On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 76OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-1736; AD 2025-23-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'cec410e6955b586e51e86dc7a7f0d5a8f3b9e66c26fa2bb83bd0b2375523ae4e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'cec410e6955b586e51e86dc7a7f0d5a8f3b9e66c26fa2bb83bd0b2375523ae4e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. EC225-53A065 Civil version(s): LP
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE FUSELAGE - Bracket and support assembly New link of the suspension bar attachment brackets of the Main Gear Box (MGB) Corresponds to modifications 0728521, 0728904, 0728496 and 0729044 For the attention of Revision No. Date de diffusion Revision 0 2021-08-19 Revision 1 2022-01-06 Revision 2 2022-05-05 Revision 3 2023-06-15 Revision 4 2024-05-28 Summary:
The purpose of this ALERT SERVICE BULLETIN is to improve the link of the MGB suspension bar attachment brackets.
Reason for last revision:
The purpose of revision 4 of this ALERT SERVICE BULLETIN is to add more details on paragraph 1.E.2.
These details allow to make sure that the right shim and washer are installed according to the configuration of the helicopter.
Compliance:
It is mandatory to comply with this ALERT SERVICE BULLETIN.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR Revision 0 2021-08-19 Page 1/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters PRE MOD 0728496.
NOTE 1 Modification 0728496 consists in installing new MGB suspension bar attachment bracket links on the X3855 and X5295 frames.
NOTE 2 Refer to the Individual Inspection Log Book (RIC AMS) to identify the current modification status of the helicopter.
Helicopters which have already complied with former revisions of this ALERT SERVICE BULLETIN are concerned by revision 3 of this ALERT SERVICE BULLETIN.
For the operators who complied with revision 3 of this ALERT SERVICE BULLETIN, compliance with revision 4 is not necessary.
1.A.2. Non-installed equipment or parts Not applicable.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Revision O A reduction in tightening torque was observed during the tightening torque check on the attachment nuts of the MGB suspension bar attachment brackets.
Airbus Helicopters implemented a protective measure through ALERT SERVICE BULLETIN No. 04A013, "Periodic replacement of the Main Gearbox (MGB) suspension bar attachment pins "which consisted in applying a coefficient to the flight hours of the bracket attachment bolts of the MGB suspension bars.
Airbus Helicopters developed an improvement which consists in installing new links on the attachment brackets of the MGB suspension bars through the following four modifications, 0728521, 0728904, 0728496 and 0729044.
Table No. 1 takes into account the different existing configurations.
The installation of longer bolts combined with cylindrical bobbins will allow for easier torque tightening and will improve durability.
In time, the checking time limit for toque tightening will be increased to align with the inspection at 1320 hours.
The embodiment of this modification will enable the checking interval to be extended for the tightening torques of this coupling.
Revision O 2021-08-19 Page 2/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 Compliance with this ALERT SERVICE BULLETIN cancels the directives of ALERT SERVICE BULLETIN No. 04A013 "Periodic replacement of the Main Gearbox (MGB) suspension bar attachment pins ".
Revision 1 The purpose of revision 1 of this ALERT SERVICE BULLETIN is to:
- Change this Service Bulletin in an ALERT SERVICE BULLETIN, mainly because it introduces mandatory limits (SLL).
- Add updates in the Service Life Limits (SLL).
- Take into account customers feedbacks.
- Delete the paragraph 1.B. because the systematic replacement of the front bracket screws in this ALERT SERVICE BULLETIN cancels the add-on factors complied through the ALERT SERVICE BULLETIN No. 04A013.
Revision 1 of this ALERT SERVICE BULLETIN has an effect on the execution of the Revision 0 of this ALERT SERVICE BULLETIN.
Revision 2 The purpose of revision 2 of this ALERT SERVICE BULLETIN is to update the nominal torque value of the nuts (9) of the new screw of the forward bracket attachment.
This update has been made as a result of customer's feedback.
Revision 2 of this ALERT SERVICE BULLETIN has no effect on the execution of the previous revisions of this ALERT SERVICE BULLETIN.
Revision 3 The purpose of revision 3 of this ALERT SERVICE BULLETIN is to take into account the:
- Design modifications: add the MP/N of missing front plate old reference (332A22-1667-22) and renumbered reference (332A08-1729-67) in chapter 3.C.
- ALS and Working card present in the previous revision integrated in technical publication
- New process tech Data publication: new front plate reference added in the ALS through a dedicated Delivery Note
- Customer's feedback: update the paragraph 2.C., the procedures and the figures.
