Service bulletin · Airbus Helicopters

No revision namedAirbus ASB EC225-33A018 Rev 0 · 36 pages · 2.1 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2663, the docket of AD 2025-10-02. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-2663 (document 0004) · AD 2025-10-02

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC225-33A018

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 36OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2024-2663, the docket of AD 2025-10-02. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '7243b058985af6208e383639d532ef047af57856f0347fa6937ca7550a18061c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018 Civil version(s): LP

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE

LIGHT - LANDING LIGHT Metallisation landing search light Corresponds to modification MC29201 For the attention of Revision No. Date of issue Revision 0 2022-12-15 Summary:

The purpose of this ALERT SERVICE BULLETIN is to install an electrical bonding braid on the search lights under sponson.

Compliance:

It is mandatory to comply with this ALERT SERVICE BULLETIN.

Helicopters : 2725, 2739, 2744, 2750, 2781, 2786, 2854, 2883, 2885, 2892, 2901, 2910, 2914, 2918, 2921, 2922, 2924, 2930, 2986, 2987, 2994, 3001, 3005, 3006, 3009, 3011, 3014, 3015, 3018, 3021 and 3029 Revision 0 2022-12-15 Page 1/36

Page 2OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

1. PLANNING INFORMATION

CAUTION

MAKE SURE THAT THE MODIFICATIONS

RELATED TO THIS ALERT SERVICE BULLETIN

AGREE WITH THE HELICOPTER CONFIGURATION AT THIS TIME. IF THE MODIFICATIONS DO NOT AGREE WITH THE HELICOPTER CONFIGURATION:

- PREPARE THE NECESSARY ADAPTATION WORK.

- GET THE APPROVAL BY THE APPLICABLE LOCAL AIR TRANSPORT AUTHORITIES.

- COMPLY WITH THE AIRWORTHINESS REQUIREMENTS.

THIS ALERT SERVICE BULLETIN IS WRITTEN FOR

THE INITIAL HELICOPTER CONFIGURATION

SPECIFIED IN THE INDIVIDUAL INSPECTION LOG BOOK. IT INCLUDES ONLY THE POST-DELIVERY

CONFIGURATION CHANGES WHICH ARE KNOWN AND APPROVED BY AIRBUS HELICOPTERS.

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters with a serial number identified on page 1, equipped with the light MP/N 4307405 (704A46820034) and PRE MOD MC29201.

NOTA 1 The applicable configurations are defined in Appendix 4.

Refer to the serial numbers.

NOTA 2 Refer to the Individual Inspection Logbook (RIC AMS) to identify the modification status of the helicopter.

1.A.2. Non-installed equipment or parts Plug Mounting MP/N 332P64-2648-23 Plate MP/N 332P64-2648-24

1.B. ASSOCIATED REQUIREMENTS Not applicable.

Revision 0 2022-12-15 Page 2/36

Page 3OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

1.C. REASON In the framework of a new development project, design office department has identified absence of bonding braids of the additional and optional search light installed on some helicopters (optional equipment).

The location of the additional and optional search light under the sponsons constitutes a possible area of attachment of the lightning. If lightning strikes the search light, this lightning shall be evacuated on the aircraft structure.

However, the additional and optional search light is completely isolated from the metallic structure, because sponsons are made of composite material (non-metallic structure). The electrical shielding (when present) will not be sufficient to drain the current.

High current could circulate into the helicopter electrical network and damage some equipment and/or structure, but also electrical generation system.

The purpose of this ALERT SERVICE BULLETIN is to install an electrical bonding braid on the search lights under sponson.

1.D. DESCRIPTION The function of this ALERT SERVICE BULLETIN is to:

- Modify of the "747VC" connectors

- Modify the structure

- Install the electrical bonding braid

- Modify the harness on the landing search lights under sponson.

POST MOD New metallic braids Revision 0 2022-12-15 Page 3/36

Page 4OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:

Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3.B. of this ALERT SERVICE BULLETIN before the delivery of the helicopter (or the equipment).

Non-installed equipment or parts:

Not applicable.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

It is the operator who does the work on the helicopter.

Paragraphs CONFIGURATION 1 CONFIGURATION 2

3.B.2.a.

3.B.2.b.1.

3.B.2.b.2

3.B.2.c.1.

3.B.2. c.2.

3.B.2.d.

Comply with paragraph 3.B. not more than 1320 flight hours or 24 months and 73 days (the first limit you get to is applicable) after you received this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.

