Service bulletin · Airbus Helicopters

Revision 1Airbus Helicopters ASB No. EC225-56A013 Rev 1 · 38 pages · 2.2 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-0160, the docket of AD 2023-08-06. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-0160 (document 0004) · AD 2023-08-06

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC225-56A013
Latest revision known
EC225-56A013, Revision 1, dated February 10, 2020

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 2

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 38Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2023-0160, the docket of AD 2023-08-06. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'd66a342ee9c809d998f1ccea8a98b9c5927b4f8dc029b9b0706da467ad18de4c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013 Civil version: LP

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE WINDOWS - Cabin jettisonable windows Improvement to the window jettisoning Corresponds to modification 0728370 or 332P087142.00 or 332P087142.03 For the attention of Revision No. Date of issue Revision 0 2019-04-10 Revision 1 2020-02-10 Summary:

This ALERT SERVICE BULLETIN consists in further improving the jettisoning of windows from inside the cabin, by replacing the instructions defined in ALERT SERVICE BULLETIN No. 05A046.

Reason for last Revision:

The purpose of revision 1 of this ALERT SERVICE BULLETIN is to cancel effectivity for helicopters with serial numbers: 2663, 2666, 2670, 2673 and 2742.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Revision 0 2019-04-10 Page 1/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters PRE-MOD 0728370 or 332P087140.00 or 332P087142.00 or 332P087142.03 except serial numbers 2663, 2666, 2670, 2673, 2678 and 2742.

NOTE 1 Modification 332P087140.00 consists in improving the jettisoning of VIP windows and can be embodied through ALERT SERVICE BULLETIN No. 56C012.

NOTE 2 MOD 0728370 consists in improving the jettisoning system of the 5 mm thickness windows. Modifications 332P087142.00 and 332P087142.03 consist in improving the jettisoning system of the 6.3 mm thickness windows.

These modifications are the subject of this ALERT SERVICE BULLETIN.

NOTE 3 The helicopters with serial numbers 2663, 2666, 2670, 2673, 2678 and 2742 are not concerned by this ALERT SERVICE BULLETIN.

1.A.2. Non-installed equipment or parts On removable doors and panels.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

Revision 0 2019-04-10 Page 2/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

1.C. REASON Revision 0:

Airbus Helicopters introduced a protective measure through the ALERT SERVICE BULLETIN No. 05A046, which consisted in installing a PTFE skin film between the frame and the seal of jettisonable windows, to reduce the level of effort required for jettisoning.

Airbus Helicopters has developed an improvement which consists in removing the PTFE skin and installing silicone seals instead of the seals currently installed on the helicopter cabin windows.

This ALERT SERVICE BULLETIN supercedes the instructions given in ALERT SERVICE BULLETIN No. 05A046.

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Revision 1 :

The specific configuration of helicopters with serial numbers 2663, 2666, 2670, 2673 and 2742 has led Airbus Helicopters to define a specific rework solution for them.

Consequently the purpose of revision 1 of this ALERT SERVICE BULLETIN is to cancel effectivity for helicopters with serial numbers: 2663, 2666, 2670, 2673 and 2742.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- Removing, if installed, the PTFE skin present between the door frame and the cabin windows.

- Measuring the thickness of each window.

- Measuring the clearance between each window and the structure.

- Replacing the seals of cabin windows with silicone seals.

- Returning the response form.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

Revision O 2019-04-10 Page 3/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

1.E.2. Compliance in service The work must be performed on the helicopter by the operator.

Helicopters/installed equipment or parts:

Comply with paragraph 3.B. as per table No. 1 below:

Table No. 1 Helicopters Conditions Compliance time Paragraphs to comply with within 250 flying hours or 6 months (the first limit Configuration 1 reached is applicable) as 3.B.1.a.

thickness window): Helicopters defined (5mm (.196 in) Helicopters which do not operate over water from receipt of this ALERT SERVICE BULLETIN at the date mentioned in З.В.З.а. 3.B.3.b. 3.В.2.

in paragraph 1.A.1. except for the following within 110 flying hours or 6 months (the first limit page footer. 3.B.3.c. 3.В.3.е. 3.B.4.

2648, 2718, 2731, helicopters (S/N): Helicopters which operate over water from receipt of this ALERT reached is applicable) as 3.B.7.a. 3.В.5.а. 3.B.6.

2885, 2901. SERVICE BULLETIN at

3.B.8.

the date mentioned in page footer.

within 250 flying hours or 6 Configuration 2 Helicopters which do not operate over water from receipt of this ALERT reached is applicable) as SERVICE BULLETIN at months (the first limit 3.B.3.b. 3.B.1.b. З.В.З.а. 3.B.2.

(6.3mm (.248 in) the date mentioned in thickness window): Helicopters (S/N): within 110 flying hours or 6 page footer. 3.B.3.e. 3.B.3.d.

