Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters ASB No. EC155-71A015 Rev 0 · 13 pages · 639 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2147, the docket of AD 2025-04-09. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-2147 (document 0004) · AD 2025-04-09

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC155-71A015

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 13OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2147, the docket of AD 2025-04-09. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b659192730ae5d5cdcae2b2bd365dc8d9fd260697168d439383e53af56514e89'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015 Civil version(s): B, B1

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE POWER PLANT - Firewall Modification of the material of the firewall edging Related to modification 0771C59 For the attention of Revision No. Date of issue Revision 0 2022-10-25 Summary:

The function of this ALERT SERVICE BULLETIN is to replace the aluminum stiffener on the center firewall with a titanium stiffener in order to ensure the correct behavior of the central firewall seal in case of fire.

Compliance:

It is mandatory to comply with this ALERT SERVICE BULLETIN.

Revision 0 2022-10-25 Page 1/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

1. PLANNING INFORMATION

1.A. EFFECTIVITY

CAUTION

MAKE SURE THAT THE MODIFICATIONS

RELATED TO THIS ALERT SERVICE BULLETIN

AGREE WITH THE HELICOPTER CONFIGURATION AT THIS TIME. IF THE MODIFICATIONS DO NOT AGREE WITH THE HELICOPTER CONFIGURATION:

- PREPARE THE NECESSARY ADAPTATION WORK.

- GET THE APPROVAL BY THE APPLICABLE LOCAL AIR TRANSPORT AUTHORITIES.

- COMPLY WITH THE AIRWORTHINESS REQUIREMENTS.

THIS ALERT SERVICE BULLETIN IS WRITTEN FOR

THE INITIAL HELICOPTER CONFIGURATION

SPECIFIED IN THE INDIVIDUAL INSPECTION LOG BOOK. IT INCLUDES ONLY THE POST-DELIVERY

CONFIGURATION CHANGES WHICH ARE KNOWN AND APPROVED BY AIRBUS HELICOPTERS.

1.A.1. Helicopters/installed equipment or parts Helicopter versions B, B1 equipped with stiffener (axial U trimming) P/N: 365A58-1475-20.

1.A.2. Non-installed equipment or parts Stiffener (axial U trimming) P/N: 365A58-1475-20.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON The investigation following a fire in a left engine compartment highlighted the failure of the upper stiffener of the central firewall. This part being in aluminum, it can lead to a distortion of the firewall and a loss of tightness of the central firewall seal if submitted to a fire.

Airbus Helicopters introduces modification 0771C59 to replace the aluminum stiffener on the center firewall with a titanium stiffener in order to ensure the correct behavior of the central firewall seal in case of fire.

Revision 0 2022-10-25 Page 2/13 This document is available on the Internet: www. airb elicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

1.D. DESCRIPTION This ALERT SERVICE BULLETIN includes the work steps that follow:

- Removal of the aluminum stiffener from the engine firewall

- Installation of the titanium stiffener on the engine firewall.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:

For Airbus Helicopters, it is necessary to comply with the instructions of paragraph 3. of this ALERT SERVICE BULLETIN before the delivery of the helicopter.

Non-installed equipment or parts:

For Airbus Helicopters, it is necessary to comply with the instructions of paragraph 3. of this ALERT SERVICE BULLETIN before the delivery of the helicopter

1.E.2. Compliance in service Helicopters/installed equipment or parts:

It is the operator who does the work on the helicopter.

Comply with paragraph 3. within 600 FH or no later than within 24 months (the first limit you get to is applicable) after you received this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.

Non-installed equipment or parts:

When you receive this ALERT SERVICE BULLETIN, discard the stock of part listed in paragraph 1.A.2.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 0771059, which was approved through CRD DA07.71C59B Rev.2 on April 04, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on October 11, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Revision 0 2022-10-25 Page 3/13 This document is available on the Internet: www. airb shelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

1.G. MANPOWER Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:

Qualification: 1 Airframe Technician.

The man-hours are an estimate given for information only and for a standard helicopter configuration.

Estimated Man-hours: 7 hours for the Airframe Technician.

The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.

The estimate of the helicopter downtime is one day.

1.H. WEIGHT AND BALANCE Weight: + 0.06 kg Moment:

- Longitudinal: + 0.3 m.kg After you complete the work, record the new weight and moment in your applicable document.

