Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters ASB No. EC155-63A017 Rev 0 · 17 pages · 1.0 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1036, the docket of AD 2021-03-06. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-1036 (document 0004) · AD 2021-03-06

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC155-63A017

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 17OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1036, the docket of AD 2021-03-06. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '588ac6ad81ed1313f4b9301609e604411dbbe6e98d2c6a0559954b4117364be1'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017 Civil version(s): B, B1

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE MAIN ROTOR DRIVE - Indicating Replacement of electrical magnetic plug of Main Gearbox (MGB) pump intake with non-electrical magnetic plug Corresponds to modification 0763C96 For the attention of Revision No. Date of issue Revision 0 2018-07-11 Summary:

As a complement to the protective measure put in place by ALERT SERVICE BULLETIN No. 05A034, Airbus Helicopters introduces modification 0763C96 through this ALERT SERVICE BULLETIN to improve the process and performance in collecting metal particles in the MGB. This modification replaces the electrical magnetic plug of the MGB pump intake with a non-electrical magnetic plug.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Revision 0 2018-07-11 Page 1/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters which meet all the criterias as follows:

- equipped with Main Gearbox (MGB) mentioned in paragraph 1.A.2.,

- have not embodied modification 0763C96.

NOTE 1 Refer to the Individual Inspection Log Book (RIC AMS) and/or Aircraft Log Book to identify the actual modification status of the helicopter.

PRE MOD POST MOD Non-electrical Connector to Electrical magnetic plug magnetic plug be discarded see paste pamos pue Revision 0 2018-07-11 Page 2/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

1.A.2. Non-installed equipment or parts MGB part number (P/N): 365A32-9001-00 that has not embodied modification 0763C96.

NOTE 2 Refer to the Equipment Log Card (FM) to identify the actual modification status of the MGB.

Electrical magnetic plug manufacturer part number (MP/N): 1B7807 (704A34543017).

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Following the H225 accident off Norway in April 2016, Airbus Helicopters has conducted a series of analysis to ensure safe operation of the MGB. These investigations expanded to include the MGB of the Dauphin family and subsequently led to the issuance of ALERT SERVICE BULLETIN No. 05A034.

As a complement to the protective measure put in place by ALERT SERVICE BULLETIN No. 05A034, Airbus Helicopters introduces modification 0763C96 through this ALERT SERVICE BULLETIN to improve the process and performance in collecting metal particles in the MGB. This modification replaces the electrical magnetic plug of the MGB pump intake with a non-electrical magnetic plug. This non-electrical magnetic plug is installed on the MGB pump intake in earlier versions of the Dauphin helicopters.

The replacement of this electrical magnetic plug with a non-electrical magnetic plug will ease the periodic visual inspection for engineers, and changes neither the activation logic nor the recording of the metal particles detection of the remaining electrical magnetic plugs on the MGB.

Airbus Helicopters makes compliance with Revision 0 of this ALERT SERVICE BULLETIN mandatory.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists of:

- replacing the electrical magnetic plug of the MGB pump intake with a non-electrical magnetic plug,

- modifying the wiring of the electrical particle detection system of the MGB, including disconnection anc stowage of unused wires.

NOTE 3 To replace the electrical magnetic plug, the MGB must be drained. On completion of the modification, the MGB will be filled again. A ground run-up is required to complete the filling task.

Revision 0 2018-07-11 Page 3/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:

Airbus Helicopters makes it mandatory to apply the instructions of paragraph 3. except paragraphs 3.B.6.

and 3.D. of this ALERT SERVICE BULLETIN before the delivery of the helicopter.

Non-installed equipment or parts:

Airbus Helicopters makes it mandatory to apply the instructions of paragraph 3.B.6.a. of this ALERT SERVICE BULLETIN before the delivery of the MGB mentioned in paragraph 1.A.2. of this ALERT SERVICE BULLETIN.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

The work must be performed on helicopter by the Operator.

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

Comply with paragraph 3. except paragraphs 3.B.6. and 3.D. of this ALERT SERVICE BULLETIN within 110 FH as from receipt of this ALERT SERVICE BULLETIN published at the date mentioned in the page footer and at the latest on June 30, 2019.

Non-installed equipment or parts:

The work must be performed on the MGB by the Operator.

Before installation on helicopter, modify the MGB as per paragraph 3.B.6.a. of this ALERT SERVICE BULLETIN.

Building up spare stocks of non-electrical magnetic plug for compliance with this ALERT SERVICE BULLETIN is left to the Operator's initiative.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 0763C96, which was approved on June 22, 2018 by the EASA for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 11, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Revision 0 2018-07-11 Page 4/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:

Qualification: - 1 Electrical Technician,

- 1 Mechanical Technician.

Specialist: - 1 Pilot.

The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours: - 2 hours for Electrical Technician,

- 5 hours for Mechanical Technician,

- 0.5 hours for Pilot.

