On this page
Text · 11OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0381, the docket of AD 2022-11-18. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '75fe6af4ddc4c38b20ad19580a0beed86bb002bb269a7e9db9c1b40b2c8a4725' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '75fe6af4ddc4c38b20ad19580a0beed86bb002bb269a7e9db9c1b40b2c8a4725' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. EC155-53A040 Civil version(s): B, B1
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE FUSELAGE - Engine cowlings Inspection of the engine upper fixed cowling For the attention of Revision No. Date of issue Revision 0 2021-10-27 Summary:
The purpose of this ALERT SERVICE BULLETIN is to make sure that there is no finish paint inside the duct of the engine upper fixed cowling.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Révision 0 2021-10-27 Page 1/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters EC155, versions B and B1 with engine upper fixed cowling, P/Ns 365A58-1012-xx and delivered before the release date of revision 0 of this ALERT SERVICE BULLETIN.
NOTE 1 "xx" at the end of the P/N means all numbers.
1.A.2. Non-installed equipment or parts Engine upper fixed cowling, part number 365A58-1012-xx and delivered before the release date of revision O of this ALERT SERVICE BULLETIN.
NOTE 2 "xx" at the end of the P/N means all numbers.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Airbus Helicopters observed polyurethane finish paint on the internal side of the engine upper fixed cowling of some in-service Helicopters.
In the certified engine fixed cowling definition, all internal surfaces of the cowling are coated with primer paint only (no finish paint).
From Airbus Helicopters fire test results, the presence of polyurethane finish paint on non-ventilated surfaces may support fire propagation in case of a fire event adjacent to this area.
Consequently, the purpose of this ALERT SERVICE BULLETIN is to make sure that there is no finish paint inside the duct of the engine upper fixed cowling.
1.D. DESCRIPTION The purpose of this ALERT SERVICE BULLETIN is to:
- Do a visual check to make sure that there is no finish paint inside the duct of the engine upper fixed cowling.
- If there is finish paint inside the duct of the engine upper fixed cowling:
• Remove the engine upper fixed cowling.
. Remove the finish paint from the painted zones.
. Apply primer on the stripped zones.
. Install the engine upper fixed cowling.
Révision 0 2021-10-27 Page 2/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service Helicopters/ installed equipment or parts:
The operator must do the work on the helicopter.
Do a check of the duct of the engine upper fixed cowling, refer to paragraph 3.B.2.a. of this ALERT SERVICE BULLETIN, not more than 110 flight hours or 6 months after you received revision 0 of this ALERT SERVICE BULLETIN (refer to the issue date on the page footer).
Interpretation of results
- If there is no finish paint inside the duct of the engine upper fixed cowling (a):
. No more actions is required.
- If there is finish paint inside the duct of the engine upper fixed cowling (a):
. Obey with paragraph 3.B.2.b. not more than 6 months after you complied with paragraph 3.B.2.a. of revision 0 of this ALERT SERVICE BULLETIN.
Non-installed equipment or parts:
Before you install an engine upper fixed cowling, do a check of the stock and modify when applicable as given in paragraph 3.B.4.
1.F. APPROVAL Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on October 25, 2021 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
Révision 0 2021-10-27 Page 3/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
1.G. MANPOWER Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:
Qualification: 1 Airframe Technician.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: one hour for one Airframe Technician (only for the check).
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is one hour (excluding stripping time).
1.H. WEIGHT AND BALANCE Not applicable.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Standard Practices Manual (MTC):
MTC: 20-04-01-402: Cleaning of removed individual parts with liquid solvents - Cleaning MTC: 20-04-05-101: Painting equipments and paint touch-ups - General - Paint and primer application procedure MTC: 20-04-05-402: Application of Epoxy primer P05 - P20 - Paint and primer application procedure MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft Aircraft Maintenance Manual (AMM):
AMM: 53-54-00-061: Engine cowlings: Removal / Installation - Engine Cowlings Information Notice (IN):
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3643-1-00: Introduction of the digital Service Bulletin reporting R-Tex Révision 0 2021-10-27 Page 4/11 This document is available on the Internet: www. airb ushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Révision 0 2021-10-27 Page 5/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Not applicable.
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Consumables to be ordered separately:
Refer to the Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN and the list below:
Designation Qty Consumable P/N Item 240 to 360 Sand paper AIR Commercial reference 1 400 Sand paper AVR Commercial reference 2 Epoxy primer P20 A/R DHS186-111.40 488 3 NOTE When ordering epoxy primer P20 (DHS186-111.40/CM488), also order hardener (DHS186-111.21/CM4008) and if necessary thinner (DHS186-111.22/CM4009).
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN.
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Révision 0 2021-10-27 Page 6/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Obey with the general instructions for painting equipments and paint touch-ups, refer to the Work Card 20-04-05-101 (MTC).
- Obey with the safety instructions for a helicopter parked in a repair shop, refer to the Work Card 20-07-02-201 (MTC).
3.B. WORK STEPS
3.B.1. Preliminary steps
- Park the helicopter in a maintenance hangar.
