See helicopters/installed equipment and parts.
1.E.2 Compliance in service Helicopters/installed equipment and parts:
The removal and replacement of several components of the hook assembly must be accomplished in accordance with Goodrich SB 44301-10-37 Rev.4, paragraph 1.D. by September 30th, 2021 at the latest.
Non-installed equipment and parts:
See helicopters/installed equipment and parts.
PAGE 2 of 5 Revision 0, 2020-10-29 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-85A-081
1.F APPROVAL Approval of modification (s):
The information or instructions contained in this document refer to change no. 6289.
The technical content of this document is approved by EASA.
1.G MANPOWER See Goodrich SB 44301-10-37 Rev.4, paragraph 1.F.
1.H WEIGHT AND BALANCE No effect on weight and balance.
1.l POWER CONSUMPTION Not affected.
1.J SOFTWARE UPGRADES/UPDATES Not changed.
1.K REFERENCES CMM 25-00-21-1.
1.L OTHER AFFECTED PUBLICATIONS Not affected.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Not affected.
Revision 0, 2020-10-29 PAGE 3 of 5 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-85A-081 2 MATERIAL INFORMATION
2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT See Goodrich SB 44301-10-37 Rev.4, paragraph 1.G.
2.B LOGISTIC INFORMATION See Goodrich SB 44301-10-37 Rev.4, paragraph 2.E.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT Material kits to be ordered for one helicopter or one assembly:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.G.
Special tools:
See Goodrich SB 44301-10-37 Rev.4, paragraph 1.H.
2.D MATERIAL TO BE RETURNED None.
PAGE 4 of 5 Revision 0, 2020-10-29 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB EC135-85A-081
ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Obey the "General recommendations for Working at helicopter" (AMM 03-10-02, 2-1).
З.В WORK STEPS
3.В.1 Procedure See Goodrich SB 44301-10-37 Rev.4, paragraph 2.A. and 2.B.
3.В.2 Tests For the functional test see Goodrich SB 44301-10-37 Rev.4, paragraph 2.C.
З.С COMPLIANCE CONFIRMATION Compliance with this document:
Record full compliance with this ASB, with the revision number, in the helicopter documents.
Record full compliance with this ASB, with the revision number, in the log card of the equipment (if a log card exists).
Identification of modifications on equipment or parts:
See Goodrich SB 44301-10-37 Rev.4, paragraph 2.D.
Please confirm compliance with this ASB:
QR-Code or hypertext link NOTE The recording of compliance with ASB in the R-Tex tool does not replace the recording in the helicopter documents ASB EC135-85A-081
3.D OPERATING AND MAINTENANCE INSTRUCTIONS None.
4 APPENDIX SB 44301-10-37 Rev.4 of the Goodrich corporation.
Revision 0, 2020-10-29 PAGE 5 of 5 This document is available on the internet: www.airbushelicopters.com/techpub/
No text on this page: it may be a figure. Open the PDF to see it.
GOODRICH
SERVICE BULLETIN Equipment/Furnishings - Rescue Hoist - Hook Modification TO: HOLDERS OF SERVICE BULLETIN 44301-10-37 REVISION 3, DATED APR 16/19.
REVISION NO. 4, DATED FEB 26/20
HIGHLIGHTS This Service Bulletin has been revised. Highlights of this revision are included below, and change bars have been included, indicating areas of change. Please destroy your obsolete copy of this service Bulletin and replace it with Revision No. 4 dated Feb 26/20.
PAGE NO. DESCRIPTION OF CHANGE EFFECTIVITY 1 Table 1. Hoist Effectivity updated to Serial Number, All and Note added for Table 1.
2 Compliance Paragraph 1.D updated. All 2 Manpower Paragraph 1.F.(2). work performance, All authorized personnel updated.
3 Paragraph 1.G. (3) (a). Material availability updated All 4 Paragraph 1.H. (2). Tooling requirement updated. All 10 Figure 3. Dimensions added for local manufacturing All option for Service Bulletin Label.
Highlights-1 Warning - This information contains technical data subject to EAR ECCN: 9E991 44301-10-37 Feb 26/20 Rev 4
GOODRICH
SERVICE BULLETIN Equipment/Furnishings - Rescue Hoist - Hook Modification
THIS PAGE IS INTENTIONALLY LEFT BLANK Highlights-2 Warning - This information contains technical data subject to EAR ECCN: 9E991 44301-10-37 Feb 26/20 Rev 4
GOODRICH
SERVICE BULLETIN Equipment/Furnishings - Rescue Hoist - Hook Modification
1. Planning Information A. Effectivity This Service Bulletin is applicable to the Goodrich Rescue Hoists defined in Table 1.