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at one day.

1.H. WEIGHT AND BALANCE Change in weight and moment is negligible.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2018-07-11 Page 5/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.

Aircraft Maintenance Manual:

AMM: 24-00-00-911: General safety instructions - Electrical power AMM: 60-00-00-061: General - Removal / installation principle applicable to a part / LRU AMM: 60-00-00-911: General safety instructions - Power transmission systems AMM: 63-40-02-061: Removal / installation - MGB electrical magnetic plugs AMM: 63-40-02-721: Function Test - MGB electrical magnetic plug Safety Information Notice:

SIN: 3069-S-63: Checking procedure for magnetic plug installation and locking - Main Rotor Drive Standard Practices Manual:

MTC: 20.02.01.418: Protection of electrical wiring during maintenance operations - General MTC: 20.02.06.402: Safetying with lockwire - Safetying and locking assemblies MTC: 20.05.01.222: Application of PR 1771 B2 sealant - General sealing procedures MTC: 20.07.01.201: Handling of helicopters in a hangar and in a prepared area - Handling MTC: 20.07.02.201: Helicopter parked in a repair shop - Safety instructions MTC: 20.07.03.401: Instructions applicable during maintenance operations on mechanical assemblies - Technical instructions MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20.08.05.101: Drafting and updating the log card (FM) - General rules applicable to aircraft MTC: 20.08.05.102: Rules in force applicable for repair and maintenance of aircraft - General rules applicable to aircraft MTC: 20.09.02.901: Preservation and packing methods of airborne equipment - Preservation MTC: 20.80.20.101: Contact insertion and extraction method and tools - Electrical power MTC: 20.80.20.402: Installation and removal of cable ties - Electrical power MTC: 20.80.20.404: Backshell tightening / safetying / lossening methods - Electrical power MTC: 20.80.20.435: Quick-ty backshell assembly method - Electrical power MTC: 20.80.20.441: Installation of electrical cable bundles and optical fibres - Electrical power MTC: 20.80.20.603: Securing rules for electrical harnesses - Electrical power Revision 0 2018-07-11 Page 6/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST ENSURE THAT

ALL THE MAINTENANCE DOCUMENTS REQUIRED

FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. OTHERWISE, IT IS THE

OPERATOR'S RESPONSIBILITY TO PROCURE THE

PUBLICATIONS VIA THE USUAL AIRBUS HELICOPTERS CONTACT.

Publications to be updated:

This modification will be integrated into the following manuals:

- Aircraft Maintenance Manual (AMM),

- Flight Crew Data (FCD),

- System Description Section (SDS),

- Index of Modifications (SIM).

These documents will be circulated at a later date as per subscription.

Revisions of Illustrated Parts Catalog (IPC) and Wiring Diagram Manual (WDM) will be updated upon the customer's order.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

PRE MOD electrical magnetic plug and POST MOD non-electrical magnetic plug are not interchangeable.

PRE MOD and POST MOD MGBs are not interchangeable.

Mixability:

Not applicable.

Revision 0 2018-07-11 Page 7/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT For any information concerning price of modification kits and/or components or for assistance, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Delivery deadlines will be indicated by Sales and Customer Relations Department on Operator's request.

Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopter to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0) 4.42.85.99.96

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

Order as required:

Key Word Qty New P/N Item Old P/N → Instruction Magnetic Plug 1 365A32-7701-00 1 1B7807 Store (704A34543017) Body, Magnetic plug ref. For reference only 1a For ref only Magnetic part ref. For reference only 1b For ref only O'ring (Viton) PS701-6006-126 2 Cap 4 E0737B0816 Revision 0 2018-07-11 Page 8/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017 Equipment or parts to be ordered separately:

As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN, and as required the list below:

Key Word Qty New Item Old P/N P/N → Instruction Lockwire 0.5 m EN3628-0,8 4 Clamp 1 E0043-4A0P 5 Consumables to be ordered separately:

As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN and, as required, the list below:

Key Word Qty Product P/N Item Oil, Ester-type 0.1 L 0-148 CM 113 Oil 0.1 L NATO-0-155 CM 123 7 Grease, G-361 0.1 L DCSEA361 CM 149 8 Sealant 0.1 kg ECS2339-60 CM 6068 9 NOTE 3 Procurement of oil (6) or (7) is dependent on the type of oil used for the MGB The consumables can be ordered separately from the company KLX AEROSPACE SOLUTIONS.

Website : https://www.klxaerospace.com/klxaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888 Special tools:

As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2018-07-11 Page 9/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- Read and comply with general safety instructions on electrical power as per Task 24-00-00-911 (AMM).

- Read and comply with general instructions on removal and installation principle applicable to a part or LRU as per Task 60-00-00-061 (AMM).

- Read and comply with general safety instructions on power transmission systems as per Task 60-00-00-911 (AMM).

