On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0102, the docket of AD 2022-09-04. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1123, the docket of AD 2021-05-05. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- Type
- Alert Service Bulletin
- Number
- EC155-04A014
- Latest revision known
- EC155-04A014, Revision 6, dated May 4, 2016
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 23OCR
Revision 6, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0102, the docket of AD 2022-09-04. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7003479379f8d8c344b283fc9926a3da42b9d8005cfb7633d95d8e3389cd8596' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7003479379f8d8c344b283fc9926a3da42b9d8005cfb7633d95d8e3389cd8596' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. EC155-04A014 Civil version(s): B, B1
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE LIMITATIONS - Control rod double bearing Tail Gearbox (TGB) ATA: 65 For the attention of Revision No. Date of issue Revision 0 2016-05-04 Revision 1 2016-06-03 Revision 2 2016-10-28 Revision 3 2017-07-20 Revision 4 2019-12-11 Revision 5 2020-03-25 Revision 6 2021-06-14 Summary:
- Periodic replacement of the TGB control rod double bearing on PRE MOD 07 65B63 TGBs.
- Pending the next replacement of the control rod double bearing, reducing the inspection interval for the TGB magnetic plug to ensure that there are no particles, and removing the control shaft/rod assembly once or twice (depending on the case) to inspect the double bearing.
- Maintaining the TGB operating oil at the maximum level.
Compliance with this ALERT SERVICE BULLETIN supersedes the instructions specified in EC155 ALERT SERVICE BULLETIN No. 05A022.
Reason for last revision:
Following additional tests and their analysis, the purpose of revision 6 of this ALERT SERVICE BULLETIN is to reinforce the monitoring critera of the double bearing.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2016-05-04 Page 1/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpubl
AIRBUS HELICOPTERS No. EC155-04A014
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts On PRE MOD 07 65B63 Tail Gearboxes (TGB).
NOTE 1 Series modification 07 65B63 creates a new TGB Part Number 365A33-6005-09 enabling the instructions of this ALERT SERVICE BULLETIN to be canceled.
Helicopters which embody MOD 07 65B63 are instructions given in this ALERT SERVICE BULLETIN.
1.A.2. Non-installed equipment or parts On PRE MOD 07 65B63 TGBS.
On PRE MOD 07 65B57 double bearings.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Revision 0 Airbus Helicopters has recently participated in investigations following an accident that was due to the loss of yaw control on an AS365 N3 helicopter.
This helicopter had been subject to periodic checks carried out in accordance with the instructions given in Revision 4 of ALERT SERVICE BULLETIN No. 05A022.
The preliminary examination of the TGB revealed that the control rod double bearing was damaged.
Investigations are ongoing to determine the cause of this damage and the reasons for its non-detection.
In order to prevent the risk of undetected double bearing damage, Airbus Helicopters makes compliance with the instructions given in this ALERT SERVICE BULLETIN mandatory, the purpose of which is:
- to ensure that the TGB lubricating oil level is at the "max" level,
- to periodically replace the control rod double bearing on TGBs that do not embody the latest modifications,
- pending the next replacement of the control rod double bearing, to check more frequently that there are no particles at the TGB magnetic plug, and to remove the control shaft/rod assembly once or twice (depending on the case) for inspection of the double bearing,
- and to cancel compliance with ALERT SERVICE BULLETIN No. 05A022.
Revision 1 Following the issue of Revision 0 of this ALERT SERVICE BULLETIN, Airbus Helicopters would like to add some details to paragraph 1.E.2.a.2. concerning the check of the magnetic plug.
Furthermore, in order to analyze the possibility of increasing the interval between periodic replacements of POST MOD 07 65B57 bearings, Airbus Helicopters requests the return of some bearings.
A bearing monitoring sheet has therefore been added in appendix paragraph 4.B. It must be filled in and returned to Airbus Helicopters during the next replacement following the issue of this In addition, a flow chart has been added to paragraph 2.D. This flow chart explains the process for returning bearings and the monitoring sheet given in Appendix 4.B. to Airbus Helicopters.
Revision 0 2016-05-04 Page 2/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014 Revision 2 Following the issue of Revisions 0 and 1 of this ALERT SERVICE BULLETIN, Airbus Helicopters wishes to clarify paragraph 1.E.2. concerning the embodiment of MOD 07 65B56 or 07 65B58.
These MODs improve the sliding action of the control rod assembly in the TGB, by installing new guide rings.
MOD 07 65B56 is embodied on all new TGBs and during Overhaul (RG).
MOD 07 65B58 may be embodied through EC155 Service Bulletin No. 65-006 or during repair (RE).
