Service bulletin · Eurocopter

Revision 1Eurocopter ASB No EC-155-25A114 R1 · 15 pages · 726 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0480; AD 2013-19-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2013-0480 (document 0004) · AD 2013-19-07

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Alert Service Bulletin
Number
EC155-25A114
Latest revision known
EC155-25A114, Revision 1, dated August 9, 2012

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 15OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0480; AD 2013-19-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '486f37cb779abc7bc450410b718f6cf7cd90cd1e2cec6bfc0a303d93834bcac4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114 Civil version(s): B, B1

ALERT SERVICE BULLETIN SUBJECT: EQUIPMENT AND FURNISHINGS - Pilot and co-pilot seats Inspection of the rear beam of the seat For the attention of Revision No. Date of issue Revision 0 2012-05-14 Revision 1 2012-08-09 Summary:

The purpose of this ALERT SERVICE BULLETIN is to check that there are weld beads on the rear beam of the pilot and co-pilot seats.

Reason for last Revision:

The purpose of the last revision is to replace in the appendix EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 0 with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1, which requires an additional check of all welds of the rear beam of the seats.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Revision 0 2012-05-14 Page 1/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 2OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment On helicopters equipped with pilot and co-pilot seats part number (MP/N) 2510106-03-00 or 2510106-06-00 with serial number (S/N) between 720 (inclusive) and 1451 (inclusive) and on which compliance with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1 has not been ensured.

1.A.2. Non-installed equipment On pilot and co-pilot seats part number (MP/N) 2510106-03-00 or 2510106-06-00 with S/N between 720 (inclusive) and 1451 (inclusive) and on which compliance with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1 has not been ensured.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Revision 0:

During a maintenance inspection, it was found that a weld bead was missing on the rear beam of a seat.

This non-conformity, if not detected and corrected, could lead to crew injury in case of helicopter hard landing.

EADS SOGERMA requires that the pilot and co-pilot seats be inspected to make sure that there is a weld bead on the rear beam of the seat.

This inspection is necessary to make sure that the seats are serviceable and comply with the flight safety rules.

Consequently, EUROCOPTER renders compliance with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 mandatory, through this ALERT SERVICE BULLETIN Revision O.

This ALERT SERVICE BULLETIN Revision O will form the subject of an EASA Airworthiness Directive.

Revision 1:

During compliance with Revision 0 of this ALERT SERVICE BULLETIN, it was found that a weld bead was missing on another part of the rear beam.

This non-conformity, if not detected and corrected, could lead to flight crew injury in case of helicopter hard landing.

The purpose of the last revision is to replace in the appendix EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision O with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1, which requires an additional check of all welds of the rear beam of the seats.

The purpose of Revision 1 of EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 is to add intormation to the operating procedure and to add photos showing new areas to be checked.

Revision 1 affects compliance with Revision 0 of this ALERT SERVICE BULLETIN.

Revision 0 2012-05-14 Page 2/15 Revision 1 2012-08-09 This document is available on the internet: www eurocopter.com/techpub

Page 3OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114

1.D. DESCRIPTION Compliance with this ALERT SERVICE BULLETIN Revision 1 consists in extending the check for the weld bead to the whole of the rear beam of the seat in accordance with EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

1.E. COMPLIANCE

1.E.1. Compliance at the works Helicopters/installed equipment:

Comply with paragraph 3. of this ALERT SERVICE BULLETIN before delivery.

Non-installed equipment:

Comply with paragraph 3.B. before delivery.

1.E.2. Compliance in service The work on the helicopter is to be performed by the operator.

Helicopters/installed equipment:

- Comply with paragraph 3. of this ALERT SERVICE BULLETIN within 50 flying hours or 3 months, the first limit reached is applicable, following receipt of this ALERT SERVICE BULLETIN Revision 1, issued on the date indicated at the bottom of the page.

- If a weld bead is missing, according to the location, replace the beam or the seat within 50 flying hours or 3 months, the first limit reached is applicable, following receipt of this ALERT SERVICE BULLETIN Revision 1, issued on the date indicated at the bottom of the page.