- Read and comply with instructions on protection of electrical wiring during maintenance operations as per Work Card 20.02.01.418 (MTC).

- Read and comply with instructions on handling of helicopters in a hangar and in a prepared area as per Work Card 20.07.01.201 (MTC).

- Read and comply with instructions on helicopters parked in a repair shop as per Work Card 20.07.02.201 (MTC).

- Read and comply with instructions applicable during maintenance operations on mechanical assemblies as per Work Card 20.07.03.401 (MTC).

- Read and comply with rules in force applicable for repair and maintenance of aircraft as per Work Card 20.08.05.102 (MTC).

- Read and comply with instructions on contact insertion and extraction method and tools as per Work Card 20.80.20.101 (MTC).

- Read and comply with instructions on backshell tightening, safetying and loosening methods as per Work Card 20.80.20.404 (MTC).

- Read and comply with instructions on quick-ty backshell assembly method as per Work Card 20.80.20.435 (MTC).

- Read and comply with instructions on installation of electrical cable bundles as per Work Card 20.80.20.441 (MTC).

- Read and comply with instructions on securing rules for electrical harnesses as per Work Card 20.80.20.603 (MTC).

3.B. WORK STEPS

3.B.1. Preliminary steps

- Park the helicopter in a maintenance hangar.

CAUTION

BEFORE WORKING ON ELECTRICAL CIRCUITS, READ TASK 24-00-00-911 (AMM).

CAUTION

BEFORE WORKING ON MECHANICAL SYSTEM, READ TASK 60-00-00-911 (AMM).

- Disconnect all electrical power supply sources.

- Install appropriate access means.

- Remove any equipment to get access to work zone, as necessary.

Revision 0 2018-07-11 Page 10/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

3.B.2. Procedure

CAUTION

WHEN WORKING ON MGB, BE CAREFUL NOT TO

SCRATCH OR DAMAGE THE MGB, OR DAMAGE ANY ADJACENT SYSTEMS.

3.B.2.a. Replacement of electrical magnetic plug of MGB pump intake with non-electrical magnetic plug (Figure 1)

3.B.2.a. 1. Removal of electrical magnetic plug (Figure 1, DETAIL A, PRE MOD)

- Remove electrical magnetic plug "81E" (a) and electrical magnetic plug body (b) as per Task 63-40-02-061, Sub-task 63-40-02-021-001 (AMM).

- Store the electrical magnetic plug "81E" (a) and the electrical magnetic plug body (b) as per Work Card 20.09.02.901 (MTC).

- Clean area.

3.B.2.a.2. Installation of non-electrical magnetic plug (Figure 1)

- Remove the magnetic part (1b) from the magnetic plug body (1a) of magnetic plug (1) (DETAIL A, POST MOD).

- Lubricate O'ring (2) with oil (6) or (7):

. make sure that the oil (6) or (7) is the same type as the oil to be filled in the MGB (c).

- Install the lubricated O ring (2) onto the magnetic plug body (1a).

- Lubricate screw thread of the magnetic plug body (1a) with grease (8).

- Install and torque-tighten the magnetic plug body (1a) on the MGB (c).

- Safety the magnetic plug body (1a) on the MGB (c) with lockwire (4) as per Work Card 20.02.06.402 (MTC) (DETAIL B).

- Apply a bead of sealant (9) along the mating surfaces between the magnetic plug body (1a) and the MGB (c) as per Work Card 20.05.01.222 (MTC) (DETAIL A, POST MOD).

CAUTION MAKE SURE THAT MAGNETIC PART (1b) IS

CORRECTLY LOCKED AS PER SAFETY INFORMATION NOTICE NO. 3069-S-63 (SIN).

- Install the magnetic part (1b) on the magnetic plug body (1a).

Revision 0 2018-07-11 Page 11/17 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-63A017

3.B.2.b. Modification of wiring of electrical particle detection system of the MGB (Figure 2)

- Disconnect connector (d) from electrical magnetic plug "79E" (e) as shown in the photograph below.

- Remove label "79E-P1" (f) from the wire harness connected to the electrical magnetic plug "79E" (e).

MAGNETIC F

CAUTION DO NOT REMOVE : WIRES "1EP24E" AND "1EP25E". DO NOT CUT THESE WIRES.

- Modify the wiring of the electrical particle detection system of the MGB from PRE MOD to POST MOD using caps (3) as shown in Figure 2:

• stow the wires "1EP24E" and "1EP25E" along existing wire routing (POST MOD),

• discard connector (g) as shown in the photograph above.

- Install the label "79E-P1" (f) on the wire harness as close as possible to the connector (d) using clamp (5) as per Work Card 20.80.20.402 (MTC) and as shown in photograph above.

- Connect the connector (d) to the electrical magnetic plug "79E" (e).

Revision 0 2018-07-11 Page 12/17 This document is available on the Internet: www.airbushelicopters.com/techpub/