Airbus Helicopters reminds you that it was mandatory to embody MOD 07 65B58 before September 30, 2011, following the issue of EC155 ALERT SERVICE BULLETIN No. 05A022 Revision 1 dated July 13, 2011.
Airbus Helicopters requests that you check for the presence of new guide rings when replacing the double bearing.
Revision 3 Since the issue of Revision 2, complementary tests have been performed on particle detection in the TGB.
In order to ensure an earlier detection of a potential degradation of the double bearing Airbus Helicopters revised the current inspection and close monitoring procedure for PRE MOD 07 65B63 TGBs:
- the inspection interval for the electrical magnetic plug is changed from 100 flying hours to 25 flying hours, as for the manual magnetic plug,
- modification of the procedure after detection of particles as scale, flake, splinter or abrasion at the TGB magnetic plug in order to identify quickly and more efficiently a double bearing degradation. Now, when detection of these types of particles in the TGB, a metallurgical analysis or a complete cleaning of the TGB is required.
In addition, a calendar limitation is introduced in order to ensure that POST MOD 07 65B63 will be the standard on all TGB after 01/01/2024.
Revision 3 does not affect compliance with the previous revisions of this ALERT SERVICE BULLETIN Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 4 The purpose of revision 4 is:
- to improve the washing procedure for the double bearing of the TGB control rod,
- to specify the commercial conditions related to the return of the bearings in paragraph 2.D,
- to remind customers to be cautious with abrasion particles (class g in the MTC).
Revision 5 Following experience feedback (flight hours cumulated and chip events) which allowed Airbus Helicopters to review the global detection performances of the bearing degradation on POST MOD 65B63 TGBs, ALERT SERVICE BULLETIN No. 04A016 has been revised to reduce the interval of the chip detector inspection.
As a precautionary measure, Airbus Helicopters is also reducing the interval of the chip detector inspection on PRE MOD 65B63 TGBs.
The purpose of revision 5 is to introduce this reduction of interval on the chip detector to 20 FH for bearings with less than 250 FH and 10 FH for bearing with more than 250 FHS to improve detection of the particles.
This protective measure is a temporary measure.
Airbus Helicopters takes advantage of this revision to modify Appendix 4.B. to mention the type of oil used and its manufacturer.
Revision 0 2016-05-04 Page 3/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpubl
AIRBUS HELICOPTERS No. EC155-04A014 Revision 6 Following additional tests and their analysis, the purpose of revision 6 of this ALERT SERVICE BULLETIN is to reinforce the monitoring critera of the double bearing.
1.D. DESCRIPTION The purpose of this ALERT SERVICE BULLETIN is to periodically replace the double bearing of the TGB control rod.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service
1.E.2.a. Helicopters/installed equipment or parts:
NOTE 2 A flow chart which describes the maintenance operations required by this ALERT SERVICE BULLETIN is also available in Appendix 4.A.
1.E.2.a.1. Check of the TGB oil level
- Comply with paragraph 3.B.1. during each flight-related check (15 hours or 7 days).
1.E.2.a.2. Check of the TGB manual magnetic plug or magnetic plug with electrical indicating
- Check if there are particles at the TGB magnetic plug as per AMM Task 12-20-00-211 and comply with paragraph 3.B.2. after each last flight of the day, pending the next replacement of the double bearing following the issue of Revision 0 of this ALERT SERVICE BULLETIN on May 4, 2016.
- Then, after replacement of the double bearing:
. For double bearings with less than 250 FH:
.. Comply with the flow chart as per paragraph 3.B.2. within 10 FH from receipt of revision 6 of this ALERT SERVICE BULLETIN issued on the date indicated in the page footer without exceeding 20 FH since the last inspection of the TGB chip detector . For double bearings with 250 FH or more:
.. Comply with the flow chart as per paragraph 3.B.2. without exceeding 10 FH since the last inspection of the TGB chip detector Then,
- Comply with the flow chart as per paragraph 3.B.2. at intervals that do not exceed 10 FH.
Revision 0 2016-05-04 Page 4/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014
1.E.2.a.3. For all TGBS
- For all helicopters which comply with Revision 0 or 1 of this ALERT SERVICE BULLETIN:
. check for the MOD 07 65B56 or 07 65B58 indication on the TGB Log Card (FM):
- if one of these MODs is indicated, leave as is,
- if neither of these MODs is indicated, comply with EC155 Service Bulletin No. 65-006.