NOTE In order to have sufficient time to replace a seat if necessary, before reaching 50 flying hours or 3 months, EUROCOPTER recommends that you perform the check at the first opportunity, in order to inform SOGERMA as quickly as possible of any non-compliance of the seat, if any.

Non-installed equipment:

Comply with paragraph 3.B. before installation on the helicopter, without exceeding 3 months following receipt of this ALERT SERVICE BULLETIN Revision 1, issued on the date indicated at the bottom of the page.

If the weld bead is missing, the installation of this seat is prohibited.

Revision 0 2012-05-14 Page 3/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 4OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114

1.F. APPROVAL Approval of modifications:

Not applicable.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on May 11, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on August 09, 2012 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.

1.G. MANPOWER EUROCOPTER recommends that compliance with this ALERT SERVICE BULLETIN is ensured by personnel qualified as follows:

Qualification: - 1 Mechanical Engineering Technician.

The time for the operations is given for information purposes, for a standard configuration.

Time for the operations: Approximately 10 minutes to perform the check in accordance with paragraph 1.G.

of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

Approximately 1 hour to replace a seat.

1.H. WEIGHT AND BALANCE Not applicable.

Revision 0 2012-05-14 Page 4/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 5OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114

1.I. EFFECT ON ELECTRICAL LOADS Not applicable.

1.J. _ SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.

1.K. REFERENCES Refer to paragraph 1.J. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

1.L. DOCUMENTS AFFECTED Not applicable.

1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Not applicable.

Revision 0 2012-05-14 Page 5/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 6OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114

2. MATERIAL INFORMATION

2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Refer to paragraph 2.A. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.

2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Refer to paragraph 2.C. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

2.D. MATERIAL TO BE RETURNED Return the material to the following address:

EADS SOGERMA Z.I. de l'arsenal BP.60109 17303 ROCHEFORT CEDEX France Tel: +33 (0)5.46.82.84.84 Fax: +33 (0)5.46.82.88.13 Revision 0 2012-05-14 Page 6/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 7OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Not applicable.

3.B. OPERATIONAL PROCEDURE Comply with paragraph 3. of the appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

3.C. IDENTIFICATION Identification of this document:

Record compliance with this ALERT SERVICE BULLETIN Revision 1 in the helicopter documents.

Identification of modifications on the equipment:

- If ALERT SERVICE BULLETIN Revision 0 was already applied, add "REV 1" at the end of "ISB 2510106-25-888 applied".

- If ALERT SERVICE BULLETIN Revision O was not applied, comply with paragraph C.IDENTIFICATION of appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1.

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

4. APPENDIX Appended EADS SOGERMA Inspection Service Bulletin No. 2510106-25-888 Revision 1 in English.

Revision 0 2012-05-14 Page 7/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 8OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114 EADS SOGERMA (F4643) z.l. de l'arsenal CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR FAX : 33.5.46.82.88.13

INSPECTION SERVICE BULLETIN TITLE : EQUIPMENT/FURNISHINGS - COCKPIT SEAT - INSPECTION OF REAR

BEAM ASSY

1. PLANNING INFORMATION A. EFFECTIVITY This service bulletin is applicable to cockpit seats P/N:

2510106-03-00 2510106-06-00 delivered from S/N 720 (included) to S/N 1451 (included).

B. CONCURRENT REQUIREMENTS None.

C. REASON

(1) History During a maintenance inspection, a seat was found with a missing welding bead on the rear beam.

(2) Objective/Action EADS SOGERMA informs the operators that an inspection of seats must be done in order to check the rear beam welding.

(3) Advantages The inspection requires no specific tool, not much time but is necessary to assure that the seats are serviceable and respect the flight safety rules.

D. DESCRIPTION This Service Bulletin gives instructions to:

- Check the rear beam welding.

- Identify the inspection.

E. APPLICATION

(1) Classification

- Mandatory F. APPROVAL The technical information contained in this Manufacturer's Service Bulletin has been approved by Eurocopter under the prerogatives awarded by the EASA Design Organization Approval No.21J.056 only for the EUROCOPTER helicopter range concerned.

INITIAL ISSUE : MAR 22/12 SB 2510106-25-888 PAGE : 1 of 8 This document is EADS SOGERMA property and can't be copied or transmitted without authorization.