The following paragraphs have been deleted because they are now integrated in the documentations:
- Appendix 4.C.: Service Life Limit (SLL) of the front plate and new pins, integrated in the ALS RN 014 of 2022-06-01
- Appendix 4.D.: Check of tightening torques of the forward and AFT attachment pins, integrated in the ALS RN 014 of 2022-06-01
- Appendix 4.E.: Procedure to check of tightening torques, integrated in the MMA RN 023 of 2022-06-01 with the revised Task 53-26-00-212 (MMA).
The new front plate reference is added in the ALS through a dedicated Delivery Note. Refer to the paragraph 1.L.
Revision 3 of this ALERT SERVICE BULLETIN has an effect on the execution of the previous revisions of this ALERT SERVICE BULLETIN.
Revision 0 2021-08-19 Page 3/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 Revision 4 The purpose of revision 4 of this ALERT SERVICE BULLETIN is to add more details on paragraph 1.E.2.
These details allow to make sure that the right shim and washer are installed according to the configuration of the helicopter.
Revision 4 of this ALERT SERVICE BULLETIN has no effect on the execution of the revision 3 of this ALERT SERVICE BULLETIN.
1.D. DESCRIPTION Modification 0728521 consists in making a cutout in the X3855 frame to make it possible to install the new MGB bracket attachment screws.
Modification 0728904 consists in replacing the attachment gussets to the LH and the RH of the 26° beam on the X5295 frame to avoid interference with the new attachment screw of the MGB brackets.
Modification 0728496 consists in:
- removing the MGB attachment brackets,
- installing the MGB attachment brackets using new bolts, washers, shims, cylindrical bobbins, linings, nuts and pins,
- Creating a Log Card (FM) to implement a Service Life Limit (SLL) for the front plate.
- Returning the feedback sheet.
Modification 0729044 consists in adding new shims on the LH and the RH sides of the rails of the rear sliding cowling to avoid interference between the cowling and the new screws of the new links on the attachment brackets of the MGB suspension bars.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:
Airbus Helicopters recommends compliance with the instructions in paragraph 3. of this ALERT SERVICE BULLETIN as per operational and contractual constraints.
Non-installed equipment or parts:
Not applicable.
1.E.2. Compliance in service The work must be performed on the helicopter by the operator.
Revision 0 2021-08-19 Page 4/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 Helicopters/installed equipment or parts:
Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3. of this ALERT SERVICE BULLETIN, issued on the date indicated in the page footer, within 1320 flight hours or 40 months (the first limit reached is applicable) from receipt of revision 0 of this ALERT SERVICE BULLETIN as per table No. 1 below:
Table No. 1 Helicopter configuration Paragraph to comply with PRE MOD 0728521 Configuration No. 1 PRE MOD 0728904 Comply with paragraph 3.
PRE MOD 0729044 Configuration No. 2 POST MOD 0729044 PRE MOD 0728521 PRE MOD 0728904 Comply with paragraph 3. except for paragraph 3.B.2.c.
PRE MOD 0728521 Configuration No. 3 POST MOD 0728904 POST MOD 0729044 Comply with paragraph 3. except for paragraphs 3.B.2.b. and 3.B.2.c.
POST MOD 0728521 Configuration No. 4 POST MOD 0728904 Comply with paragraph 3. except for PRE MOD 0729044 paragraphs 3.B.2.a. and 3.B.2.b.
PRE MOD 0728521 Configuration No. 5 POST MOD 0728904 Comply with paragraph 3. except for PRE MOD 0729044 paragraph 3.B.2.b.
POST MOD 0728521 Configuration No. 6 PRE MOD 0728904 Comply with paragraph 3. except for POST MOD 0729044 paragraphs 3.B.2.a. and 3.B.2.c.
POST MOD 0728521 Configuration No. 7 PRE MOD 0728904 Comply with paragraph 3. except for PRE MOD 0729044 paragraph 3.B.2.a.
POST MOD 0728521 Comply with paragraph 3. except for Configuration No. 8 POST MOD 0728904 paragraphs 3.B.2.a., 3.B.2.b. and POST MOD 0729044 3.B.2.c.
For helicopters which have not complied with the former revisions of this ALERT SERVICE BULLETIN, comply with paragraph 3.B. of this ALERT SERVICE BULLETIN except paragraphs 3.B.2.c. 1.b. and
3.B.2.C.2.b.