Non-installed equipment or parts:

It is the operator who makes the decision on the level of stock related to the compliance with this ALERT SERVICE BULLETIN. Refer to paragraph 3.B.5.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification SPMC.29201 approved on June 16, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on November 23, 2022 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Revision 0 2022-12-15 Page 4/36

Page 5OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

1.G. MANPOWER * Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have these qualifications:

Qualifications:

- 1 Airframe Technician

- 1 Electrical Technician.

The man-hours are an estimate given for information only and for a standard helicopter configuration.

Estimated Man-hours:

- 8 hours for Airframe Technician

- 6 hours for Electrical Technician.

The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.

The estimate of the helicopter downtime is 2 days.

1.H. WEIGHT AND BALANCE There is no change in weight and moment.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:

Aircraft Maintenance Manual (MMA):

MMA: 24-00-00-611: General Instruction - GENERAL MMA: 33-43-08-061: Removal - Installation - SWIVEL LIGHTS UNDERNEATH MULTIPURPOSE

SPONSONS MMA: 33-43-08-721: Functional Tests - SWIVEL LIGHTS UNDERNEATH MULTIPURPOSE SPONSONS MMA: 53-00-00-611: General Standard Maintenance - GENERAL Standard Practices Manual (MTC):

MTC: 20-01-01-310: Use of sealing compounds - Miscellaneous products used on helicopters MTC: 20-02-05-404: Assembly by screws and nuts - joining MTC: 20-02-05-601: Checking self-locking nuts and screw - joining MTC: 20-02-06-409: Safetying with Loctite compound - Safetying and locking assemblies MTC: 20-02-07-101: Electrical bonding: General - Electrical bonding MTC: 20-02-07-401: Electrical bonding procedure - Electrical bonding MTC: 20-02-07-405: Use of CHO-BOND 1038 - Electrical bonding MTC: 20-06-01-420: Application of BETAMATE 7120 - Bonding with adhesives MTC: 20-06-04-305: Application of mixtures No. 16 and 17 - Use of bonding mixture MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instruction Revision 0 2022-12-15 Page 5/36

Page 6OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018 MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-103: Monitoring of parts in operation - marking service life customization - General rules applicable to aircraft.

MTC: 20-80-20-101: Contact Insertion and Extraction Method and Tools - Standard Practices - Electrical Power MTC: 20-80-20-402: Installation / Removal of Cable Ties - Standard Practices - Electrical Power MTC: 20-80-20-407: Tools and Processes for Stripping Cables - Standard Practices - Electrical Power MTC: 20-80-20-408: Method for crimping of electrical contacts for a connector - Standard Practices - MTC: 20-80-20-422: Methods for Finishing the Back of Connectors or Bulkhead Feed-through Connectors - MTC: 20-80-20-425: Tools and Settings Associated with the Crimping of Contacts - Standard Practices - MTC: 20-80-20-449: Protection of electrical wiring during maintenance operations - Standard Practice - MTC: 20-80-20-603: Securing Rules for Electrical Harnesses - Standard Practices - Electrical Power MTC: 20-80-20-604: Inspection of the crimping of contacts - Standard Practices - Electrical Power MTC: 20-80-20-605: Application and Check of Tightening Torques on electrical connections - Information Notice (IN):

IN: 3481-1-00: The Marketplace: an Airbusworld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting SB Insight

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS

ALERT SERVICE BULLETIN, THE OPERATOR

MUST MAKE SURE THAT ALL THE MAINTENANCE DOCUMENTS NECESSARY FOR • THE

MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF THEY ARE NOT AVAILABLE,

THE OPERATOR MUST CONTACT

AIRBUS HELICOPTERS TO GET THESE DOCUMENTS.

The manual shown below is updated with the modification:

Aircraft Maintenance Manual (AMM).

Airbus Helicopters will update the documents shown below when the customer orders it:

- Illustrated Parts Catalog (IPC)

- Wiring Diagram Manual (WDM).

You will receive the documents to which you subscribe.

The ALERT SERVICE BULLETIN content for parts catalog information and wiring diagram information has to be considered as Instructions for Continued Airworthiness (ICA).

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2022-12-15 Page 6/36

Page 7OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.

The Airbus Helicopters Program Department will do the tasks and/or supply the components free of charge.

Availability Contact the Sales and Customer Relations Department to know the delivery lead times.

Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:

- The mode of transport

- The destination

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2022-12-15 Page 7/36

Page 8OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

Former Key Word Qty New P/N Item Instruction P/N→ Retrofit head light equipped 332MC2-9201-0071 kit (including) Support 6 ECS0792A012A 1 Bolt 2 22125BC050028L 4 Washer 23111AG050LE 5 Nut 4 ASN52320BH050N 6 Bolt 2 22125BC050014L 7 Bonding braid 2 332A55-2046-01 9 Lug (round not insul) 2 NSA936507TG0808 10 Connector 2 EN3645JOCN26BN 14 (Straight) cable outlet 2 EN3660-017A2C11 15 Cable outlet 2 EN3660-017A2C13 16 Contact 12 EN3155-009F2222 17 Contact 4 EN3155-009F1212 18 (Heat) shrinkable sleev 4 E0718-02-30 19 Connector 2 EN3645JOBN35BN 20 Plug (hi-tak seal T.12) 2 332A61-6454-22 21 Plug (hi-tak seal T.14) 2 332A61-6454-23 22 Harness LH light 332P60-1729-22AA 23 Harness RH light 332P60-1730-22AA 24 Harness RH (light 58LM2) 332A60-2991-22AA 25 Harness LH (light 58LM1) 1 332A60-2990-22AA 26 Screw 16 22272BC030012L 27 Back plate 2 DHS737-112.03 28 Back plate 2 DHS737-112.04 29 Revision 0 2022-12-15 Page 8/36

Page 9OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018 Equipment or parts to be ordered separately:

CONFIGURATION 1 Former Key Word Qty New P/N Item Instruction P/N—→ Bonding braid 993109-204-5 2 Bonding braid 1 993109-255-5 3 Set of labels 332P08-4290-0099 8 Heat-Shrink Tubing 1 m VG95343T05E003A 11 Screw 2 22201BC060008L 12 See NOTA 1 Set of labels 332A64-3191-0099 30 NOTA 1 The screws (12) are ordered following the depth of penetration in the insert. Refer to paragraph 3.B.2.c.

CONFIGURATION 2 Key Word Qty New P/N Item Former P/N— Instruction Set of labels 1 332P08-4290-0099 8 Heat-Shrink Tubing 1 m VG95343T05E003A 11 Screw 2 22201BC060008L 12 See NOTA 2 Braid bonding 2 993109-305-5 13 Set of labels 1 332A64-3191-0099 30 NOTA 2 The screws (12) are ordered following the depth of penetration in the insert. Refer to paragraph 3.B.2.c.

Revision 0 2022-12-15 Page 9/36

Page 10OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018 Consumables to be ordered separately:

Refer to Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN and the list below:

CONFIGURATION 1 Consumable Key word Qty CM Item _P/N Primer 1L ECS0091-1126 6081 32 Sealing compound 1L ECS0091-1178 6077 33 Conductive sealant 1 Kg ECS2129.10 6073 34 Micro-Balloon Powder 1 Kg BJO-0930 7931 35 Adhesive past 1 L ECS0044-1032 616 36 CONFIGURATION 2 Key word Qty Consumable _P/N Item Primer 1L ECS0091-1126 6081 32 Sealing compound 1L ECS0091-1178 6077 33 Conductive sealant 1 Kg ECS2129.10 6073 34 You can send an order for the consumables from the AirbusWorld Marketplace through e-ordering (IN 3481-1-00).

If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Refer to Tasks and Work Cards mentioned in this ALERT SERVICE BULLETIN.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2022-12-15 Page 10/36

Page 11OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- Comply with the general instruction. Refer to Task 24-00-00-611 (MMA).

- Comply with the general standard instruction. Refer to Task 53-00-00-611 (MMA).

- Comply with the instruction of sealing compound. Refer to Work Card 20-01-01-310 (MTC).

- Comply with the instruction of assembly by screws and nuts. Refer to Work Card 20-02-05-404 (MTC).

- Comply with the instruction for checking self-locking nuts and screw. Refer to Work Card 20-02-05-601 (MTC).

- Comply with the instruction of safetying with Loctite compound. Refer to Work Card 20-02-06-409 (MTC).

- Comply with the instruction for electrical bonding: General. Refer to Work Card 20-02-07-101 (MTC).

- Comply with the instruction for electrical bonding procedure. Refer to Work Card 20-02-07-401 (MTC).

- Comply with the instruction of CHO-BOND 1038. Refer to Work Card 20-02-07-405 (MTC).