1.I. POWER CONSUMPTION Not changed.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:

Standard Practices Manual (MTC):

MTC: 20-02-04-401: Installation of rivets - pitch and edge distance - Riveting MTC: 20-02-04-601: General riveting acceptance requirements - Riveting MTC: 20-02-05-401: Joining by riveting - Joining MTC: 20-02-05-404: Assembly by screws and nuts - Joining MTC: 20-02-09-101: Crack detection through dye-penetrant inspection: General MTC: 20-02-09-601: Checking structural parts / components using the dye penetrant procedure MTC: 20-03-01-102: General repair instructions - Unriveting principle - General repair instructions MTC: 20-03-02-102: Identification of standardized rivets - General rivet replacement principles MTC: 20-03-02-406: Installation of "CHERRY-MAX" ASNA 0077 and 0078 rivets - General rivet replacement principles MTC: 20-04-05-402: Application of Primer EPOXY P05-P20 - Paint and primer application procedure Revision 0 2022-10-25 Page 4/13 This document is available on the Internet: www. airb elicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015 MTC: 20-05-01-222: Application of PR 1771 B2 sealant - General sealing procedures MTC: 20-05-01-227: Application of Jointing Compound CA 1010 - General sealing procedures MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions MTC: 20-07-03-408: Appearance checks on an aircraft after inspection or repair - Technical instructions MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft Aircraft Maintenance Manual (AMM):

AMM: 53-54-00-061: Removal / Installation - Engine Cowlings AMM: 71-30-00-961: Replacement of Cowlings Seals on Firewall Information Notice (IN):

IN 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight IN 3686-1-00: Publishing of complementary Instructions for Continued Airworthiness through Delivery Notes

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST MAKE SURE

THAT ALL THE MAINTENANCE DOCUMENTS

NECESSARY FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF THEY ARE

AVAILABLE, THE OPERATOR MUST

CONTACT AIRBUS HELICOPTERS TO GET THESE DOCUMENTS.

The changes to Instructions for Continued Airworthiness (ICA) which are required as a result of this ALERT SERVICE BULLETIN will be incorporated in the next Normal Revision.

Refer to DN.105.0003.0 until the information is available in the published technical documentation.

NOTE You can find more information about Delivery Notes in Information Notice IN 3686-1-00.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

PRE MOD and POST MOD components are not interchangeable.

Mixability:

This ALERT SERVICE BULLETIN has no effect on mixability.

Revision 0 2022-10-25 Page 5/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Contact the Sales and Customer Relations Department to know the delivery lead times.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2022-10-25 Page 6/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

Former Key Word Qty New Reference Item Reference → Instruction FIREWALL 365A07-71C5-9272

RETROFIT KIT Stiffener 365A58-1475-2151 1 365A58-1475-20 Discard Rivet blind NAS1398C3-1 2 Hex. head bolt 17 22125TK050012X Washer 17 23111CA050 4 Self-locking hex. nut 17 ASN52320BH050N 5 Equipment or parts to be ordered separately:

Former Key Word Qty New Reference Item Reference → Instruction Bracket 365A58-1102-NY 12 Replace if in unsatisfactory condition Rivet (blind) 2 ASNA0078E403 13 Consumables to be ordered separately:

Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN or use equivalents.

Key Word Qty Reference Item Interposition sealant 0.25 L ECS7009 CM518 11 Sealing compound 0.25 L ECS0045-3232 CM6068 14 You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering (IN 3481-1-00).

If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Refer to the Tasks and Work Cards identified in this ALERT SERVICE BULLETIN or use equivalents.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2022-10-25 Page 7/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- Comply with the general instructions on the installation of rivets, pitch and edge distance. Refer to Work Card 20-02-04-401 (MTC).

- Comply with the general riveting acceptance requirements. Refer to Work Card 20-02-04-601 (MTC).

- Comply with the general crack detection instructions with dye-penetrant. Refer to Work Card 20-02-09-101 (MTC)

- Comply with the general checking procedure on the structural parts / components with dye-penetrant.

Refer to Work Card 20-02-09-601 (MTC).

- Comply with the general instructions to join by riveting. Refer to Work Card 20-02-05-401 (MTC).

- Comply with the general instructions on the identification of standardized rivets. Refer to Work Card 20-03-02-102 (MTC).

Unless specified differently, tighten the bolts to the standard torque. Refer to Work Card 20-02-05-404 (MTC).

3.B. WORK STEPS

CAUTION

MAKE SURE THAT YOU PREVENT ALL POSSIBLE FOREIN OBJECT DAMAGE (FOD).

3.B.1. Preliminary steps

- Park the helicopter in a hangar. Refer to Work Card 20-07-02-201 (MTC).

- Disconnect all the electrical power supplies.

- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to the different work areas

- Remove the cowlings and fairings. Refer to Task 53-54-00-061 (AMM).