Configurations No. 1, 4, 5 and 7:
For helicopters which have not complied with Revision 3 but complied with at least one of the previous revisions of this ALERT SERVICE BULLETIN:
- Comply with paragraph 3.B.2.c.1.b. (PRE MOD 0726238) during the next scheduled maintenance inspection without exceeding 40 months after you received this ALERT SERVICE BULLETIN revision 0.
Or
- Comply with paragraph 3.B.2.c.2.b. (POST MOD 0726238) during the next scheduled maintenance inspection without exceeding 40 months after you received this ALERT SERVICE BULLETIN revision 0.
NOTE 3 For the helicopters who comply with the previous revisions, apply the corrected tightening torque on the fixing screws of the front fitting as shown in figure 4 at the next "T" maintenance in accordance with the ALS.
Revision 0 2021-08-19 Page 5/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 Non-installed equipment or parts:
Not applicable.
1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.
For helicopters operated outside the terrain regulated by the EASA, the application of this document is subject to validation provided by the responsible aviation authority of the state of registry.
The technical content of this document is approved under the prerogatives of the recognition of design capability ref. FRA21J-002-DGA for French Government helicopters.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:
Qualification: - 1 Airframe Technician for the cutout of the X.3855 frame, the installation of the attachment gussets and the installation of the shims on the rails of the sliding cowling,
- 2 Mechanical Technicians for the removal/installation of the new bracket links.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.
Estimated Man-hours: - 24 hours for the Airframe Technician,
- 16 hours for the Mechanical Technician.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.
Helicopter downtime is estimated at 5 days.
1.H. WEIGHT AND BALANCE Modification 0728521:
There is no change in weight and moment.
Modification 0728904:
There is no change in weight and moment.
Modification 0728496:
- Weight: + 1.205 kg.
- Longitudinal moment: + 5.80 m.kg.
- Lateral moment: + 0.02 m.kg.
Revision 0 2021-08-19 Page 6/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 Modification 0729044:
- Weight: + 0.070 kg.
- Longitudinal moment: + 0.367 m.kg.
- Lateral moment: - 0.004 m.kg.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Standard Practices Manual (MTC):
MTC: 20-02-05-404: Assembly by screws and nuts - Joining MTC: 20-02-06-404: Safetying with cotter pins - Safetying and locking assemblies MTC: 20-02-07-403: Use of Vernelec 43022 varnish MTC: 20-02-09-101: Crack detection through dye-penetrant inspection: General - Crack detection MTC: 20-02-09-601: Checking structural parts / components using the dye penetrant procedure - Crack MTC: 20-04-01-102: Use of cleaning products on individual parts and on helicopters - Cleaning MTC: 20-04-04-403: Touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200) - Surface treatment before painting MTC: 20-04-05-101: Painting equipments and paint touch-ups - General - Paint and primer application MTC: 20-04-05-402: Application of Epoxy primer P05 - P20 - Paint and primer application procedure MTC: 20-05-01-211: Sealing compound Mastinox 6856 K (CM 518) and 6856 H - General sealing procedures MTC: 20-05-01-223: Use of Sealing compounds sealing 1776 B2 / 1776 S - General sealing procedures MTC: 20-05-01-226: Application of Sealing Compound PR 1782 B2 - General sealing procedures MTC: 20-05-01-227: Application of Jointing Compound CA 1010 - General sealing procedures MTC: 20-06-01-407: Application of EC adhesive 2216 B/A (CM 664) - Bonding with adhesives MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-101: Drafting and updating the log card (F-M) - General rules applicable to aircraft MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft Revision O 2021-08-19 Page 7/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 Aircraft Maintenance Manual (MMA):
MMA: 53-00-00-611: General Standard Maintenance Instructions - GENERAL.
MMA: 53-26-00-061: MGB Attachment Fitting Removal-Installation - FITTINGS AND MOUNTS.
MMA: 53-26-00-212: Check of tightening torques - FITTINGS AND MOUNTS MMA: 62-10-00-061: Removal/Installation - MAIN ROTOR BLADES.
Information Notice:
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3686-1-00: GENERAL Publishing of complementary Instructions for Continued Airworthiness through Delivery Notes IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight Safety Promotion Notice (SPN):
SPN: 3703-P-00: Foreign Object Damage prevention
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
ALERT SERVICE BULLETIN, THE OPERATOR
MUST MAKE SURE THAT ALL THE MAINTENANCE
DOCUMENTS NECESSARY FOR
MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF THEY ARE NOT AVAILABLE,
OPERATOR CONTACT
HELICOPTERS TO GET THESE DOCUMENTS.