- For helicopters which do not comply with Revision 0 or 1 of this ALERT SERVICE BULLETIN:
CAUTION
WE REMIND YOU THAT IT IS MANDATORY TO
COMPLY WITH THE INSTALLATION
INSTRUCTIONS AND TO USE THE SPECIFIC
TOOLS FOR THE DOUBLE BEARING REPLACEMENT.
CAUTION
WHEN REPLACING THE DOUBLE BEARING, ENSURE THAT EMBODIMENT OF MOD 0765B56 OR 0765B58 HAS BEEN RECORDED ON THE TGB LOG CARD (FM).
a) For PRE MOD 07 65B57 double bearings of the control shaft/rod assembly NOTE 3 MOD 07 65B57 consists in introducing a new double bearing (MP/N 704A33-651-245 or 704A33-651-246 depending on the manufacturer).
This new double bearing:
- has an optimized design which favors the evacuation of
- has a reinforced structure,
- is interchangeable with a PRE MOD 07 65B57 double bearing (MP/N 704A33-651-093 or 704A33-651-104 depending on the manufacturer).
1) For new double bearings or double bearings which have logged less than 335 flying hours . At the latest when 350 flying hours are reached, replace the PRE MOD 07 65B57 double bearing with a POST MOD 07 65B57 double bearing as per EC155 Service Bulletin No. 65-007:
.. When replacing the bearing, comply with paragraph 2.D.
. Then comply with paragraph 1.E.2.a.3.b)1).
Revision 0 2016-05-04 Page 5/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014
2) For double bearings which have logged 335 or more flying hours
• Replace the PRE MOD 07 65B57 double bearing with a POST MOD 07 65B57 double bearing as per EC155 Service Bulletin No. 65-007 within 110 flying hours following receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the date indicated at the bottom of the page:
..Pending the replacement of the double bearing, comply with paragraph 3.B.3. within 15 flying hours following receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the date indicated at the bottom of the page, Then, .. Comply with paragraph 3.B.3. every 55 flying hours maximum until the double bearing is replaced.
.. When replacing the bearing, comply with paragraph 2.D.
. Then comply with paragraph 1.E.2.a.3.b)1).
b) For POST MOD 07 65B57 double bearings of the control shaft/rod assembly NOTE 4 MOD 07 65B57 consists in introducing a new double bearing (MP/N 704A33-651-245 or 704A33-651-246 depending on the manufacturer).
This new double bearing:
- has an optimized design which favors the evacuation of particles,
- has a reinforced structure,
- is interchangeable with a PRE MOD 07 65B57 double (MP/N 704A33-651-093 or 704A33-651-104 depending on the manufacturer).
1) For new double bearings or double bearings which have logged less than 485 flying hours
• At the latest when 500 flying hours are reached, replace the double bearing as per Aircraft Maintenance Manual (AMM) Task 65-20-01-961.
.. When replacing the bearing, comply with paragraph 2.D.
. Then, replace the double bearing every 500 flying hours as per AMM Task 65-20-01-961.
2) For double bearings which have logged more than 485 flying hours
• Replace the double bearing within 110 flying hours following receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the date indicated at the bottom of the page:
..Pending the replacement of the double bearing, comply only once with paragraph 3.B.3.
within 15 flying hours following receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the date indicated at the bottom of the page, .. When replacing the bearing, comply with paragraph 2.D.
. Then, replace the double bearing every 500 flying hours as per AMM Task 65-20-01-961.
1.E.2.a.4. Helicopters equipped with a TGB PRE MOD 07 65B63 will be unfit for flight from January 01, 2025.
Revision 0 2016-05-04 Page 6/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpubl
AIRBUS HELICOPTERS No. EC155-04A014
1.E.2.b. Non-installed equipment or parts:
CAUTION
WHEN REPLACING THE DOUBLE BEARING, ENSURE THAT EMBODIMENT OF MOD 0765B56 OR 0765B58 HAS BEEN RECORDED ON THE TGB LOG CARD (FM).
- It is prohibited to install PRE MOD 07 65B57 double bearings on TGBs from receipt of this ALERT SERVICE BULLETIN issued on the date indicated at the bottom of the page.
- On TGBs equipped with a PRE MOD 07 65B57 double bearing:
Before installation on the helicopter, replace the control rod double bearing with a POST MOD 07 65B57 double bearing as per EC155 Service Bulletin No. 65-007.
- On TGBs equipped with a POST MOD 07 65B57 double bearing:
Comply with the instructions given in paragraph 1.E.2.a.3.b)
- Do not install TGB PRE MOD 07 07 65B63 after January 01, 2025.