- Comply with the instruction on application of BETAMATE 7120. Refer to Work Card 20-06-01-420 (MTC).

- Comply with the instruction on application of mixtures No. 16 and 17. Refer to Work Card 20-06-04-305 (MTC).

- Comply with the instruction for contact Insertion and Extraction Method and Tools. Refer to Work Card 20-80-20-101 (MTC).

- Comply with the instruction on installation / Removal of Cable Ties - Standard Practices. Refer to Work Card 20-80-20-402 (MTC).

- Comply with the instruction for Tools and Processes for Stripping Cables. Refer to Work Card 20-80-20-407 (MTC).

- Comply with the instruction for method for crimping of electrical contacts for a connector. Refer to Work Card 20-80-20-408 (MTC).

- Comply with the instruction for the methods for Finishing the Back of Connectors or Bulkhead Feed through Connectors. Refer to Work Card 20-80-20-422 (MTC).

- Comply with the instruction for Tools and Settings Associated with the Crimping of Contacts. Refer to Work Card 20-80-20-425 (MTC).

- Comply with the instruction for securing Rules for Electrical Harnesses. Refer to Work Card 20-80-20-603 (MTC).

- Comply with the instruction for inspection of the crimping of contacts. Refer to Work Card 20-80-20-604 (MTC).

- Comply with the instruction on application and Check of Tightening Torques on electrical connections.

Refer to Work Card 20-80-20-605 (MTC).

3.B. WORK STEPS

CAUTION

MAKE SURE THAT YOU PREVENT ALL POSSIBLE FOREIGN OBJECT DEBRIS (FOD).

3.B.1. Preliminary steps

- Park the helicopter in a maintenance hangar. Refer to Work Card 20-07-02-201 (MTC).

- Install appropriate access equipment.

- Remove and/or open all applicable cowlings, panels, doors and other items of equipment to get access to the different work areas.

- Disconnect all the electrical power supplies.

- Protect the electrical wiring in the work area. Refer to the Work Card 20-80-20-449 (MTC).

Revision 0 2022-12-15 Page 11/36

Page 12OCROpen in PDF

AIRBUS HELICOPTERS No. EC225-33A018

3.B.2. Procedure

3.B.2.a. Modification of the "747VC" connectors (Figure 1, Figure 2 and Figure 3)

- Remove and discard the RH harness (e) and the LH harness (f). Refer to Task 33-43-08-061 (MMA) (Figure 3 - Details A and B).

- Remove and discard (Figure 1):

• The labels (a) . The back plates (b) and (d) . The hardwares (c).

- Install (Figure 2):

• The plugs (21) and (22) . The plates (28) and (29) . The screw (27) . The harnesses LH light (23) and RH light (24) (Figure 3).

- Do the electrical bonding.

- Bond the label "747VC1", "747VC2", "747VC3" and "747VC4" of the set of labels (30).

- Install the LH harness (26) and the RH harness (25) (Figure 3).

3.B.2.b. Modification of the structure (Figure 4 and Figure 5)

3.B.2.b.1. Modification of the structure (Figure 4 and Figure 5) (CONFIGURATION 1)

- Remove and keep. Refer to Task 33-43-08-061 (MMA) (Figure 4):

• The plate (g) . The shim (h) . The light i)

• The plug mounting (k).

- Remove and discard the insert (m) (Figure 5 - SECTION A-A PRE MOD).

- On the plate (g) (Figure 4 - Detail B):

. Locate the hole (A) in accordance to the position.

. Drill the hole (A) to the diameter of 5.5 mm.

• Paint strip the hole (A) to a diameter of 10 mm on the both face.

• Identify again the plate (g). Refer to paragraph 3.C.

- Locate the holes (B) on (Figure 4 - Details B, C, D):

. The plate (g)

• The shim (h) . The light (j).

- Paint strip the holes (B) to a diameter of 12 mm on the both face.

- On the plug mounting (k) (Figure 4 - Detail E):

• Remove the connectors (n).

Locate the hole (C).

. Fill the hole (C) with the powder (35) and adhesive (36) (Figure 5 - SECTION A-A POST MOD).

. Drill the hole (C) to a diameter of 5.5 mm.

• Paint strip the hole (C) to a diameter of 10 mm.

• Paint strip the plug mounting (k) on opposite face in accordance to the dimensions.

Identify again the plug mounting (k). Refer to paragraph 3.C.

Revision 0 2022-12-15 Page 12/36