The changes to Instructions for Continued Airworthiness (ICA) which are required as a result of this SB will be incorporated in the next Normal Revision. Refer to DN.002.0017 until the information is available in the published technical documentation NOTE 4 You can find more information about Delivery Notes in Information Notice IN 3686-1-00.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
1.M.1. Modification 0728521:
Not applicable.
1.M.2. Modification 0728904:
Not applicable.
Revision 0 2021-08-19 Page 8/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065
1.M.3. Modification 0728496:
Interchangeability:
PRE MOD 0728496 and POST MOD 0728496 components are not interchangeable.
Mixability:
Mixing between PRE MOD and POST MOD 0728496 components is prohibited.
1.M.4. Modification 0729044:
Not applicable.
Revision 0 2021-08-19 Page 9/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.
Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.
NOTE 2 The guide for the cutout of the X3855 frame (zz) (modification 0728521) can be used for multiple helicopters.
Only one will be delivered per maintenance workshop.
2.B. LOGISTIC INFORMATION Not applicable.
Revision 0 2021-08-19 Page 10/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:
New Old Key Word Qty P/N Item P/N Instruction MK2/MK2+ MGB 332A07-2849-6071 bracket link MGB front bracket 4 332A22-3643-20 1 332A22-1613-21 or Discard screw 332A22-1613-20 Front cylindrical 4 332A22-3647-20 2 bobbin Concave washer 332A22-3656-20 330A22-0136-20 Discard ø 12.5 Flat washer 332A22-3651-20 4 ø 12.5 Convex washer ø 12.5 4 332A22-3655-20 5 330A22-0137-20 Discard Front peel shim 332A22-3653-20 6 332A22-1665-51 Discard Lining 8 332A22-3649-20 7 Flat washer 332A22-3651-22 8 ø 12.5 Bi-hexagonal 8 ECS2271BH120N 9 ASNA0045BC120L Discard deformation nut Convex washer 332A22-3657-20 10 330A22-0139-20 Discard ø 10.5 MGB rear bracket 8 332A22-3644-20 11 332A22-1614-20 Discard screw bobbin Rear cylindrical 332A22-3648-20 12 Flat washer 16 332A22-3652-20 13 ø 10.5 Concave washer 8 332A22-3658-20 14 330A22-0138-20 Discard ø 10.5 LH rear peel shim 1 332A22-3654-20 15 332A22-1666-55 Discard Lining 16 332A22-3650-20 16 Flat washer 16 332A22-3652-22 17 ø 10.5 Bi-hexagonal deformation nut 16 ECS2271BH100N 18 ASNA0045BC100L Discard RH rear peel shim 1 332A22-3654-21 19 332A22-1666-56 Discard Split pin 12 23310CA020025 20 23310CA020025 Discard LH shim 1 332A22-3653-21 21 LH rear shim 1 332A22-3654-22 22 RH rear shim 1 332A22-3654-23 23 NOTE 3 The number of nuts (9) and (18) has been doubled in relation to the needs of this ALERT SERVICE BULLETIN.
Revision 0 2021-08-19 Page 11/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed
AIRBUS HELICOPTERS No. EC225-53A065 New Old Key Word Qty P/N Item P/N → Instruction Retrofit kit, 26° beam attachment 332A07-2890-4071 gussets LH attachment 1 332A22-1730-21 31 gusset RH attachment 1 332A22-1730-20 32 gusset Flat round-head 8 ECS2151DXJ3211 33 rivet Flat round-head 20 ASNA2050DXJ4011 34 rivet Flat round-head 44 ECS2151DXJ3207 35 rivet Flat round-head 8 ASNA2050DXJ4009 • 36 rivet Countersunk 100° 24 ASNA2049DXJ4010 37 rivet Flat round-head 8 21215DC3208J 38 rivet Flat round-head 4 21215TB4010 39 rivet Locking hexagonal 14 ASN52320BH050N • 40 nut Locking hexagonal 16 ASN52320BH060N 41 nut NOTE 4 There are twice the number of the rivets (33) to (39) and the nuts (40) (41) required this ALERT SERVICE BULLETIN.
Equipment or parts to be ordered separately:
New Old Key Word Qty Item P/N P/N Instruction Cowling LH rail 1 332A58-1341-20 30 shim Locking hexagonal 6 ASN52320BH050N 40 nut Cowling RH rail 1 332A58-1341-21 44 shim Countersunk head 6 22256BC050018L 45 screw Revision 0 2021-08-19 Page 12/76 Revision 4 2024-05-28 This document is available on the Internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - FR_EC_NotListed