- Disconnect all the electrical power supplies, refer to the Work Card 20-07-03-406 (MTC).
- Install the appropriate access equipment.
- Remove and/or open all cowlings, panels, doors and all equipment items to enable adequate access to the various work areas.
3.B.2. Procedure
3.B.2.a. Visual check of the inside of the duct of the engine upper fixed cowling (Figure 1, Figure 3)
- Do a visual check to make sure that there is no finish paint inside the duct of the engine upper fixed cowling (a) in the hatched zone C (Figure 1 and Figure 3, Details A and B):
. The last layer must be the P20 primer layer.
. A light spray of paint through which the primer color is still visible is considered acceptable and does not need to be stripped.
P20 primer Acceptable: P20 primer Not acceptable: P20 exposed across the primer partly covered whole surface Figure 1 - representation of P20 primer layer
- Refer to paragraph 1.E.2. for the interpretation of results.
Révision 0 2021-10-27 Page 7/11 This document is available on the Internet: www. airb ishelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
3.B.2.b. Removal of finish paint inside of the duct of the engine upper fixed cowling (Figure 3)
CAUTION
DO NOT USE ANY MECHANICAL TOOLS OR
CHEMICALS PRODUCTS TO REMOVE FINISH
PAINT INSIDE THE DUCT OF THE ENGINE FIXED COWLING (a).
USE SANDPAPER WITH AN APPROPRIATE GRIT
SIZE TO PREVENT DAMAGE WHEN YOU REMOVE
FINISH PAINT INSIDE THE DUCT OF THE ENGINE FIXED COWLING (a).
- Remove the engine upper fixed cowling (a), refer to the Task 53-54-00-061 (AMM).
- Remove the finish paint inside of the duct of the engine upper fixed cowling (a) with sand paper (1) or (2) (not shown) until the primer layer appears.
- Apply the protection on the stripped zone with epoxy primer P20 (3) refer to Figure 1 and Work Card 20-04-05-402 (MTC).
- Identify again the engine upper fixed cowling (a), refer to paragraph 3.C.
- Install the engine upper fixed cowling (a), refer to the Task 53-54-00-061 (AMM).
3.B.3. Final steps
- Set the helicopter to the flight condition.
- Do an appearance check of the helicopter after inspection or repair, refer to the Work Card 20-07-03-408 (MTC).
- Remove the access equipment.
- Connect all the electrical power supplies, refer to the Work Card 20-07-03-406 (MTC).
3.B.4. Work steps for non-installed equipment or parts Refer to Figure 2 and Figure 3
- Do a visual check to make sure that there is no finish paint inside the duct of the engine upper fixed cowling (a) in the hatched zone C (Figure 2 and Figure 3 Details A and B):
. The last layer must be the P20 primer layer.
. A light spray of paint through which the primer color is still visible is considered acceptable and does not need to be stripped P20 primer Acceptable: P20 primer Not acceptable: P20 exposed across the primer partly covered whole surface Figure 2 - representation of P20 primer layer Révision 0 2021-10-27 Page 8/11 This document is available on the Internet: www.air oushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
- If there is no finish paint inside the duct of the engine upper fixed cowling (a):
. No action is required.
- If there is finish paint inside the duct of the engine upper fixed cowling (a):
CAUTION
DO NOT USE ANY MECHANICAL TOOLS OR
CHEMICALS PRODUCTS TO REMOVE FINISH
PAINT INSIDE THE DUCT OF THE ENGINE FIXED COWLING (a).
USE SANDPAPER WITH AN APPROPRIATE GRIT
SIZE TO PREVENT DAMAGE WHEN YOU REMOVE
FINISH PAINT INSIDE THE DUCT OF THE ENGINE FIXED COWLING (a).
. Remove the finish paint inside of the duct of the engine upper fixed cowling (a) with sand paper (1) or (2) (not shown) until the primer layer appears.
• Apply the protection on the stripped zone with epoxy primer P20 (3) refer to Work Card 20-04-05-402 (MTC).
. Clean the engine upper fixed cowling (a), refer to Work Card 20-04-01-402 (MC).
. Identify again the engine upper fixed cowling (a), refer to paragraph 3.C.
3.C. RECORD OF COMPLIANCE Compliance with this document:
- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3643-1-00 for instructions):
QR-Code or hypertext link NOTE The recording compliance with ALERT SERVICE BULLETINS in the R-Tex tool does not replace the recording in the helicopter documents.
ASB EC155 53A040 Identification of modifications on equipment or parts:
Identify the engine upper fixed cowling refer to table below and Work Card 20-08-05-103 (MC).
Old P/N or Key Word New P/N MOD Marking type equivalent Engine Old P/N Old P/N Indelible ink upper fixed + ASB No. 53A040 cowling Révision 0 2021-10-27 Page 9/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Révision 0 2021-10-27 Page 10/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC155-53A040 Back to paragraphs 3.B.2.a., 3.B.2.b. and 3.B.4.
Figure 3 Révision 0 2021-10-27 Page 11/11 This document is available on the Internet: www.a helicopters.com/techpub/