Appendix Revision 0 2012-05-14 Page 8/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 9OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114 EADS SOGERMA (F4643) z.l. de l'arsenal CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR FAX: 33.5.46.82.88.13

INSPECTION SERVICE BULLETIN G. MANPOWER 1 fitter/mechanic Approximate time: 10 minutes H. WEIGHT AND BALANCE None.

1. DATA ON ELECTRICAL LOAD ANALYSIS None.

J. REFERENCES

- EADS SOGERMA CMM: 25-19-97 K. OTHER DOCUMENTS CONCERNED None.

L. INTERCHANGEABILITY OF PARTS None.

2. INFORMATION ON MATERIAL A. MATERIAL - COST AND AVAILABILITY Replacement part or return to service condition is on charge to SOGERMA B. NECESSARY MATERIAL FOR EACH EQUIPMENT None C. TOOLING Current tooling, A mirror.

INITIAL ISSUE: MAR 22/12 SB 2510106-25-888 PAGE : 2 This document is EADS SOGERMA property and can't be copied or transmitted without authorization.

Appendix Revision 0 2012-05-14 Page 9/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 10OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114 EADS SOGERMA (F4643) z.l. de l'arsenal CS. 60109 - 17303 ROCHEFORT CEDÉX - FRANCE TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR FAX: 33.5.46.82.88.13

INSPECTION SERVICE BULLETIN

3. OPERATING INSTRUCTIONS A. PRELIMINARY STEPS The work of this Service Bulletin can be done in a repair workshop or in the helicopter.

Take CMM 25-19-97 for help.

B. OPERATING PROCEDURE

(1) Inspection of the rear beam, refer to Fig. 1

(a) Check that all weld beads, showed with an arrow, are present on the rear beam.

You can use a mirror to see the weld beads if the seat is installed in the helicopter.

Whatever the seat condition, please fill up the SB report sheet and advise EADS Sogerma of seat status by e-mail.

In case of missing weld bead, two solutions apply:

- Either order a new beam 2510106601-00 on FOC basis and install it on seat in accordance with CMM 25-19-97.

- Or return affected seat assembly to EADS Sogerma shops in order to have the defective beam replaced.

Whatever the solution, a FOC PO or a repair order issue shall be requested from the customer.

INITIAL ISSUE: MAR 22/12 SB 2510106-25-888 Revision No 1 : JUL 16/12 PAGE: 3 This document is EADS SOGERMA property and can't be copied or transmitted without authorization.

Appendix Revision 0 2012-05-14 Page 10/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 11OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114 EADS SOGERMA (F4643) z.l. de l'arsenal CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE TEL : 33.5.46.82.84.84 - SITA Code : RCOSSCR FAX : 33.5.46.82.88.13

INSPECTION SERVICE BULLETIN See view D RH outside See view E RH inside See view B LH inside See view A LH outside >

INSPECTION OF THE REAR BEAM FIGURE 1 (SHEET 1 OF 3) INITIAL ISSUE: MAR 22/12 SB 2510106-25-888 Revision No 1 : JUL 16/12 PAGE: 4 This document is EADS SOGERMA property and can't be copied or transmitted without authorization.

Appendix Revision 0 2012-05-14 Page 11/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub

Page 12OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. EC155-25A114 EADS SOGERMA (F4643) z.l. de l'arsenal CS. 60109 - 17303 ROCHEFORT CEDEX - FRANCE TEL: 33.5.46.82.84.84 - SITA Code : RCOSSCR FAX: 33.5.46.82.88.13

INSPECTION SERVICE BULLETIN Weld bead View A LH outside View C (Parts disassembled only for clarity) View B LH inside Example of fault Missing weld bead found on a rear beam

INSPECTION OF THE REAR BEAM FIGURE 1 (SHEET 2 OF 3) INITIAL ISSUE: MAR 22/12 SB 2510106-25-888 Revision No 1 : JUL 16/12 PAGE: 5 This document is EADS SOGERMA property and can't be copied or transmitted without authorization.

Appendix Revision 0 2012-05-14 Page 12/15 Revision 1 2012-08-09 This document is available on the internet: www.eurocopter.com/techpub