Service bulletin · Airbus Helicopters

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

No revision namedAirbus Helicopters ASB EC155-05A033 Revision 0 · 9 pages · 742 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0384; AD 2018-19-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2018-0384 (document 0003) · AD 2018-19-01

No revision namedASB EC155-05A033 R1 · 10 pages · 280 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1018, the docket of AD 2021-02-08. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-1018 (document 0006) · AD 2021-02-08

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC155-05A033

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 9OCR

No revision named, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0384; AD 2018-19-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '0d3afc0ec9cf2a6529ebc55b693a0cc0e161b05838a9cedb818c6f30ea8349ff'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033 Civil version(s): B, B1

ALERT SERVICE BULLETIN SUBJECT: TIME LIMITS - MAINTENANCE CHECKS - Baggage compartment Inspection of the baggage compartment skin For the attention of Revision No. Date of issue Revision 0 2017-07-21 Summary:

This ALERT SERVICE BULLETIN consists in:

- performing a tapping inspection of the baggage compartment external skin within 110 flying hours, Then,

- performing a periodic visual inspection of the baggage compartment external skin every 110 flying hours,

- performing a periodic tapping inspection of the baggage compartment external skin every 660 flying hours.

Compliance:

Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.

Revision 0 2017-07-21 Page 1/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts All helicopters.

1.A.2. Non-installed equipment or parts Not applicable.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Airbus Helicopters has been informed of several cases of debonding of the baggage compartment skin.

These observations were made during the 600-FH inspection of the structure on EC155 helicopters.

The possible causes, which are still under investigation, are the heat of the exhaust gas released by the exhaust pipes and certain climatic conditions (high heat and high humidity).

Consequently, Airbus Helicopters introduces a periodic (visual and tapping) inspection of the area.

Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.

1.D. DESCRIPTION Compliance with this ALERT SERVICE BULLETIN consists in:

- performing a tapping inspection of the baggage compartment external skin, Then,

- performing a periodic visual inspection of the baggage compartment external skin,

- performing a periodic tapping inspection of the baggage compartment external skin.

Revision 0 2017-07-21 Page 2/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033

1.E. COMPLIANCE The work on the helicopter is to be performed by the operator.

1.E.1. Compliance at H/C manufacturer level Not applicable.

1.E.2. Compliance in service

1.E.2.a. Helicopters/installed equipment or parts Perform a tapping inspection of the skin as per paragraphs 3.B.1. and 3.B.2. within 110 flying hours following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the bottom of the page.

Interpretation of the results

- If no debonding of the external skin is detected:

• perform a visual inspection every 110 flying hours as per paragraphs 3.B.1. and 3.B.3., And, . perform a tapping inspection every 660 flying hours as per paragraph 3.B.1. and 3.B.2.

- If the debonded surface(s) delimited by tapping is/are located in only one square of 10 × 10 cm

(3.94 x 3.94 in) or less (see Figure 2):

. report the size and location to the Airbus Helicopters Customer Support Department:

- Fax: + 33 (0)4.42.85.99.66

- E-mail: Airframe.Technical-Support@airbus.com

- Keycopter: Technical Request Management

• then, perform a tapping inspection every 110 flying hours as per paragraphs 3.B.1. and 3.B.2.

- In all other cases of debonding and before resuming flights:

. contact the Airbus Helicopters Customer Support Department to obtain a suitable repair solution through an RDAS (Repair Design Approval Sheet) by:

- Fax: + 33 (0)4.42.85.99.66

- E-mail: Airframe.Technical-Support@airbus.com

- Keycopter: Technical Request Management

1.E.2.b. Non-installed equipment or parts Not applicable.

1.F. APPROVAL Approval of modifications:

Not applicable.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 21, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Revision 0 2017-07-21 Page 3/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualification:

Qualification: 1 Airframe Technician qualified for tapping inspections.

The time for the operations is given for information purposes, for a standard configuration.

Time for the operations: - (approximately) 1 hour and 30 minutes to comply with paragraph 3.B.2. on one side,

- (approximately) 10 minutes to comply with paragraph 3.B.3. on one side.

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:

Standard Practices Manual (MTC):

Work Card: 20.03.06.601: Structural repairs - Assembled components check Work Card: 20.60.00.432: Blade standard practices - Audio control procedure by blade tapping

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2017-07-21 Page 4/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT For any information concerning the kits and/or components or for assistance, contact the Airbus Helicopters Network Sales & Customer Relations Department.

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Consumables to be ordered separately:

Refer to the Work Cards referenced in this ALERT SERVICE BULLETIN.

The consumables can be ordered separately from KLX AEROSPACE SOLUTIONS.

Website: https://www.klxaerospace.com/klxaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2017-07-21 Page 5/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Not applicable.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Install the access equipment.

- Remove and/or open any cowlings, panels, doors and equipment required to gain access to the different work areas.

- If necessary, remove the thermal protection.

3.B.2. Tapping inspection of the baggage compartment external skin (Figure 1)

- Perform a tapping inspection of the external skin located between frames X4630 and X6630 (see Figure 1) as per MTC Work Cards 20.03.06.601 and 20.60.00.432.

NOTE 1 The tapping inspection is to be carried out on sections of 3 cm (1.18 in) maximum, along the X and Z axes.

NOTE 2 The skin must be clean for this inspection.

- Interpret the results as per paragraph 1.E.2.a.

- Then comply with paragraph 3.B.4.

3.B.3. Visual inspection of the baggage compartment external skin (Figure 1)

- Perform a visual inspection of the baggage compartment external skin between frames X4630 and X6630 (see Figure 1) using low-angled light (e.g. LED bar):

NOTE 3 The skin must be clean for this inspection.

. in the event of distortion, wrinkling or corrosion: comply with paragraph 3.B.2.,

• otherwise, comply with paragraph 3.B.4.

3.B.4. Final steps

- Remove the access equipment.

- Install and/or close any cowlings, panels, doors and equipment removed and/or opened during the preliminary steps (paragraph 3.B.1.).

- If necessary, install the thermal protection.

Revision 0 2017-07-21 Page 6/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033

3.C. COMPLIANCE CONFIRMATION Compliance with this document:

Record first compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Revision 0 2017-07-21 Page 7/9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033 — Area to be inspected Areas to be inspected:

LH and RH skin X4630 X6630 Figure 1: Delimitation of the areas to be inspected Revision 0 2017-07-21 Page 8/9 This document is available on the internet: www.a copters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-05A033 Only one square of 10 x 10 cm

(3.94 x 3.94 in.) or less Example of acceptable debonding Debonded surfaces Examples of unacceptable debonding Square of 10 x 10 cm

(3.94 × 3.94 in.) or less, but straddling two skin panels Debonded surfaces Square greater than 10 × 10 cm

(3.94 × 3.94 in.)

Figure 2: Examples of debonded surfaces Revision 0 2017-07-21 Page 9/9 This document is available on the internet: www.airbushelicopters.com/techpub/