Table 1. Effectivity
HOIST ORIGINAL HOOK NEW
HOIST SERIAL NUMBER DAMPER HOOK DAMPER
PART NUMBER EFFECTIVITY (FOR REFERENCE) (FOR REFERENCE) 44301-10-2 44301-420 44301-425-103 44301-10-5 44301-420 44301-425-103 44301-10-6 44301-420 44301-425-103 44301-10-10 *41314 or lower 44301-423 44301-425 44301-10-11 44301-423 44301-425 44301-10-12 44301-423 44301-425 44301-10-13 44301-423 44301-425 NOTE: * A "4" in the leading digit of the serial number indicates hoist has a POP 2 clutch installed (refer to SB 44301-10-23). For the effectivity of this SB the leading digit is irrelevant (i.e. OXXXX is the same as 4XXXX).
B. Reason To increase the level of safety in the hook assembly and reduce the chance that the hook assembly can separate from the hoist cable. This will be accomplished by the replacement of parts internal to the hook assembly.
C. Description It was observed that a hook separated from the cable. This was caused by a dual failure;
an internal retaining ring failed and the elastomeric energy absorber (the bumper) took a compression set. The retaining ring can corrode in a salt-laden environment.
This Service Bulletin provides instructions for the removal and replacement of several components of the hook assemblies. The existing cable split retainers and retainer ring are replaced with newly designed cable retainer and other parts are modified to further prevent separation of the hook from the cable.
Page 1 of 11 44301-10-37 Feb 26/20 Warning - This information contains technical data subject to EAR ECCN: 9E991 Rev 4
GOODRICH
SERVICE BULLETIN Equipment/Furnishings - Rescue Hoist - Hook Modification D. Compliance Incorporation of this Service Bulletin is mandatory for all hoists listed on Table 1. This Service Bulletin is to be done by the Operator at Level 1 Organizational Maintenance or for all hoists listed and are undergoing Level 2 Intermediate or Level 3 Depot Maintenance.
This Service Bulletin shall be done no later than September 30th, 2021.
E. Approval This Service Bulletin contains no modification information that revises the approved configuration. The work performed is in compliance with the existing FAA/EASA approved configuration.
F. Manpower
(1) The estimated amount of labor to accomplish the instructions of this Service Bulletin is 30 minutes, as follows:
Table 2. Estimated Labor
TASK TIME (MIN) Disassembly 10 Assembly 20
(2) The modification work described in this Service Bulletin may be performed by the Hoist Operator (Organizational Level maintenance), Goodrich Corporation, or by personnel and facilities authorized by Goodrich Corporation to perform Intermediate, or Depot Level maintenance.
Page 2 of 11 Warning - This information contains technical data subject to EAR ECCN: 9E991 44301-10-37 Feb 26/20 Rev 4
GOODRICH
SERVICE BULLETIN Equipment/Furnishings - Rescue Hoist - Hook Modification G. Material - Cost and Availability
(1) The following parts are required to accomplish the instructions of this Service Bulletin:
Table 3. Required Parts
INSTRUCTIONS/
NEW P/N QTY DESCRIPTION OLD P/N DISPOSITION 44307-496 Cable Retainer, Slotted 42305-286 Replace 44301-416 1 Cap, Seal 42277-284 Replace 44301-415 1 Disc, Lower 44301-403 Replace N/A N/A Ring, Retaining MS16625-4075 Discard MS28775-023 1 O-ring MS28775-023 Replace SBL44301-10-37 1 Service Bulletin Label IN/A Install on Rescue Hoist Assembly after SB incorporation These items are available in kit SBK44301-10-37
(2) The following material is required to accomplish the instructions of this Service Bulletin:
Table 4. Required Materials
PART NUMBER/
DESCRIPTION SPECIFICATION QTY SOURCE Lithium Based Grease 630-AA AR Lubriplate (Cage Code 83747)
(3) Material Availability
(a) Parts required for the implementation of this Service Bulletin will be provided by Goodrich Corporation free of charge.
(b) As-required materials must be supplied by the Operator/facility performing the modification.
(4) Warranted Items Costs
(a) Replaced parts under this service bulletin will carry a one (1) year warranty after installation.
Page 3 of 11 Warning - This information contains technical data subject to EAR ECCN: 9E991 44301-10-37 Feb 26/20 Rev 4
GOODRICH
SERVICE BULLETIN Equipment/Furnishings - Rescue Hoist - Hook Modification H. Tooling - Price and Availability
(1) The required tooling to accomplish this Service Bulletin are as follows:
Table 5. Required Tooling
PART NUMBER/
DESCRIPTION SPECIFICATION SOURCE Disassembly Tool T44301-400PU1 Goodrich Corporation (3HRL4) This item is available in kit SBK44301-10-37
(2) Tooling required for the implementation of this Service Bulletin will be provided by Goodrich Corporation free of charge.
Weight and Balance Not affected.
J. Electrical Load Data Not affected.
K. Software Accomplishment Summary Not applicable.
Reference CMM 25-00-21-1 CMM 25-60-30-2 CMM 25-60-30-3 M. Other Publications Affected None Page 4 of 11 Warning - This information contains technical data subject to EAR ECCN: 9E991 44301-10-37 Feb 26/20 Rev 4