3.B.2. Procedure NOTE 1 Cutout and drilling: Work Card 20-04-04-401 (MTC) gives information on deburring and protection.

NOTE 2 Paint touch-ups are the responsibility of the operator. You will find information in Work Card 20-04-05-402 (MTC).

Revision 0 2022-10-25 Page 8/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

3.B.2.a. Removal of the aluminum stiffener from the firewall (Figure 1) Refer to DETAIL A, DETAIL C, DETAIL D and DETAIL E:

- Remove the rivets (c) from the stiffener (a). Refer to Work Card 20-03-01-102 (MTC).

- If the center rivet (d) is installed on the gusset (e) (DETAIL C):

. Remove the rivet (d). Refer to Work Card 20-03-01-102 (MTC).

- Remove and discard (DETAIL B):

• The stiffener (a) . The bolts (b) The washers (i)

• The nuts (k).

- Remove and keep (DETAIL A, DETAIL B):

. The cover strip (g)

• The clamps (m).

- If the bracket (f) is in unsatisfactory condition (DETAIL D):

• Remove the rivet (n)

• Remove and discard the bracket (f).

3.B.2.b. Installation of the titanium stiffener on the firewall (Figure 2)

- Put in position the stiffener (1) on the firewall to agree with the existing holes.

- If there is a hole (A) on the gusset (e) (DETAIL A):

. Counter-drill the hole (A) to 2.4 mm diameter on the stiffener (1).

- Counterdrill the holes (B) to 5,5 mm diameter to agree with the existing firewall holes.

- Counterdrill the holes (C) to 2,4 mm diameter to agree with the existing firewall holes.

- Deburr and apply protection with interposition sealant (11) to the holes (A), (B) and (C).

Refer to Work Card 20-05-01-227 (MTC).

- If the bracket (f) is removed:

• Replace it with a new bracket (12) (SECTION B-B). Refer to paragraph 2.C.

. Install the new bracket (12) on the firewall with rivets (13).

- Install all the rivets (2) on the stiffener (1), the gusset (e) and the bracket (12) or (f) with the sealing compound (14) (DETAIL A and DETAIL C).

Refer to Work Card 20-03-02-406 (MTC) and Work Card 20-05-01-222 (MTC).

- Do a check of the cover strip (g) and the fireproof seal (h) to replace if necessary (SECTION B-B).

Refer to Work Card 71-30-10-702 (AMM).

- Install the stiffener (1), the cover strip (g) and the seal (h) (DETAIL A, DETAIL C and SECTION B-B) with:

• The bolts (3) . The washers (4) . The nuts (5) The clamps (m) (not shown) . The sealing compound (14). Refer to Work Card 20-05-01-222 (MTC).

Revision 0 2022-10-25 Page 9/13 This document is available on the Internet: www.airbu shelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

CAUTION

MAKE SURE THAT THE ENGINE FIXED COWLING IS IN CONTACT WITH THE FIREPROOF SEAL (h).

IF NECESSARY, ADJUST THE POSITION OF THE SEAL (h).

- Tighten the bolts (3) to the standard torque.

3.B.3. Final steps

- Clean and apply the close-up procedure to the work areas and the helicopter.

Refer to Work Card 20-07-03-408 (MTC).

- Install or close all cowlings, panels, doors and items of equipment that you removed and/or opened during the preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).

- Install the cowlings and fairings. Refer to Task 53-54-00-061 (AMM).

- Remove the access equipment.

- Connect all the electrical power supplies.

- Set the helicopter to flight condition.

3.C. RECORD OF COMPLIANCE Compliance with this document:

- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

- Record the full compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):

QR code or hypertext link NOTE 3 The recording of compliance with ALERT SERVICE BULLETINS in the SB Insight tool does not replace the recording in the helicopter documents.

ASB EC155-71A015 Tracking of modifications in the documentation:

Record the modification 0771C59 in the helicopter documents.

Identification of modifications on equipment or parts:

Identify the parts. Refer to the table below and Work Card 20-08-05-103 (MTC).

Key Word Former P/N New Reference MOD Marking type Firewall 365A58-1450-0702 365A58-1450-0703 0771C59 Indelible ink

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Revision 0 2022-10-25 Page 10/13 This document is available on the Internet: www. airb shelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015

PRE MOD D m Back to paragraph 3.B.2.a.

Figure 1 Revision 0 2022-10-25 Page 11/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS No. EC155-71A015 PAGE КЕРТ BLANK DELIBERATELY Revision 0 2022-10-25 Page 12/13 This document is available on the Internet: www.airbushelicopters.com/techpub/