1.F. APPROVAL Approval of modifications:
The information or instructions related to modification 07 65B57 were approved on April 18, 2012 by the EASA for helicopters of civil versions subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on May 04, 2016 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on June 03, 2016 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on October 28, 2016 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 3 was approved on July 19, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 4 was approved on December 10, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 5 was approved on March 24, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
Revision 0 2016-05-04 Page 7/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpubl
AIRBUS HELICOPTERS No. EC155-04A014 The technical information contained in this ALERT SERVICE BULLETIN Revision 6 was approved on June 09, 2021 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER For compliance with this Service Bulletin, Airbus Helicopters recommends the following staff qualifications:
Qualification:
- 1 Mechanical Engineering Technician Or
- 1 Pilot with the appropriate training and certification for compliance with paragraph 3.B.1.
For compliance with paragraphs 3.B.2. and 3.B.3., the mechanical engineering technician qualification is mandatory.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.
Estimated Man-hours:
For compliance with paragraph 3.B.1.: approximately 30 minutes.
For compliance with paragraph 3.B.2.: approximately 1 hour (excluding metallurgical analysis).
For compliance with paragraph 3.B.3.: approximately 8 hours.
Approximately 2 days to replace the double bearing.
Estimated helicopter downtime:
Helicopter downtime is estimated at 2 days.
1.H. WEIGHT AND BALANCE Not applicable.
1.l. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
Revision 0 2016-05-04 Page 8/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014
1.K. REFERENCES Aircraft Maintenance Manual (AMM) Tasks:
05-50-01-211 - 12-20-00-211 - 65-20-01-061 - 65-20-01-066 - 65-20-01-611 - 65-20-01-961 Standard Practices Manual (MTC) Work Cards:
20-04-01-102 - 20-08-01-601 EC155 Service Bulletin No. 65-006 EC155 Service Bulletin No. 65-007 Information Notice (IN):
3481-1-00: The Marketplace: an AirbusWorld Ordering service 3643-1-00: Introduction of the digital Service Bulletin reporting R-Tex
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2016-05-04 Page 9/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT The bearings will be supplied free of charge by the Airbus Helicopters Programs Department.
Specify the helicopter serial number when placing your order.
For any information concerning the kits or components or for assistance, contact the Airbus Helicopters Network Sales & Customer Relations Department.
Order as required from:
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION For any information concerning modification kits and/or components or for assistance, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Revision 0 2016-05-04 Page 10/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits or components to be ordered for one helicopter or one assembly:
Former Designation Qty New P/N Item P/N → Instruction Double bearing ((FAG) POST 704A33-651-245 1 To be replaced MOD 07 65B57) Or Double bearing ((SNR) POST 704A33-651-246 To be replaced MOD 07 65B57) Consumables to be ordered separately:
Refer to the Work Cards and Tasks specified in this ALERT SERVICE BULLETIN and the list below:
Designation Qty Consumable P/N Item WHITE SPIRIT A/R Off the shelf 2 You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
- Return the bearing monitoring sheet given in APPENDIX 4.B. to the Airbus Helicopters Technical Support:
Fax: +33 (0)4.42.85.99.66 E-mail: support.technical-dyncomp.ah@airbus.com or TechnicalSupport.Helicopters@airbus.com)
- In accordance with the flow chart below, return the double bearing to the Airbus Helicopters Technical Support at the following address:
Airbus Helicopters Aéroport Marseille Provence RETEX Factory - roulement double de BTA MAH09MGA2 - B1 - LES BORIES
SOUS SOL - ARRIVEE 13725 Marignane CEDEX FRANCE NOTE 3 The expenses for the return of the bearing to Airbus Helicopters are supported by Airbus Helicopters.
Revision 0 2016-05-04 Page 11/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-04A014 Bearing removal
PRE MOD POST MOD 07 65B57 07 65B57 bearing bearing P/N: 704A33651.104 P/N: 704A33651.246 P/N: 704A33651.093 P/N: 704A33651.245 Correct Presence of play TSN ≤ 500 FH TSN > 500 FH condition and/or particles Correct Presence of play condition and/or particles Send the Send the Send the Send the Send the monitoring sheet monitoring sheet monitoring sheet monitoring sheet monitoring sheet given in given in given in given in given in APPENDIX 4.B. APPENDIX 4.B. APPENDIX 4.B. APPENDIX 4.B. APPENDIX 4.B.
+ scrap the + send the + scrap the + send the + scrap the bearing bearing to bearing bearing to bearing Airbus Airbus Helicopters Helicopters Flow chart for the bearing return process Revision 0 2016-05-04 Page 12/23 Revision 6 2021-06-14 This document is available on the internet: www.airbushelicopters.com/techpub/