2648, 2718, 2731, months (the first limit 3.B.5.b. 3.В.4.

2885, 2901. reached is applicable as Helicopters which operate 3.B.6.

from receipt of this ALERT over water 3.B.7.0.

SERVICE BULLETIN at the date mentioned in 3.B.8.

page footer.

Non-installed equipment or parts:

Comply with paragraph 3 of this ALERT SERVICE BULLETIN before installing on the helicopter.

Revision 0 2019-04-10 Page 4/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

1.F. APPROVAL Approval of modifications:

Configuration 1 The information or instructions relate to modification 0728370, which was approved on March 07, 2019 by the EASA for civil version helicopters subject to an Airworthiness Certificate.

Configuration 2 The information or instructions relate to modifications 332P087142.00 and 332P087142.03, which was approved on December 19, 2018 under the EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on April 04, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on April 04, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on February 03, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on February 03, 2020 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications Qualification: - 1 Airframe Technician to remove the PTFE skin,

- 2 Airframe Technicians to remove /install the windows.

The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours: 2 hours per windows for the 2 Airframe Technicians.

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at 6 days including time for the removal /installation of the coverings.

1.H. WEIGHT AND BALANCE Not applicable.

Revision 0 2019-04-10 Page 5/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN:

Standard Practices Manual (MTC):

- MTC: 20-02-05-404: Assembly by screws and nuts - Joining.

- MTC: 20-04-01-102: Use of cleaning products on individual parts and on aircraft - Cleaning.

- MTC: 20-04-01-402: Cleaning of removed individual parts with liquid solvents - Cleaning.

- MTC: 20-05-01-212: Implementation of Sealing compound CM 6232 - General sealing procedures

- MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions.

- MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions.

Aircraft Maintenance Manual (MMA):

- MMA: 56-20-00-051: Removal - Installation - CABIN WINDOWS.

- MMA: 56-20-00-212: Check of Clearance Between Jettisonable Window Seal and Cabin Covering - CABIN WINDOWS.

1.L. OTHER AFFECTED PUBLICATIONS The modification will be integrated into:

- Illustrated Parts Catalog (IPC),

- The Aircraft Maintenance Manual (MMA).

The MMA will be updated as part of a future revision.

The update of the IPC must be ordered by the customer.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

The PRE MOD and POST MOD seals are not interchangeable.

The PRE MOD and POST MOD seal keys are not interchangeable.

Mixability:

Having PRE MOD window assemblies (seal, seal keys and PTFE skin) and POST MOD window assemblies (seal and seal keys) on the same helicopter is authorized.

Revision 0 2019-04-10 Page 6/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013 2_ EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT For any information about the kits and/or components, contact the Airbus Helicopters Network Sales & Customer Relations Department.

Delivery deadlines will be indicated by Sales and Customer Relations Department on Operator's request.

Order the required quantities from the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specity the mode of transport, the destination and the serial numbers of the helicopter to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4 42 85 99 96.

2.B. LOGISTIC INFORMATION For any information, contact the Sales and Customer Relations Department.

Revision O 2019-04-10 Page 7/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT NOTE 3 The quantities of components necessary for a helicopter can differ as per configuration. It is not necessary to use all these components.

Kit to be ordered for a configuration 1 helicopter:

New P/N Old Key Word Qty Item P/N → Instruction 5 mm window seal 332A07-2837-0071 85D kit 85D silicone 151601505M 1 window seal (704A39-8210-66) 85D silicone 151601506N window seal key 2 (704A39-8210-67) 2 Key extraction tape 332A23-0520-04 З Window extraction 8 332A23-0520-07 4 tape Simple key 4 332A23-0520-06 5 extraction tape Flat washer 23111AG04OLE 6 Self-locking nut 8 ASN52320BH040N 7 Round head screw A0099BC040016L 8 Flat washer 8 23112AG04OLE 9 Kit to be ordered for a configuration 2 helicopter:

New P/N Old Key Word Qty Item P/N →→ Instruction

6.3 mm window 332P08-7142-0071 seal 85D kit 85D silicone 151601505M 1 window seal (704A39-8210-66) 85D silicone 151601506N 2 window seal key (704A39-8210-67) Key extraction tape 8 332A23-0520-04 Window extraction 8 332A23-0520-07 4 tape Simple key 8 332A23-0520-06 5 extraction tape Flat washer 8 23111AG04OLE 6 Self-locking nut ASN52320BH040N 7 Flat washer 23112AG04OLE 9 Round head screw 8 A0099BC040018L 16 Revision 0 2019-04-10 Page 8/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013 Consumables to be ordered separately:

As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN and list below:

Key Word Qty Consumables P/N Ite Cleaning agent (Gasoline G) N8955004956 CM 232 10 Or AR Petrol ether AR Off the shelf 10 Sealing compound AR ECS 6046-1198 CM 6232 11 Webbed adhesive tape AR Type 3M 22888 or equivalent 12 Adhesive tape AR DHS171-143.21 CM 6229 13 Abrasive paper, 80-grit AR Off the shelf 14 PTFE skin AR SCOTCH PTFE 5480 - 25.4MM 15 The consumables can be ordered separately from the following companies:

Aviatec global aviation Website : www.aviatec.net Telephone: +33 1.34.46.45.24 or +49 4193 8803 630 Fax : +33 1.34.46.45.26 or +49 4193 8803 699 AOG : +49 4193 8803 660 AOG email : aog @aviatec.aero BDSI Website : www.boeingdistribution.com Telephone: +1.305.925.2600 Fax : +1.305.507.7191 AOG : +1.305.471.8888 AOG email : AOGdesk@Boeingdistribution.com Gaches chimie Website : www.gaches.com Telephone : +33 5.61.31.64.45 Fax: +33 5.61.40.98.63 AOG email : marketplace@gaches.com Revision 0 2019-04-10 Page 9/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013 Special tools:

Key Word Qty Tool P/N or equivalent Item Tool kit KA6420 Spatula, rounded end 770150225 (commercial P/N) ZZ Tube cutter Off the shelf (Virax 215032) Insertion tool Off the shelf (LT 415) Spatula, curved 1479N/S5 ("Beta" supplier P/N) ww Key Word Qty Tool P/N or equivalent Item Measurement kit 332A98-8701-00 Collet 5 Thickness: 8mm VV Key Word Qty Tool P/N or equivalent Item Digital caliper gage Off the shelf uu

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision O 2019-04-10 Page 10/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- Read and comply with the instructions on assembly by screws and nuts as per Work Card 20-02-05-404 (MTC).

- Read and comply with the instructions for use of cleaning products on individual parts and on aircraft as per Work Card 20-04-01-102 (MTC).

3.B. WORK STEPS NOTE 1 The installation of new seals (1) and seal keys (2) must be done dry.

NOTE 2 The quantity, location and dimensions of the cabin windows can differ as per the configuration of the helicopter, but the procedure is identical.

Compliance with the procedure for installing the seals is described in a video, which is accessible by following the link below:

http://dai.ly/k3DklgBuVI85w|pfkm2

3.B.1. Preliminary steps (Configurations 1 and 2)

- Disconnect all electrical power supplies as per Work Card 20-07-03-406 (MTC).

- Install the access equipment.

- Remove all coverings to get access to the different work areas.

3.B.1.a. Configuration 1 (Figures 1 and 2)

- Identify the location of the internal extraction tapes or handles (as per Appendix 4.C.) of the seal keys (o) and (p) (not shown in the Figure) before removing them.

- Remove the cabin windows (g) to (g11) Figure 1 as per Task 56-20-00-051 (MMA).

- Record the cabin window part numbers on the response form in Appendix 4.A.

- As per Figure 2 Sections C-C and D-D:

• Remove the nuts (r), washers (t), screws (u), extraction tapes (w), (x) and (y), inside extraction tapes or handles (o) and (p) (not shown in the figure) and the press-studs (v).

. Keep the press-studs (v) and the inside extraction tapes or handles (o) and (p).

Revision 0 2019-04-10 Page 11/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC225-56A013

3.B.1.b. Configuration 2 (Figures 3 or 4 and 5) NOTE 3 For helicopters (S/N) 2648, 2718 and 2731, refer to figures 3 and 5 with the windows (g12) to (g23).

For helicopters (S/N) 2885 and 2901, refer to figures 4 and 5 with the windows (g24) to (g35).

- Identify the location of the internal extraction tapes or handles (as per Appendix 4.C.) of the seal keys (o) and (p) (not shown in the Figure) before removing them.

- Remove cabin windows (g12) to (g23) or (g24) to (g35) Figure 3 or 4 as per Task 56-20-00-051 (MMA).

- Record the cabin window part numbers on the response form in Appendix 4.B.

- As per Figure 5 Sections D-D and E-E:

• Remove the nuts (r), washers (t), screws (u), extraction tapes (w), (x) and (y), inside extraction tapes or handles (o) and (p) (not shown in the figure) and the press-studs (v).

. Keep the press-studs (v) and the inside extraction tapes or handles (o) and (p).

3.B.2. Removing the PTFE skin (Configurations 1 and 2)

- If installed:

• Remove the PTFE skin (s) from the window frame, using a spatula (zz).

• Discard the PTFE skin (s).

- Clean the window frame using cleaning agent (10) as per Work Card 20-04-01-402 (MTC).

Revision 0 2019-04-10 Page 12/38 Revision 1 2020-02-10 This document is available on the Internet:www.airbushelicopters.com/techpub